Manual de utilizare pentru routerul Wi-Fi Cudy LT300 4G LTE

1. Introducere

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Conținutul pachetului

Vă rugăm să verificați cu atenție conținutul pachetului. Dacă lipsește sau este deteriorat vreun articol, contactați distribuitorul.

• Cudy LT300 4G LTE Wi-Fi Router
• Adaptor de alimentare
• Cablu Ethernet
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Ghid de instalare rapidă

3. Produs terminatview

3.1. Componente hardware

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Figura 1: Faţă view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• LED de alimentare: Indică starea de alimentare.
• LED Wi-Fi: Indică starea Wi-Fi-ului.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LED-uri LAN/WAN: Indică activitatea portului Ethernet.

Figura 2: Spate view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Port de alimentare: Conectați adaptorul de alimentare inclus.
• Porturi LAN/WAN: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• Slot card SIM: Introduceți cartela SIM 4G LTE aici.
• Buton WPS/Resetare: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Conectori antene: Connect the detachable LTE antennas.

4. Configurare

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Introduceți cartela SIM

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Asigurați-vă că routerul este oprit.
2. Localizați slotul pentru cartela SIM pe panoul din spate.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Figura 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Pornire

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Configurare

5.1. Accesarea Web Interfață de management

To configure your router, you need to access its webinterfață de management bazată pe -.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Deschide a web browser (de exemplu, Chrome, Firefox, Edge).
3. Introduceți adresa IP implicită 192.168.10.1 în bara de adrese și apăsați Enter.
4. Enter the default login credentials. The default username is admin iar parola implicită este admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Setări Wi-Fi de bază

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• SSID (Numele rețelei): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Mod de securitate: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Operare

6.1. Conectarea dispozitivelor

• Wifi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. Indicatoare LED

Monitor the LED indicators on the front panel to understand the router's status:

• LED de alimentare: Solid Green (On), Off (Off).
• LED Wi-Fi: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LED-uri LAN/WAN: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Întreținere

7.1. Actualizare firmware

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official website-ul.

1. Descărcați cel mai recent firmware file for your LT300 model.
2. Accesați web interfata de management.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Încărcați firmware-ul descărcat file și urmați instrucțiunile de pe ecran. Nu opriți routerul în timpul procesului de actualizare.

7.2. Resetare din fabrică

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Eliberați butonul. Routerul se va reporni cu setările implicite din fabrică.

8. Depanare

• Fără conexiune internet:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Ensure APN settings are correct in the web interfata.
  • Reporniți routerul și dispozitivele conectate.
• Nu se poate accesa Web Interfata de management:
  • Asigurați-vă că dispozitivul este conectat la rețeaua Wi-Fi a routerului sau prin Ethernet.
  • Verificați adresa IP 192.168.10.1 este tastat corect.
  • Încearcă altceva web browser.
  • Perform a factory reset if you forgot the login password.
• Viteză Wi-Fi redusă:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • Reduceți numărul de dispozitive conectate sau activitățile care consumă multă lățime de bandă.
  • Consider changing the Wi-Fi channel in the web interfata.

9. Specificații

10. Informații de siguranță

• Do not expose the device to water or humidity.
• Nu încercați să dezasamblați sau să reparați singur dispozitivul.
• Utilizați numai adaptorul de alimentare furnizat.
• Țineți aparatul departe de sursele de căldură și lumina directă a soarelui.
• Asigurați o ventilație adecvată în jurul dispozitivului.

11. Garanție și asistență

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.