Produs terminatview
The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.
Figura 1: Faţă view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.
Caracteristici cheie
- Automatic Light Control: Turns lights on when motion is detected.
- Cronometru reglabil: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
- Acoperire largă: Provides up to 240° coverage and 69-ft of downward perimeter protection.
- Senzor de la amurg la zori: Automatically activates at dusk and deactivates at dawn.
- Compatibilitate largă: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
- Eficiență energetică: Features 2-level brightness technology.
- Anulare manuală: Allows the light to operate constantly for a selected period.
Configurare și instalare
Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.
Măsuri de siguranță
- Întotdeauna opriți alimentarea cu energie de la întrerupătorul de circuit înainte de instalare sau service.
- Ensure wiring connections are secure and comply with local electrical codes.
- Nu depășiți puterea maximătage rating of the connected lighting fixture.
Etape de instalare
- Opriți alimentarea: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage tester.
- Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
- Conectare cablare: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
- Montare senzor: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
- Restabiliți puterea: Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.
Instrucțiuni de operare
The GYQ27-W motion sensor offers several adjustable settings to customize its operation.
Reglarea setărilor
- Setarea orei: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
- Modul de testare: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
- Caracteristica de amurg la zori: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
- Ajustare sensibilitate: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.
Anulare manuală
To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.
Întreţinere
The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.
- curatenie: Ștergeți periodic lentila senzorului cu o lavetă moale șiamp cloth to remove dust, dirt, or cobwebs that may obstruct the sensor's viewNu folosiți produse de curățare abrazive.
- Inspecţie: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
- Factori de mediu: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.
Depanare
If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Light does not turn on when motion is detected. |
|
|
| Lumina rămâne aprinsă continuu. |
|
|
| Light turns on for no apparent reason (false triggers). |
|
|
Specificații
| Atribut | Valoare |
|---|---|
| Numărul de model | GYQ27-W |
| Marca | Utilitech |
| Culoare | Alb |
| Sursa de alimentare | Electric cu fir |
| Dimensiunile produsului | 5 x 3 x 2 inci |
| Greutatea articolului | 1.2 lire sterline |
| Raza maximă | 69 picioare |
| Unghi de acoperire | Până la 240° |
| Becuri compatibile | Dimmable LED, Dimmable CFL, Halogen, Incandescent |
Garanție și suport
Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.
You may also visit the official Utilitech website pentru cele mai recente informații și resurse de asistență.
