1. Introducere
Thank you for choosing the Klarstein Kronleuchter Island Extractor Hood. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.
1.1 Instrucțiuni importante de siguranță
- Asigurați-vă că sursa de alimentare voltagcorespunde cu plăcuța cu datele tehnice de pe aparat.
- Instalarea trebuie efectuată de către un tehnician calificat, în conformitate cu reglementările locale.
- Deconectați întotdeauna aparatul de la sursa de alimentare înainte de curățare sau întreținere.
- Nu flambați sub hota.
- Aparatul este doar pentru uz casnic.
- Nu lăsați copiii la îndemâna aparatului în timpul funcționării și curățării.
2. Produs terminatview
The Klarstein Kronleuchter is an island extractor hood designed for ceiling mounting above freestanding cooktops. It features a recirculation system to effectively remove cooking odors and steam from your kitchen.
Figura 1: Față view of the Klarstein Kronleuchter Island Extractor Hood.
2.1 Caracteristici cheie
- Island Design: Ceiling-mounted for freestanding cooktops.
- Eficiență energetică: Rated Class A for economical operation.
- Purificarea aerului: Washable aluminum grease filter and optional activated carbon filters for odor removal.
- Economie de spațiu: Floating installation above the stove for comfortable cooking.
- SenseControl: Easy operation via an LED touch panel.
- Iluminare integrată: Two 1.5 Watt LED lights provide illumination for the cooking area.
- Design estetic: Front and back made of white safety glass, with brushed stainless steel sides.
- Performanţă: 60 cm wide with 165 Watt motor power and 3 selectable circulation modes.
2.2 Componente incluse
- 1 x Hotă
- 1 x Ceiling Plate
- Mounting Material (screws and dowels)
- 1 x Grease Filter (pre-installed)
3. Configurare și instalare
This section provides general guidance for installing your extractor hood. For detailed, step-by-step instructions and safety warnings, please refer to the separate installation guide provided with your product.
3.1 Verificări înainte de instalare
- Verify that the ceiling structure can support the weight of the hood (approximately 17 kg / 37.2 lbs).
- Ensure a suitable electrical outlet (220-240 V~ | 50/60 Hz) is available near the installation point.
- Confirm the hood is intended for recirculation mode only; it cannot be converted to a drainage system.
3.2 Montarea hotei
The hood is designed for ceiling mounting. The ceiling plate provides the anchor point, from which the hood is suspended. The height is adjustable up to a maximum of 60 cm from the ceiling plate to the top of the hood body.
Figure 2: Product dimensions. The hood measures approximately 60 x 35 x 35 cm (WxHxD).
Figure 3: The Klarstein Kronleuchter island extractor hood installed above a freestanding cooktop in a modern kitchen.
3.3 Conexiune electrică
Connect the power cable from the hood to the electrical outlet. Ensure the connection is secure and complies with all electrical safety standards.
4. Funcționare
The Klarstein Kronleuchter extractor hood is operated via an intuitive LED touch panel located on the front of the unit.
Figure 4: The SenseControl LED touch panel for easy operation.
4.1 Panoul de control
The touch panel allows you to power the unit on/off, adjust fan speed, and control the lighting. Red indicator LEDs show the currently selected power level.
4.2 Selectarea vitezei ventilatorului
The hood offers three selectable circulation modes (fan speeds) to suit different cooking needs. Press the corresponding touch button to cycle through the speeds:
- Viteza 1: Low power for light cooking or maintaining air quality.
- Viteza 2: Putere medie pentru gătit în general.
- Viteza 3: High power for intense cooking or strong odors.
4.3 Controlul luminii
The integrated LED stove lighting (2 x 1.5 Watt) can be switched on or off independently of the fan operation. This provides clear illumination of your cooking surface.
Figure 5: Integrated LED lighting illuminates the cooking area.
5. Întreținere
Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood. Always disconnect the appliance from the power supply before performing any cleaning or maintenance tasks.
5.1 Curăţarea exteriorului
Wipe the exterior surfaces (safety glass and stainless steel) with a soft cloth dampened with mild detergent. Do not use abrasive cleaners or harsh chemicals, as these can damage the finish.
5.2 Curățarea filtrului de grăsime
The aluminum grease filter should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain effective grease removal. The filter is washable.
- Carefully remove the grease filter from the hood.
- Wash the filter by hand in hot soapy water or in a dishwasher on a low-temperature cycle.
- Allow the filter to dry completely before re-installing it.
Figure 6: The washable aluminum grease filter.
5.3 Replacing Activated Carbon Filters (Optional)
If you are using optional activated carbon filters for odor filtration, these cannot be washed and must be replaced periodically (typically every 3-6 months, depending on usage). Matching replacement activated carbon filters can be found under article number 10030983.
6. Depanare
Before contacting customer support, please consult the following table for common issues and their potential solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Hood not operating | Fără alimentare | Check if the appliance is plugged in and the circuit breaker is on. |
| Putere de aspirare redusă | Grease filter clogged | Curățați sau înlocuiți filtrul de grăsime. |
| Activated carbon filter saturated (if installed) | Înlocuiți filtrul de cărbune activ. | |
| Luminile nu funcționează | LEDs faulty | Contactați serviciul de asistență pentru clienți pentru înlocuire. |
| Zgomot excesiv | Componente slăbite sau instalare necorespunzătoare | Ensure all mounting screws are tightened. Check for any obstructions in the fan. |
7. Specificatii tehnice
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | CGCH2-90200-KronLW (Internal: f0fa2cda-d6b4-4d64-bb7d-b1b26d1e9ab0) |
| Marca | KLARSTEIN |
| Tip de montare | Island Mount (Tavan) |
| Tip de ventilație | Recirculare |
| Dimensiuni (LxAxD) | Approx. 60 x 35 x 35 cm (23.62" x 13.78" x 13.78") |
| Greutatea articolului | Aproximativ. 16.9 kg (37.2 lbs) |
| Material | Stainless Steel, Aluminum, Safety Glass |
| Culoare | Alb |
| Capacitatea fluxului de aer | 250 de metri cubi pe oră |
| Numărul de viteze | 3 |
| Nivel de zgomot | 58 de decibeli |
| Tipul comenzilor | Touch (LED Panel) |
| Iluminat | 2 x 1.5 Watt LED (Light Efficiency Class A) |
| Tip filtru | Plasă (filtru de grăsime din aluminiu) |
| Cerințe de putere | 220-240 V~ | 50/60 Hz |
| Wattage | 175 wați |
| Clasa de eficienta energetica | A |
Figure 7: Energy efficiency label for the Klarstein Kronleuchter hood.
8. Garanție și asistență pentru clienți
Your Klarstein Kronleuchter Island Extractor Hood comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
Pentru asistență tehnică, piese de schimb sau solicitări de garanție, vă rugăm să contactați serviciul de asistență pentru clienți Klarstein. Datele de contact pot fi găsite de obicei pe site-ul Klarstein. webpe site sau în documentația achiziției.
Please have your model number (CGCH2-90200-KronLW) and purchase date ready when contacting support.
