1. Introducere
This manual provides instructions for the proper setup, operation, and maintenance of your TOOLCRAFT TO-4848702 Oscillating Sprinkler. Please read this manual thoroughly before first use to ensure optimal performance and longevity of the product.
Produs terminatview
The TOOLCRAFT TO-4848702 Oscillating Sprinkler is designed for efficient and even watering of lawns and gardens. It features adjustable settings to customize the watering area and is built with durable materials for reliable use.
Figure 1: The TOOLCRAFT TO-4848702 Oscillating Sprinkler, showcasing its black body, red adjustment knob, and 16 nozzles.
Caracteristici cheie
- Watered area up to a maximum of 336 m².
- Maximum range: 21 m.
- Maximum spray width: 16 m.
- Fine adjustment of watering width for precise coverage.
- Equipped with 16 rubber nozzles designed to prevent clogging.
2. Instrucțiuni de siguranță
Vă rugăm să respectați următoarele instrucțiuni de siguranță pentru a preveni vătămările corporale și deteriorarea produsului:
- Always disconnect the water supply before moving, adjusting, or performing maintenance on the sprinkler.
- Do not direct the water spray towards electrical outlets, wiring, or people.
- Keep the sprinkler out of reach of children and pets during operation.
- Ensure all connections are secure to prevent leaks and water wastage.
- Do not use the sprinkler with water temperatures exceeding 40°C (104°F).
3. Configurare și instalare
Follow these steps to set up your oscillating sprinkler:
- Despachetați aspersorul: Scoateți cu grijă aspersorul din ambalaj. Verificați dacă există deteriorări vizibile.
- Conectați-vă la sursa de apă: Attach a standard garden hose to the sprinkler's inlet connector. Ensure the connection is tight to prevent leaks.
- Poziționarea aspersorului: Place the sprinkler on a flat, stable surface in the area you wish to water. Ensure it is positioned centrally or strategically to cover the desired area effectively.
Figura 2: lateral view of the sprinkler, showing the hose connection point on the right. Ensure a secure connection to your garden hose.
4. Funcționare
Once the sprinkler is set up, you can begin watering and adjust its settings:
- Porniți apa: Slowly turn on the water supply from your faucet. Observe the sprinkler's operation.
- Adjust Spray Width and Range: The sprinkler features a red adjustment knob (visible in Figure 1) and side levers (if present, not explicitly shown but implied by "fine adjustment of watering width") to control the spray pattern.
- Rotate the red knob to adjust the oscillation angle, thereby controlling the length of the watered area (range).
- Use any side levers or sliders (if applicable to your model) to fine-tune the width of the spray pattern.
- Acoperire monitor: Periodically check the watered area to ensure even coverage and make any necessary adjustments.
- Opriți apa: When watering is complete, turn off the water supply at the faucet before disconnecting the hose.
5. Întreținere
Regular maintenance will help prolong the life of your sprinkler:
- Curățarea duzei: The 16 rubber nozzles are designed to resist clogging. However, if a nozzle becomes blocked, gently clear it using a small pin or the integrated cleaning tool (if provided, see Figure 3 for a potential cleaning tool).
Figura 3: Prim-plan view showing a red cleaning tool or end cap being inserted or removed from the sprinkler. This tool can be used to clear blocked nozzles.
- Depozitare pentru iarnă: Before the first frost, drain all water from the sprinkler and store it in a dry, frost-free location to prevent damage.
- Curatenie generala: Wipe the exterior of the sprinkler with a damp o lavetă pentru a îndepărta murdăria și resturile. Nu folosiți substanțe chimice dure.
6. Depanare
If you encounter issues with your sprinkler, refer to the following common problems and solutions:
- Model neuniform de pulverizare:
- Check for clogged nozzles and clear them as described in the Maintenance section.
- Ensure adequate water pressure from your supply. Low pressure can affect the spray pattern.
- Leaks at Hose Connection:
- Strângeți racordul furtunului.
- Check the rubber washer inside the hose connector for damage or proper seating. Replace if necessary.
- Sprinkler Not Oscillating:
- Ensure sufficient water pressure.
- Check for any obstructions in the oscillating mechanism.
7. Specificatii tehnice
| Caracteristică | Detaliu |
|---|---|
| Marca | MATERIA DE SCULE |
| Numărul de model | TO-4848702 |
| Dimensiuni produs (L x l x H) | 43 x 13 x 5 cm |
| Greutate | 390 de grame |
| Material | Alloy Steel, Aluminum, Polyoxymethylene |
| Culoare | Negru, Portocaliu |
| Tip de putere | Operare manuală |
| Max. Watered Area | 336 m² |
| Max. Gamă | 21 m |
| Max. Spray Width | 16 m |
| Numărul de duze | 16 (rubber) |
| Disponibilitatea pieselor de schimb în UE | 1 an |
8. Informații despre garanție
TOOLCRAFT products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact customer support for specific warranty terms and conditions applicable to your region. Keep your proof of purchase for warranty claims.
9. Asistență pentru clienți
For technical assistance, spare parts, or warranty inquiries, please contact TOOLCRAFT customer support. Contact details can typically be found on the product packaging, the official TOOLCRAFT website-ul web sau prin intermediul distribuitorului dumneavoastră.
When contacting support, please have your product model number (TO-4848702) and proof of purchase readily available.
