LIGHTEAILING 10255

LIGHTAILING LED Light Kit for LEGO Creator Expert The Assembly Square (Model 10255)

Manual de instructiuni

1. Produs terminatview

This LIGHTAILING LED Light Kit is designed to illuminate the LEGO Creator Expert The Assembly Square building set (LEGO Model 10255). The kit enhances the visual appeal of your model by adding intricate lighting details.

Conținut kit:

  • 5 USB Light kits
  • Ghid de instrucțiuni
  • Cutia bateriei
  • Conector USB 1

The components are crafted from original materials and assembled by hand to ensure quality and compatibility.

Contents of the LIGHTAILING LED Light Kit package, including light strings, battery box, and instructions.
Figure 1: Package contents of the LIGHTAILING LED Light Kit. This image displays the various components included in the kit, such as individually packaged light strings, a battery box, and the instruction manual.

2. Configurare și instalare

The LIGHTAILING LED Light Kit is designed for integration with your existing LEGO Creator Expert The Assembly Square (Model 10255) set. Please note that the LEGO model itself is not included with this light kit.

Cerințe de alimentare:

  • Three (3) AA batteries (not included) are required for the battery box.
  • Alternatively, a USB charger can be used. Ensure the voltage is less than 5V to prevent damage to the lights.

Ghid de instalare:

  1. Refer to the included instruction guide for detailed, step-by-step installation procedures.
  2. Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components to prevent damage.
  3. The installation process may involve disassembling parts of your LEGO model to properly route and secure the light wires.
  4. Plan the placement of wires to ensure they are discreet and do not interfere with the model's structure or appearance.
Diagram showing steps for installing the LED light kit into a LEGO model.
Figura 2: Example installation steps. This diagram illustrates how to integrate the LED light components into the LEGO building set, showing careful placement of wires and lights.
Video 1: Demonstration of the LIGHTAILING LED Light Kit installed on the LEGO Creator Expert The Assembly Square. This video showcases the illuminated model from various angles, highlighting the effect of the installed lights.

3. Instrucțiuni de utilizare

Once the LIGHTAILING LED Light Kit is fully installed and connected to a power source (either AA batteries in the battery box or a USB charger), the lights will illuminate your LEGO model.

  • Pentru a porni: Ensure batteries are correctly inserted into the battery box or the USB connector is plugged into a compatible 5V USB power source.
  • Pentru a opri: Disconnect the USB connector from the power source or remove the batteries from the battery box.

There are no additional controls for brightness or light patterns; the lights operate in a steady-on mode when powered.

4. Întreținere

Proper maintenance ensures the longevity and optimal performance of your LIGHTAILING LED Light Kit.

  • curatenie: Gently dust the LED lights and wires with a soft, dry cloth. Avoid using liquid cleaners directly on the electrical components.
  • Managementul firelor: Periodically check that all wires are securely in place and not pinched or strained. Re-route any loose wires to prevent damage.
  • Înlocuire baterie: If using batteries, replace all three AA batteries simultaneously when lights begin to dim or cease to function. Do not mix old and new batteries.
  • Depozitare: If storing the LEGO model with the light kit installed, ensure it is kept in a dry, dust-free environment away from direct sunlight and extreme temperatures.

5. Depanare

If you encounter issues with your LIGHTAILING LED Light Kit, refer to the following troubleshooting steps:

  • Lights Not Illuminating:
    • Verify that the power source (batteries or USB charger) is correctly connected and functional.
    • If using batteries, ensure they are new and inserted with the correct polarity.
    • Check all connections between the light strings and the USB connector/battery box for secure fit.
    • Inspect wires for any visible damage, such as cuts or pinches.
  • Lights Are Dim:
    • If using batteries, they may be low and require replacement.
    • If using a USB charger, ensure it provides sufficient power and is functioning correctly.
  • Luminile individuale nu funcționează:
    • Carefully check the connection of the specific light or light string.
    • Inspect the individual LED for physical damage.

If these steps do not resolve the issue, please contact LIGHTAILING customer support for further assistance.

6. Specificații

CaracteristicăDetaliu
MarcaLIGHTAILING
Numărul de model10255
Dimensiunile produsului7.68 x 5.71 x 1.77 inci (ambalaj)
Greutatea articolului7.1 uncii
Sursa de alimentare3 AA batteries (not included) or USB charger (<5V)
Vârsta recomandată de producător6 ani în sus
CompatibilitateLEGO Creator Expert The Assembly Square (Model 10255)

7. Garanție și asistență

LIGHTAILING is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, if you encounter any issues or have questions regarding your LED Light Kit, please contact LIGHTAILING customer service.

For support, refer to the contact information provided in your product packaging or visit the official LIGHTAILING website-ul.

Documente conexe - 10255

Preview LIGHTAILING LED Lighting Kit Installation Guide for LEGO Creator Expert Corner Garage (10264)
Step-by-step instructions for installing the LIGHTAILING LED lighting kit on the LEGO Creator Expert Corner Garage set 10264. Includes warnings, assembly guidance, and contact information.
Preview LIGHTAILING Cozy House 31139 Lighting Kit Installation Guide | LGK569
Step-by-step instructions for installing the LIGHTAILING LED lighting kit for the LEGO Creator 3-in-1 Cozy House 31139 (Item No. LGK569). Enhance your building block model with this easy-to-follow guide.
Preview Lightailing LED Lighting Kit Instructions for LEGO NASA Apollo Saturn V 21309
Detailed instructions for installing the Lightailing LED lighting kit (BX118) for the LEGO Creator Expert NASA Apollo Saturn V 21309 set. This guide provides step-by-step assembly for enhancing the model with lights.
Preview Ghid de instalare pentru kit de iluminare LED Lightailing pentru LEGO Assembly Square 10255
Instrucțiuni detaliate pentru instalarea kitului de iluminare LED Lightailing pentru setul LEGO Creator Expert Assembly Square (10255). Aflați cum să iluminați modelul cu îndrumări pas cu pas.
Preview Lightailing LED Lighting Kit for LEGO Creator Expert NASA Apollo 11 Lunar Lander 10266 - Installation Guide
Detailed instructions for installing the Lightailing LED lighting kit (LGK211) for the LEGO Creator Expert NASA Apollo 11 Lunar Lander (10266) set. Enhance your model with custom lighting.
Preview Lightailing LED Lighting Kit for LEGO Parisian Restaurant 10243
Installation guide for the Lightailing LED lighting kit for the LEGO Creator Expert Parisian Restaurant (10243) set. Enhance your LEGO model with custom lighting.