1. Produs terminatview
The BFT Mitto B RCB04 R1 is a 4-channel remote control designed for operating garage doors and other compatible automated systems. It utilizes 433.92MHz frequency with rolling code technology for enhanced security. This remote is compact, ergonomic, and provides a reliable solution for controlling your automated access points.
Figura 1: BFT Mitto B RCB04 R1 4-channel remote control. This image shows the compact, dark-colored remote with four grey buttons and a red BFT logo in the center.
2. Informații de siguranță
Please read and understand all safety instructions before using this remote control. Failure to do so may result in injury or damage.
- Keep the remote control out of reach of children to prevent accidental operation of garage doors or gates.
- Do not operate the remote control unless the garage door or gate is in clear view și fără obstacole.
- Ensure that no persons or objects are in the path of the moving door or gate.
- Do not expose the remote control to water, extreme temperatures, or direct sunlight for prolonged periods.
- Aruncați bateriile în mod corespunzător, conform reglementărilor locale.
3. Conținutul pachetului
La deschiderea coletului, vă rugăm să verificați dacă toate articolele sunt prezente și nedeteriorate:
- 1 x BFT Mitto B RCB04 R1 4-channel remote control
- 1 x Pre-installed Alkaline Battery
- 1 x Instruction Manual (this document or similar)
4. Configurare și programare
The BFT Mitto B RCB04 R1 remote control is designed for easy programming. The exact programming procedure depends on your specific BFT garage door opener or receiver unit. Generally, programming involves placing your receiver into a 'learning' or 'programming' mode and then transmitting a signal from the new remote.
Pași generali de programare:
- Localizați receptorul: Identify the programming button or switch on your BFT garage door opener or external receiver unit. This is often labeled 'PROG', 'MEMO', or 'LEARN'.
- Activează modul de învățare: Press and hold the programming button on your receiver until an indicator light (LED) illuminates or changes state, indicating it is in learning mode. Refer to your opener's specific manual for precise instructions and timing.
- Semnal de transmisie: Within a few seconds of activating learning mode, press the desired button on your new BFT Mitto B RCB04 R1 remote control. Hold the button for 1-2 seconds.
- Confirmare programare: The receiver's indicator light should flash, change color, or turn off, confirming successful programming. Release the button on the remote.
- Funcționare de testare: After programming, test the remote control by pressing the programmed button to ensure it operates the garage door or gate correctly.
Nota: For detailed, model-specific programming instructions, please consult the user manual of your BFT garage door opener or receiver unit, or visit the official BFT website-ul.
5. Instrucțiuni de utilizare
Once programmed, operating the BFT Mitto B RCB04 R1 remote control is straightforward:
- Deschidere/Închidere: Press the programmed button on the remote control once to activate the garage door or gate. Pressing it again will typically stop the movement, and a third press will reverse the direction.
- Gamă: The remote control has an operating range of up to 150 meters in open areas. Environmental factors, such as walls, vehicles, and electronic interference, can reduce this range.
- Canale multiple: With four buttons, you can program each button to control a different garage door or gate, or to perform different functions on a single system (if supported by your receiver).
6. Întreținere
The BFT Mitto B RCB04 R1 remote control requires minimal maintenance. The primary maintenance task is battery replacement.
Înlocuire baterie:
When the remote's range decreases significantly or the indicator light (if present) fails to illuminate upon button press, it's likely time to replace the battery.
- Deschideți Casing: Deschideți cu grijă telecomanda casing. This usually involves prying it open along a seam with a small flat-head screwdriver or similar tool.
- Identify Battery: Locate the existing alkaline battery. Note its type (e.g., CR2032, A23, etc.).
- Scoateți bateria veche: Gently remove the old battery, taking care not to damage the battery contacts.
- Introduceți bateria nouă: Insert a new battery of the same type, ensuring correct polarity (+ and -).
- Închide Casing: Apăsați telecomanda casinfixați-le la loc în siguranță.
Nota: The remote comes with an alkaline battery included. Always use the specified battery type for optimal performance.
7. Depanare
If you encounter issues with your BFT Mitto B RCB04 R1 remote control, try the following troubleshooting steps:
- Telecomanda nu funcționează:
- Check the battery. Replace it if necessary (refer to Section 6).
- Ensure the remote is properly programmed to your receiver. If unsure, try reprogramming it (refer to Section 4).
- Verificați dacă unitatea receptorului este alimentată și funcționează corect.
- Interval redus:
- Replace the battery. A weak battery is the most common cause of reduced range.
- Check for sources of radio interference near the receiver or remote (e.g., other electronic devices, metal objects).
- Ensure the receiver's antenna is unobstructed and properly extended (if applicable).
- Funcționare intermitentă:
- This could indicate a low battery or intermittent interference.
- Ensure the remote's buttons are not stuck or damaged.
Dacă acești pași nu rezolvă problema, contactați serviciul de asistență pentru clienți sau un tehnician calificat.
8. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | RCB04 R1 |
| Frecvenţă | 433.92 MHz |
| Channels / Buttons | 4 |
| Tip de codare | Cod rulant |
| Material | Plastic |
| Caracteristica specială | Ergonomic |
| Sursa de alimentare | Baterie alcalina (inclusa) |
| Dispozitive compatibile | Garage Door Openers (BFT compatible) |
| Interval estimat | Până la 150 de metri (zonă deschisă) |
9. Garanție și asistență
This product is typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.
For technical support, programming assistance, or troubleshooting beyond the scope of this manual, please contact the product seller or the official BFT support channels. You may find contact information on the seller's website-ul sau pe ambalajul produsului.
