Truper 13499 PRES-1/3T Pressure Booster Pump User Manual

1. Introducere

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Informații de siguranță

Respectați întotdeauna următoarele măsuri de siguranță:

• Asigurați-vă că sursa de alimentare corespunde cu volumul pompeitage and frequency (127 V - 60 Hz).
• Deconectați alimentarea înainte de a efectua orice operațiune de întreținere sau instalare.
• Nu utilizați pompa cu lichide inflamabile.
• Protejați pompa de temperaturile de îngheț.
• Instalarea trebuie efectuată de către un profesionist calificat dacă nu sunteți sigur.
• Nu lăsați copiii și persoanele neautorizate să se apropie de pompa în funcțiune.

3. Componentele produsului

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

Figura 1: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

Componente cheie:

• Corpul pompei: Dark gray cast iron housing for the impeller and water channels.
• Carcasa motorului: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• Comutator de debit: Orange component with an arrow, detecting water flow to activate the pump.
• Cablu de alimentare: Electrical connection with an integrated on/off switch.

4. Configurare și instalare

Instalarea corectă este crucială pentru performanța și longevitatea pompei.

1. Locaţie:
   • Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures.
   • Asigurați-vă că pompa este așezată pe o suprafață stabilă și plană pentru a reduce la minimum vibrațiile.
   • Allow adequate space around the pump for ventilation and maintenance access.
2. Conexiuni la instalații sanitare:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. Conexiune electrică:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. Amorsarea pompei:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. Instrucțiuni de utilizare

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. Pornire inițială:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • Conectați pompa la o priză electrică adecvată.
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. Funcționare automată:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. Ciclu de funcționare:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6. Întreținere

Întreținerea regulată asigură o performanță optimă și prelungește durata de viață a pompei dumneavoastră.

• curatenie: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• Conexiuni: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• winterization: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• Inspecţie: Verificați cablul de alimentare pentru orice semne de deteriorare sau uzură. Înlocuiți dacă este necesar.

Warning: Always disconnect the pump from the power supply before performing any maintenance.

7. Depanare

This section addresses common issues you might encounter with your pressure booster pump.

8. Specificatii tehnice

9. Garanție și asistență

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper website-ul lor sau contactați centrele lor de service autorizate.