Yaheetech Horizontal Barbell Bumper Plate Rack Holder Olympic Bar Storage Rack YT-00073058 User Manual

1. Introducere și prezentarea produsuluiview

This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Horizontal Barbell Bumper Plate Rack Holder. This rack is designed to organize and store Olympic-sized barbell bumper plates and Olympic bars, featuring a mobile design with wheels and a handle for convenient relocation.

Imaginea 1: Per total view of the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.

Caracteristici cheie:

• Dimensiune: 37 x 13 x 11 inches (LxWxH).
• Max. Capacitate: 300 Lb (136 kg).
• Material: Powder-coated steel frame for resistance to sweat, moisture, and rust.
• Plate Slots: Includes 4 slots, each approximately 5.5 inches wide, to accommodate various bumper plate sizes.
• Mobilitate: Equipped with two 2.6-inch diameter rolling wheels and a sweat-resistant handle for easy movement.
• Bar Holders: Two vertical holders for Olympic bars.

2. Informații de siguranță

Please read and understand all safety instructions before assembling or using the product. Failure to follow these instructions may result in injury or damage to the product.

• Limită de greutate: Do not exceed the maximum weight capacity of 300 Lb (136 kg). Overloading can cause structural failure and injury.
• Asamblare: Ensure all bolts, nuts, and components are securely tightened before use. Periodically check for tightness.
• Suprafață stabilă: Always place the rack on a flat, stable, and level surface to prevent tipping.
• Copii și animale de companie: Keep children and pets away from the rack during assembly and use.
• Moving the Rack: When moving the rack, ensure plates and bars are securely seated. Use the handle and wheels for controlled movement. Avoid sudden stops or turns when heavily loaded.
• Inspecţie: Before each use, inspect the rack for any signs of damage, loose parts, or wear. Do not use if damaged.
• Încărcare corectă: Distribute weight evenly across the plate slots to maintain balance and stability.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe asamblarea. Dacă lipsesc sau sunt deteriorate piese, contactați serviciul de asistență pentru clienți.

• Cadru principal (1)
• Plate Dividers (4)
• Vertical Bar Holders (2)
• Ansamblu mâner (1)
• Roți (2)
• Hardware Pack (Bolts, Washers, Nuts, Wrenches)

4. Instructiuni de asamblare

Follow these steps carefully to assemble your barbell bumper plate rack.

1. Despachetați componente: Scoateți cu grijă toate piesele din ambalaj și așezați-le pe o suprafață curată și plană. Verificați cu lista conținutului ambalajului.
2. Atașați roți: Secure the two wheels to the designated points on one end of the main frame using the provided bolts and wrenches. Ensure they are firmly attached and can rotate freely.
3. Instalați mânerul: Attach the handle assembly to the opposite end of the main frame. Align the holes and secure with the appropriate bolts, washers, and nuts. Tighten securely.
4. Insert Plate Dividers: Slide the four plate dividers into their respective slots on the main frame. These should fit snugly to create the plate storage sections.
5. Mount Bar Holders: Attach the two vertical bar holders to the main frame, typically near the wheeled end. Secure them with the provided hardware.
6. Verificare finală: Once all components are assembled, double-check all bolts and nuts to ensure they are fully tightened. Gently rock the rack to confirm stability.

Imaginea 2: Prim-plan view of the rack's handle, designed for comfortable grip during movement.

Image 3: Detail of the vertical Olympic bar holders and one of the rolling wheels.

5. Instrucțiuni de utilizare

This section details how to properly load and move your Yaheetech Barbell Bumper Plate Rack.

• Loading Plates: Carefully place bumper plates into the designated slots. It is recommended to load heavier plates towards the center or bottom of the rack for better stability. Distribute weight as evenly as possible across the four slots.
• Storing Bars: Insert Olympic barbells vertically into the two bar holders. Ensure the bars are fully seated and stable.
• Moving the Rack: To move the rack, grasp the handle firmly. Tilt the rack slightly to engage the wheels, lifting the non-wheeled end off the ground. Roll the rack to your desired location. Avoid dragging the rack without using the wheels.
• Plasare: Always position the rack on a flat, stable surface away from high-traffic areas to prevent accidental tipping.

Image 4: The rack fully loaded with bumper plates and barbells, showcasincapacitatea sa de stocare.

Image 5: A closer look at bumper plates neatly organized within the rack's slots.

6. Întreținere

Regular maintenance ensures the longevity and safe operation of your plate rack.

• curatenie: Ștergeți cadrul de oțel cu reclamăamp o lavetă pentru a îndepărta praful și transpirația. Evitați substanțele de curățare abrazive care ar putea deteriora stratul de acoperire cu pulbere.
• Verificare hardware: Periodically (e.g., monthly) inspect all bolts, nuts, and connections. Tighten any loose hardware to maintain structural integrity.
• Inspecția roților: Check the wheels for any debris or damage that might impede smooth rolling. Clean as necessary.
• Prevenirea ruginii: The powder-coated steel is resistant to rust, but prolonged exposure to high humidity or moisture should be avoided. If scratches occur, touch up with rust-inhibiting paint.

7. Depanare

This section addresses common issues you might encounter with your plate rack.

8. Specificații

Detailed technical specifications for the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.

Image 6: Dimensional diagram of the plate rack, illustrating key measurements.

9. Garanție și asistență

Produsele Yaheetech sunt fabricate conform unor standarde de înaltă calitate. Pentru informații specifice despre garanție, vă rugăm să consultați documentația inclusă odată cu achiziția sau să vizitați site-ul oficial Yaheetech. website-ul.

If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Yaheetech customer support through the retailer where the product was purchased or via the contact information provided on the official Yaheetech website-ul.

• Suport online: Vizita www.yaheetech.shop (or your regional Yaheetech website) for FAQs and contact options.
• Serviciu clienți: Refer to your purchase receipt or product packaging for direct customer service contact details.