Introducere
This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Informații de siguranță
Instrucțiuni importante de siguranță
- Citiți cu atenție aceste instrucțiuni.
- Păstrați aceste instrucțiuni pentru referințe viitoare.
- Heed all warnings provided with the product and in this manual.
- Urmați toate instrucțiunile de instalare și utilizare.
- Nu utilizați acest aparat în apropierea apei sau în medii excesiv de umede.
- Curățați numai cu o cârpă uscată.
- Install the camera in accordance with the manufacturer's instructions and local electrical codes.
- Apelați la personal de service calificat pentru toate lucrările de service. Nu încercați să reparați singur acest produs.
Conținutul pachetului
Ce este inclus
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your supplier immediately.
- Pelco P2230L-ESR PTZ Network Camera
- Hardware de montare (șuruburi, ancore)
- Șablon de instalare
- Ghid de pornire rapidă
Produs terminatview
Componentele camerei
The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.
This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.
Caracteristici cheie
- Senzor: 1/3-inch CMOS Sensor
- Rezoluţie: 1920 x 1080 (Full HD 1080p)
- Obiectiv: 4.3 mm ~ 129 mm varifocal Lens
- Zoom optic: 30x
- Iluminare IR: 850 nm, up to 150 m range
- Codificare video: H.265, H.264, and MJPEG
- Interval de înclinare: +15° to –90°
- Performanță la lumină scăzută: Down to 0.3 lux
- Gamă dinamică largă (WDR): 100 dB
- Detectare: Sabotage and Simple Motion Detection
- Evaluarea mediului: IP66 weatherproof for outdoor use
Înființat
Ghid de instalare
The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.
This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.
Cablaje și conexiuni
- Conexiune de alimentare: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
- Conexiune retea: Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
- Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.
This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.
Configurația inițială a rețelei
After physical installation, access the camera's web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.
Funcționează
Funcționarea camerei
Accesarea Web Interfață
Deschide a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web interface provides access to live view, recording settings, motion detection, and PTZ controls.
Pan-Tilt-Zoom (PTZ) Control
Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.
- Tigaie: Rotates the camera horizontally to cover a wider area.
- Înclinare: Adjusts the camera's vertical angle to look up or down.
- Zoom: Magnifies or de-magnifies the view. The camera features a powerful 30x optical zoom for detailed observation.
Înregistrare și stocare
Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.
Detectarea mișcării
Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.
Întreţinere
Îngrijire și întreținere
Curatenie
Regularly clean the camera's lens and housing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.
Actualizări de firmware
Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.
Considerații de mediu
Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.
Depanare
Probleme comune și soluții
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără flux video | Power issue, network cable disconnected, incorrect IP address, camera malfunction | Check power supply, verify network cable connection, confirm IP address and network settings. Restart the camera. |
| Calitate slabă a imaginii | Dirty lens, improper focus, low light conditions, network bandwidth limitations | Clean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings. |
| Comenzile PTZ nu răspund | Network connectivity issues, software glitch, camera malfunction, incorrect user permissions | Verify network connection, restart the camera, update firmware, check user permissions in the web interfata. |
| Detectarea mișcării nu funcționează | Incorrect sensitivity settings, detection zones not configured, event actions not set | Adjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured. |
| Nu se poate accesa web interfață | Incorrect IP address, firewall blocking, network issue, browser compatibility | Confirm camera's IP address, check local network settings and firewall rules. Try a different web browser. |
| IR illumination not working | IR sensor blocked, setting disabled, hardware fault, insufficient power | Ensure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists. |
Specificații
Specificatii tehnice
- Model: P2230L-ESR
- Senzor: 1/3-inch CMOS Sensor
- Rezoluţie: 1920 x 1080 (Full HD 1080p)
- Obiectiv: 4.3 mm ~ 129 mm varifocal Lens
- Zoom optic: 30x
- Interval IR: Up to 150 m (850 nm IR Illumination)
- Codificare video: H.265, H.264, MJPEG
- Interval de înclinare: +15° to –90°
- Lumină scăzută: Down to 0.3 lux
- Gamă dinamică largă (WDR): 100 dB
- Frecvența cadrelor: Up to 60 Images per Second (ips)
- Detectare: Sabotage and Simple Motion Detection
- Evaluare de protecție internațională: IP66 (rezistent la intemperii)
- Tip de montare: Montare pe perete
- Conectivitate: Wi-Fi (Wireless Communication Technology)
- UPC: 700880346648
Garanție și suport
Product Warranty and Customer Support
For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.
For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.
You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco website: www.pelco.com
