1. Introducere
Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.
2. Produs terminatview
Caracteristici cheie
- Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
- Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
- Luminozitate: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
- Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
- Wireless și ușor de instalat: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.
Ce este în cutie
- 1 x Battery powered ceiling light
- Mounting hardware (screws, anchors, fixing plug)
- Bateriile NU sunt incluse.
Imagini de produs
3. Configurare și instalare
The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:
- Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
- Instalați bateriile: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
- Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
- Montați placa de bază: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
- Attach the Light Unit: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
- Îndepărtați filmul de protecție: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.
4. Instrucțiuni de utilizare
Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:
- Modul lumina zilei: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
- Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.
The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.
5. Întreținere
- Înlocuire baterie: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
- curatenie: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Durată de viață a LED-urilor: The integrated LED lights are designed for a long lifespan and do not require replacement.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | 1. Bateriile sunt descărcate sau instalate incorect. 2. Light mode is set incorrectly for ambient light conditions. 3. No motion detected within range. | 1. Replace batteries and ensure correct polarity. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle. |
| Lumina rămâne aprinsă constant. | 1. Continuous motion detected. 2. Light mode is set to 'Daylight' in a constantly bright area. | 1. Ensure no continuous motion is within the sensor's range. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness. |
| Lumina este slabă. | Bateriile sunt slabe. | Replace all 4 D-cell batteries. |
| Senzorul de mișcare nu răspunde. | 1. Sensor is obstructed or dirty. 2. Incorrect installation height. | 1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft). |
7. Specificații
| Caietul de sarcini | Valoare |
|---|---|
| Marca | PREA BINE |
| Model | Update Daylight Motion Sensor Light |
| Tip sursă de lumină | LED (SMD2835) |
| Luminozitate | 400 lumeni |
| Temperatura de culoare | 5000 Kelvin |
| Sursa de alimentare | 4 D-cell Batteries (Not Included) |
| Unghiul senzorului de mișcare | 120 de grade |
| Interval de detectare a mișcării | Până la 20 de picioare |
| Temporizator de oprire automată | 20 de secunde (după nicio mișcare) |
| Dimensiunile produsului | 7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H) |
| Greutatea articolului | 14.4 uncii |
| Material | Acrilonitril Butadien Stiren (ABS) |
| Tip de instalare | Spălați montura |
| Utilizare în interior/exterior | Numai pentru utilizare în interior |
8. Garanție și asistență
Informații despre garanție
Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
Asistență pentru clienți
If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL website-ul.
When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.
