Geko G02032 Low Profile Manual de instrucțiuni pentru cricul de garaj de 2.5 tone

1. Introducere

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Geko G02032 Low Profile 2.5 Ton Garage Jack. Please read and understand all instructions and safety warnings before using this product. Proper use and maintenance will ensure long-lasting performance and user safety.

2. Informații de siguranță

Always prioritize safety when operating hydraulic lifting equipment. Failure to follow these instructions may result in property damage, personal injury, or death.

• Citiți manualul: Understand all operating procedures and warnings before use.
• Capacitate nominală: Never exceed the jack's rated capacity of 2.5 tons.
• Use on Hard, Level Surface: Always operate the jack on a hard, level surface capable of supporting the load. Avoid soft or uneven ground.
• Folosește suporturi pentru cricuri: After lifting a vehicle, immediately support it with appropriate jack stands. The hydraulic jack is a lifting device only, not a vehicle support device.
• Center the Load: Asigurați-vă că sarcina este centrată pe șaua cricului. Sarcinile descentrate pot cauza instabilitate.
• Zona de lucru liberă: Keep the work area clean and well-lit. Keep bystanders away from the vehicle and jack during operation.
• Inspectați înainte de utilizare: Before each use, inspect the jack for any damage, leaks, or loose parts. Do not use if damaged.
• Proper Lowering: Coborâți încărcătura încet și într-un mod controlat.
• Echipament individual de protectie: Wear appropriate safety gear, such as safety glasses and gloves.
• Evitați modificările: Nu modificați cricul și nu îl utilizați în alte scopuri decât cele pentru care a fost conceput.

3. Componentele produsului

Familiarize yourself with the main components of your Geko G02032 garage jack.

Imaginea 3.1: The Geko G02032 Low Profile 2.5 Ton Garage Jack, showcasing its full assembly with the handle attached. This image provides an overall view of the product's design and key features, including the low-profile chassis, lifting arm, saddle, and wheels.

Imaginea 3.2: The Geko G02032 garage jack with its operating handle detached, illustrating the two main components. This view helps in understanding the assembly process and the compact nature of the jack when stored.

Imaginea 3.3: Un prim plan view of the jack's saddle and the product label. The label displays important information such as the brand 'Geko', model 'G02032', and safety warnings, while the saddle is the contact point for lifting the vehicle.

Imaginea 3.4: A detailed shot of the product label on the Geko G02032 jack, highlighting the maximum lift capacity of 2.5 tons and the lifting height range of 80mm to 360mm. This information is crucial for safe operation.

Imaginea 3.5: A close-up of the handle attachment point on the Geko G02032 jack. This shows the mechanism where the two-piece handle connects to the hydraulic pump, enabling lifting and lowering operations.

Imaginea 3.6: Un detaliat view of one of the swivel caster wheels on the Geko G02032 jack. These wheels allow for easy maneuverability and positioning of the jack under a vehicle.

Imaginea 3.7: A close-up of one of the fixed wheels located at the front of the Geko G02032 jack. These wheels provide stability and support during lifting operations.

Imaginea 3.8: Un detaliat view of the hydraulic release valve mechanism on the Geko G02032 jack. This component is crucial for controlling the lowering speed of the jack.

Imaginea 3.9: An alternative close-up perspective of the hydraulic mechanism and pivot points of the Geko G02032 jack, showing the robust construction and connection points for the lifting arm.

4. Configurare

4.1 Asamblarea inițială

1. Atașați mânerul: Insert the lower handle section into the handle socket on the jack. Align the holes and secure it with the provided pin or bolt. Then, attach the upper handle section to the lower section, ensuring it is firmly connected.

4.2 Bleeding the Hydraulic System

Air can become trapped in the hydraulic system during shipping or storage, affecting performance. Bleed the system before first use:

1. Turn the handle counter-clockwise to fully open the release valve.
2. Pump the handle vigorously 10-15 times to force any trapped air out of the system.
3. Rotiți mânerul în sensul acelor de ceasornic pentru a închide supapa de eliberare.
4. Test the jack by lifting it to its full height and then lowering it. Repeat if necessary until the jack operates smoothly.

5. Instrucțiuni de utilizare

5.1 Lifting a Vehicle

1. Pregătiți vehiculul: Park the vehicle on a hard, level surface. Engage the parking brake and block the wheels that will remain on the ground.
2. Poziționați cricul: Locate the manufacturer-recommended lifting points on the vehicle chassis. Position the jack so the saddle is directly under the lifting point.
3. Supapă de eliberare închisă: Turn the handle clockwise until the release valve is fully closed.
4. Ridicați vehiculul: Pump the handle up and down to raise the vehicle to the desired height.
5. Install Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points.
6. Lower onto Stands: Slowly turn the handle counter-clockwise to open the release valve and lower the vehicle onto the jack stands. Once the vehicle is securely resting on the stands, remove the hydraulic jack.

5.2 Lowering a Vehicle

1. Raise Slightly: If the vehicle is on jack stands, position the jack under the lifting point and pump the handle a few times to slightly raise the vehicle off the jack stands.
2. Remove Jack Stands: Carefully remove the jack stands from under the vehicle.
3. Vehicul inferior: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. Remove Jack: Once the vehicle is fully lowered and resting on its wheels, remove the jack.

6. Întreținere

Regular maintenance ensures the longevity and safe operation of your jack.

• Lubrifiere: Periodically lubricate all moving parts, pivot points, and wheels with light machine oil.
• Fluid hidraulic: Verificați nivelul lichidului hidraulic la fiecare trei luni. Pentru a verifica, coborâți complet cricul, scoateți dopul de umplere cu ulei și asigurați-vă că lichidul este la nivelul fundului orificiului de umplere. Folosiți numai ulei pentru cricul hidraulic de înaltă calitate. Nu utilizați lichid de frână sau ulei de motor.
• curatenie: Păstrați cricul curat și fără murdărie, grăsime și materiale corozive.
• Depozitare: Store the jack in a dry, clean area with the ram fully retracted to prevent corrosion and extend seal life.
• Inspecţie: Regularly inspect for damage, wear, or leaks. Any damaged parts should be replaced by qualified personnel.

7. Depanare

8. Specificații

9. Informații despre garanție

This Geko G02032 Low Profile 2.5 Ton Garage Jack is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or contact Geko customer support. Keep your proof of purchase for warranty claims.

10. Asistență pentru clienți

For technical assistance, parts replacement, or any questions regarding your Geko G02032 garage jack, please contact Geko customer support. Refer to the product packaging or the official Geko website pentru cele mai recente informații de contact.