Produs terminatview
Image: The Progress Lighting Crofton 3-Light Chandelier, featuring a rustic pewter finish, brushed nickel accents, and three seeded glass shades housing exposed bulbs. The fixture is suspended by a chain.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Crofton 3-Light Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Informații de siguranță
AVERTIZARE: Risc de electrocutare. Deconectați alimentarea de la cutia de siguranțe sau de la întrerupătorul de circuit înainte de instalare sau service. Consultați un electrician calificat dacă nu sunteți sigur de cablajul electric.
- Asigurați-vă că toate conexiunile electrice respectă codurile și ordonanțele locale, precum și Codul Electric Național (NEC).
- Do not install this fixture in wet locations. Suitable for dry or damp numai locații.
- Utilizați numai tipul de bec și wat specificatetage. Exceeding maximum wattage poate provoca supraîncălzirea.
- Manipulați componentele din sticlă cu grijă pentru a preveni spargerea acestora.
- Țineți materialele inflamabile departe de corpul de iluminat în timpul funcționării.
Conținutul pachetului
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- Chandelier Frame Assembly (Rustic Pewter/Brushed Nickel)
- Seeded Glass Shades (3)
- Mounting Hardware Kit (includes mounting strap, screws, wire nuts)
- Canopy and Collar Ring
- Asamblarea lanțului
- Light Bulbs (3, if included with your specific package)
Configurare și instalare
Professional installation is recommended for optimal safety and performance. Follow these general steps for installation:
- Opriți alimentarea: Locate the circuit breaker or fuse box that supplies power to the fixture location. Turn off the power completely before proceeding.
- Pregătirea montajului: Secure the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is firmly attached.
- Ajustați lungimea lanțului: Determine the desired hanging height for your chandelier. Open a chain link to remove excess chain, if necessary. Thread the fixture wires through the chain and canopy.
- Conectare cablare: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts. Connect the bare copper ground wire from the fixture to the house ground wire. Connect the white fixture wire to the white (neutral) house wire. Connect the black fixture wire to the black (hot) house wire. Ensure all connections are secure.
- Copertină sigură: Tuck the connected wires neatly into the outlet box. Raise the canopy to the ceiling and secure it to the mounting strap using the collar ring.
- Instalați abajururi și becuri din sticlă: Carefully attach the seeded glass shades to the fixture. Insert the recommended light bulbs (not exceeding maximum wattage) into the sockets.
- Restabiliți puterea: După ce instalarea este finalizată și toate componentele sunt fixate, restabiliți alimentarea cu energie electrică la întrerupătorul de circuit sau la cutia de siguranțe.
Instrucțiuni de operare
This chandelier is designed for easy operation.
- Comutator de perete: The primary method of operation is via a standard wall switch connected to the fixture's power supply. Flip the switch to turn the chandelier on or off.
- Telecomanda: This fixture supports remote control operation. If a remote control unit was included or purchased separately, refer to its specific instructions for pairing and functionality. Typically, the remote allows for on/off control and potentially dimming functions, depending on the remote and bulb compatibility.
Întreţinere
Întreținerea regulată asigură longevitatea și aspectul candelabrului dumneavoastră.
- curatenie: To clean the fixture, turn off the power and allow it to cool. Wipe the metal surfaces with a soft, dry cloth. For glass shades, use a mild glass cleaner on a soft cloth, then wipe dry. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Înlocuire bec: Turn off the power and allow bulbs to cool completely before replacing. Unscrew the old bulb and screw in a new bulb of the same type and wattage. Refer to the specifications section for recommended bulb types.
Depanare
If your chandelier is not functioning correctly, consult the following common issues:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde | Fără putere la fixare Conexiunea cablajului slab Bec defect | Verificați întrerupătorul/siguranța Verificați dacă toate conexiunile firelor sunt sigure (opriți alimentarea) Înlocuiți becul |
| Luminile pâlpâie | Bec slăbit Dimmer incompatibil Cablaj slăbit | Strângeți becul Ensure dimmer is compatible with bulbs Verificați conexiunile cablurilor (opriți alimentarea) |
| Telecomanda nu funcționează | Bateriile telecomenzii sunt uzate Telecomanda nu este asociată Obstrucţie | Înlocuiți bateriile Refer to remote's pairing instructions Ensure clear line of sight to fixture's receiver |
If these steps do not resolve the issue, contact a qualified electrician or customer support.
Specificații
- Marca: Iluminare progres
- Model: Crofton (B07XM9JMTR)
- Tipul finisajului: Brushed Nickel, Rustic Pewter
- Număr de surse de lumină: 3
- Forma corpurilor de iluminat: Candelabru
- Sursa de alimentare: Electric cu fir
- Metoda de control: Telecomanda
- Dimensiuni produs: 20 x 12 x 17 inci
- Greutatea articolului: 10.53 lire sterline
- UPC: 785247218356
- Tip de montare: Montare pe tavan
- Culoare nuanță: Clear (Seeded Glass)
Garanție și suport
For warranty information or technical support, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Informații de contact: Refer to the Progress Lighting official website-ul sau ambalajul produsului pentru cele mai recente date de contact ale serviciului clienți.
