Manual de utilizare pentru scanerul de coduri de bare Datalogic Powerscan M8500 și suportul USB wireless

Introducere

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Datalogic Powerscan M8500 Barcode Scanner and its associated USB Wireless Cradle. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Informații de siguranță

• Do not expose the scanner or cradle to extreme temperatures, moisture, or direct sunlight.
• Evitați să scăpați dispozitivul sau să îl supuneți la impacturi puternice.
• Do not attempt to open or modify the scanner or cradle. Refer all servicing to qualified personnel.
• Use only Datalogic-approved accessories and power supplies.
• Țineți dispozitivul departe de câmpuri magnetice puternice.

Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• Datalogic Powerscan M8500 Barcode Scanner
• Datalogic USB Wireless Cradle
• Cablu USB

Înființat

1. Conectarea suportului

1. Connect one end of the provided USB cable to the USB port on the Datalogic Wireless Cradle.
2. Connect the other end of the USB cable to an available USB port on your computer (Desktop or Laptop).
3. The cradle's indicator light should illuminate, indicating it is powered on.

2. Pairing the Scanner

The scanner and cradle are typically pre-paired. If pairing is required:

• Ensure the cradle is connected and powered.
• Place the scanner into the cradle. The scanner should emit a beep or flash an indicator light to confirm connection.
• If the scanner does not pair automatically, refer to the Datalogic Powerscan M8500 Advanced Configuration Guide for specific pairing barcode sequences.

3. Încărcarea scanerului

To charge the scanner, simply place it into the connected cradle. The scanner's charging indicator light will show its charging status. A full charge typically takes several hours.

Operarea scanerului

Scanarea codurilor de bare

1. Ensure the scanner is charged and paired with its cradle.
2. Îndreptați fereastra scanerului spre codul de bare pe care doriți să îl scanați.
3. Press and hold the trigger button. A red aiming line or dot will appear.
4. Center the aiming line/dot over the barcode.
5. Once successfully scanned, the scanner will emit a beep and/or flash an indicator light, and the barcode data will be transmitted to your connected computer.

Indicator Lights and Sounds

The scanner and cradle use various indicator lights and audible signals to communicate status:

• Green Light/Single Beep: Scanare reușită.
• Red Light/Multiple Beeps: Scan error or battery low.
• Flashing Light (Scanner): Searching for cradle connection.
• Solid Light (Cradle): Powered on and connected.

Întreţinere

Curatenie

• Utilizați o cârpă moale, fără scame dampened with water or a mild cleaning solution to clean the exterior of the scanner and cradle.
• Do not use abrasive cleaners, solvents, or excessive moisture.
• Gently wipe the scanner's window to ensure optimal scanning performance.

Îngrijirea bateriei

• For optimal battery life, avoid fully discharging the scanner's battery frequently.
• Depozitați scanerul într-un loc răcoros și uscat atunci când nu îl utilizați pentru perioade lungi de timp.
• If the battery performance significantly degrades, contact Datalogic support for replacement options.

Depanare

Specificații

Garanție și suport

For warranty information, technical support, or service inquiries, please refer to the official Datalogic website or contact your authorized Datalogic reseller. Keep your purchase receipt as proof of purchase.