Introducere
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
Informații de siguranță
Respectați întotdeauna următoarele instrucțiuni de siguranță pentru a preveni electrocutarea, incendiul sau vătămările corporale:
- Asigurați-vă că sursa de alimentare este deconectată înainte de instalare sau întreținere.
- Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu codurile electrice locale.
- Nu expuneți lamp la umiditate excesivă sau temperaturi extreme.
- Nu încercați să deschideți sau să modificați lamp housing, as this may void the warranty and pose a safety risk.
- Păstrați materialele de ambalare departe de copii.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente și nedeteriorate:
- Beghelli 19432 LED Emergency Lamp unitate
- Integrated Li-Fe Battery
- Accesorii de montare (șuruburi, dibluri)
- Manual de utilizare (acest document)
Configurare și instalare
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- Alegeți o locație: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- Pregătiți suprafața de montare: Ensure the wall surface is clean, dry, and capable of supporting the lampgreutatea lui.
- Marcați punctele de găurire: Folosiți lamp's mounting holes as a template to mark the drilling points on the wall.
- Găuri: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- Introduceți dibluri de perete: Introduceți diblurile de perete furnizate în găurile forate.
- Montați Lamp: Asigurați lamp to the wall using the provided screws. Ensure it is firmly attached.
- Conectare alimentare: Conectați lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- Taxă inițială: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
Instrucțiuni de operare
The Beghelli 19432 operates automatically:
- Funcționare normală: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- Modul de urgență: În cazul unei pene de curent, lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- Revenirea la normal: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
Întreţinere
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- curatenie: Curățați lampȘtergeți exteriorul cu o cârpă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.
- Verificare baterie: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- Înlocuire baterie: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp Înlocuire: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
Depanare
Consultați tabelul de mai jos pentru problemele comune și soluțiile acestora:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lamp nu se aprinde în timpul întreruperii alimentăriitage. | Bateria nu este încărcată sau este defectă. Cablare incorectă. Lamp vina. | Asigurați-vă că lamp has been connected to power for at least 24 hours. Verificați conexiunile cablajului. If problem persists, contact qualified service personnel. |
| Lamp rămâne aprins în mod constant. | Problemă cu sursa principală de alimentare. Defecțiune internă. | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | Degradarea bateriei. Încărcare insuficientă. | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | 19432 |
| Marca | Beghelli |
| Sursă de lumină | LED |
| Flux luminos | 1200 lumeni |
| Consumul de energie | 24 Watt |
| Tip baterie | Li-Fe (Lithium Iron) |
| Material | Policarbonato (Polycarbonate) |
| Culoare | Alb |
| Zona de aplicare | Commercial, Emergency Exit |
| Tip de montare | Wall Mount (Parete) |
| Tip comutator | Automat |
| Prima disponibilă | 16 mai 2019 |
Garanție și suport
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli website-ul sau pe ambalajul produsului.
Informații despre reciclare: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.





