1. Produs terminatview
The Caso Design Fomini Crema Inox Electric Milk Frother is engineered to produce rich and creamy hot or cold milk froth, ideal for beverages such as Latte Macchiato, Cappuccino, or hot chocolate. Its design incorporates a double non-stick coating to prevent milk from burning and features an automatic shutoff for safe operation.
Figura 1.1: Față view of the Caso Design Fomini Crema Inox Electric Milk Frother, showcasing its sleek stainless steel design and control buttons.
Caracteristici cheie:
- Electric appliance for frothing and heating milk, suitable for home use.
- Optimized for preparing hot chocolate, latte macchiato, and cappuccino.
- Features a non-stick coating and auto shutoff to prevent milk from burning.
- Designed for small portions: heats up to 6.8 fl. oz. and froths up to 3.4 fl. oz.
- Sleek stainless steel construction with a heat-insulating comfort grip.
2. Instrucțiuni de siguranță
Please read all safety instructions carefully before using the appliance to ensure safe operation and prevent damage.
- Conectați întotdeauna aparatul la o priză cu împământare.
- Nu scufundați baza aparatului, cablul sau ștecherul în apă sau alte lichide.
- Asigurați-vă că aparatul este așezat pe o suprafață stabilă, plană și rezistentă la căldură.
- Nu utilizați aparatul dacă cablul sau ștecherul sunt deteriorate, dacă aparatul funcționează defectuos sau a fost deteriorat în vreun fel.
- Keep the appliance out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities.
- Do not fill above the maximum fill line indicated inside the frother.
- Lăsați aparatul să se răcească complet înainte de curățare.
- Use only the provided whisk attachments.
3. Componente incluse
Your Caso Design Fomini Crema Inox Electric Milk Frother package includes the following items:
- 1 x Milk Frother Unit
- 2 x Whisk Attachments (one for frothing, one for heating)
- 1 x Manual de utilizare
- 1 x card de garanție
Figura 3.1: Interior view of the frother, showing the whisk attachment securely placed at the bottom. The interior features a non-stick coating and fill level indicators.
4. Configurare
Înainte de prima utilizare, urmați acești pași:
- Despacheta: Îndepărtați cu grijă toate materialele de ambalare și verificați dacă există deteriorări.
- Curat: Wash the interior of the frother and the whisk attachments with warm soapy water. Rinse thoroughly and dry. Do not immerse the exterior of the frother or the base in water.
- Plasare: Place the frother unit on a clean, dry, and stable surface near a power outlet.
- Atașați telul: Select the appropriate whisk attachment (frothing whisk for foam, heating whisk for just heating) and place it securely onto the pin at the bottom of the frother's interior.
5. Funcționare
The Caso Design Fomini Crema Inox Electric Milk Frother features two main buttons for operation: one for hot frothing/heating and one for cold frothing.
Figura 5.1: Prim-plan view of the control panel, showing the hot (three wavy lines) and cold (snowflake) buttons for different functions.
5.1. Frothing Hot Milk (for Cappuccino, Latte Macchiato)
- Ensure the frothing whisk attachment is correctly installed.
- Pour cold milk into the frother. Do not exceed the "MAX FROTH" fill line (approx. 3.4 fl. oz.).
- Puneți capacul pe spumă.
- Press the top button (indicated by three wavy lines) once. The button will illuminate, and the frother will begin heating and frothing the milk.
- Spumătorul se va opri automat când procesul este complet.
- Scoateți cu grijă capacul și turnați laptele spumat.
5.2. Frothing Cold Milk (for Iced Coffee, Cold Foam)
- Ensure the frothing whisk attachment is correctly installed.
- Pour cold milk into the frother. Do not exceed the "MAX FROTH" fill line (approx. 3.4 fl. oz.).
- Puneți capacul pe spumă.
- Press the bottom button (indicated by a snowflake icon) once. The button will illuminate, and the frother will begin frothing the milk without heating.
