1. Introducere
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.
Informații de siguranță
- Întotdeauna opriți alimentarea cu energie de la întrerupătorul de circuit înainte de instalare sau service.
- Instalarea trebuie efectuată de către un electrician calificat sau de o persoană familiarizată cu construcția și funcționarea produsului, precum și cu pericolele implicate.
- Asigurați-vă că toate conexiunile electrice respectă codurile și ordonanțele locale.
- Nu instalați pe suprafețe care nu sunt solide din punct de vedere structural.
- Evitați să priviți direct în sursa de lumină LED atunci când aceasta este aprinsă.
2. Caracteristicile produsului
The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.
- High Brightness & Energy Efficiency: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
- Trei moduri de iluminare: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
- Adjustable Motion Sensor: 180-degree swiveling angle with a detection distance of up to 75 feet.
- Durabil și rezistent la intemperii: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
- Capete de lumină reglabile: Three independently adjustable light heads allow for broad and customized light coverage.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- Amico 3 Head LED Security Light Unit
- Suport de fixare
- Șuruburi de montare
- Nuci de sârmă
- EVA Pad (for waterproofing)
- Manual de instructiuni
4. Instrucțiuni de instalare
Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.
- Pregătiți suprafața de montare: Ensure the junction box is securely installed and accessible.
- Instalați suportul de montare: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
- Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
- Conexiuni prin cablu: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
- Green wire (from light) to Green wire (ground from junction box)
- Black wire (from light) to Black wire (hot from junction box)
- White wire (from light) to White wire (neutral from junction box)
Note: Improper wiring may cause the light to be slightly bright even when off.
- Montați corpul de iluminat: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
- Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
- Reglați capetele de iluminare și senzorul: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.
Ghid video de instalare
This video demonstrates the step-by-step installation process for the Amico Security Light, including mounting the bracket, wiring connections, and securing the light fixture.
5. Moduri de operare
The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.
Setări mod:
- Modul de detectare a mișcării: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
- Dusk-to-Dawn (D2D) Mode: The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
- Modul mereu pornit: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.
Ghid video pentru moduri de operare
This video illustrates the three operational modes of the Amico Security Light: Always-on, Dusk-to-Dawn, and Motion-Activated, showing how to set each mode.
6. Întreținere
Regular maintenance ensures the longevity and optimal performance of your security light.
- curatenie: Periodically clean the light heads and motion sensor lens with a soft, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Inspecţie: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
- Factori de mediu: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.
7. Depanare
If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | No power, incorrect wiring, sensor malfunction, ambient light too high. | Check circuit breaker. Verify wiring connections. Adjust sensor sensitivity. Ensure D2D mode is not active during daylight. |
| Lumina rămâne aprinsă continuu. | Sensor in 'TEST' mode, continuous motion, incorrect wiring. | Check sensor mode settings. Ensure no constant motion in detection zone. Re-check wiring. |
| Lumina se aprinde fără un motiv aparent. | High sensor sensitivity, environmental factors (wind, small animals). | Reduce sensor 'DISTANCE' setting. Clear obstructions from detection zone. |
| Lumina clipește sau pâlpâie. | Loose wiring, power fluctuations, faulty unit. | Check all wire connections. Consult an electrician for power issues. Contact customer support if problem persists. |
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Amico |
| Numele modelului | PD-1711 |
| Sursa de alimentare | Electric cu fir |
| Wattage | 40 wați |
| Luminozitate | 4000 lumeni |
| Temperatura de culoare | 5000 Kelvin (Day Light White) |
| Material | Aluminiu |
| Nivel de rezistență la apă | IP65 (rezistent la apă) |
| Unghiul senzorului de mișcare | 180 de grade |
| Distanța de detectare a mișcării | Până la 75 de picioare |
| Tip de instalare | Montare pe perete |
| Dimensiunile produsului | 13.8 cm L x 6 cm l x 6.7 cm Î |
| Greutatea articolului | 2.51 lire sterline |
9. Informații despre garanție
The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.
10. Asistență pentru clienți
For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico website-ul sau informațiile de contact furnizate pe ambalajul produsului.