- Spumătorul se va opri automat când procesul este complet.
- Carefully remove the lid and pour the cold frothed milk.
5.3. Heating Milk (without Frothing)
- Replace the frothing whisk with the heating whisk attachment (if provided, typically a flat ring).
- Pour cold milk into the frother. Do not exceed the "MAX HEAT" fill line (approx. 6.8 fl. oz.).
- Puneți capacul pe spumă.
- Press the top button (indicated by three wavy lines) once. The button will illuminate, and the frother will begin heating the milk.
- Spumătorul se va opri automat când laptele atinge temperatura optimă.
- Carefully remove the lid and pour the hot milk.
Figure 5.2: The frother in operation, with the hot frothing button illuminated in red, indicating the heating and frothing process is active.
6. Întreținere și curățare
Proper cleaning ensures the longevity and optimal performance of your milk frother. Always unplug the appliance before cleaning.
- Deconectați-vă și răciți-vă: Disconnect the frother from the power outlet and allow it to cool down completely after each use.
- Scoateți telul: Carefully remove the whisk attachment from the frother.
- Interior curat: Wash the interior of the frother and the whisk attachments with warm water and a mild dish soap. Use a soft sponge or cloth to avoid scratching the non-stick coating.
- Clătiți și uscați: Rinse the interior and whisk thoroughly with clean water. Dry all parts completely before storing.
- Exterior curat: Wipe the exterior of the frother with a damp pânză. Nu utilizați substanțe de curățare abrazive sau tampoane de curățat.
- Important: Do not immerse the main frother unit or its electrical base in water or any other liquid.
Figure 6.1: Detail of the heat-insulating comfort grip, which should be wiped clean with a damp pânză.
7. Depanare
If you encounter issues with your milk frother, please refer to the following table for common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Spumantul nu pornește. | Nu este conectat la priză; problemă cu priza; aparat defectuos. | Ensure the frother is securely plugged into a working outlet. Try a different outlet. If problem persists, contact customer support. |
| Laptele nu face spumă și nu se încălzește corect. | Incorrect whisk attachment; milk level too high/low; type of milk; whisk not properly installed. | Ensure the correct whisk is used for the desired function. Check milk levels are within MIN/MAX lines. Use cold, fresh milk (dairy or suitable plant-based). Re-install whisk securely. |
| Laptele se revarsă în timpul funcționării. | Overfilled frother. | Do not exceed the "MAX FROTH" or "MAX HEAT" fill lines. |
| Miros de ars sau lapte lipit de fund. | Residue from previous use; internal issue. | Clean the frother thoroughly after each use. If the problem persists after cleaning, discontinue use and contact customer support. |
8. Specificații
| Proprietate | Valoare |
|---|---|
| Marca | Case Design |
| Numele modelului | Fomini Crema Inox Electric Milk Frother |
| Numărul de model | 11663 |
| Culoare | Negru |
| Material | Oţel inoxidabil |
| Capacitate (Încălzire) | 6.8 Fluid Ounces (approx. 200 ml) |
| Capacitate (Spumare) | 3.4 Fluid Ounces (approx. 100 ml) |
| Sursa de alimentare | Electric |
| Dimensiunile produsului | 7.9 x 3.93 x 7.87 inchi (20.07 x 9.98 x 19.99 cm) |
| Greutatea articolului | 2.25 lire (1.02 kg) |
| GTIN | 04047849116635 |
| Instrucțiuni de îngrijire | Doar spălare manuală |
| Data primului disponibil | 13 decembrie 2018 |
9. Garanție și asistență
Your Caso Design Fomini Crema Inox Electric Milk Frother comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of the warranty.
For technical support, service, or warranty claims, please contact Caso Design customer service. Contact information can typically be found on the warranty card or the official Caso Design website-ul.
For more information, visit the official Caso Design Store: Magazinul Caso Design de pe Amazon
