Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle Instruction Manual

1. Produs terminatview

The Sapphire Octa Series Modern Cabinet Handle (Model: SP-2044A-192-ORB) is designed to complement various home storage aesthetics. This handle features a straight, flat-faced design with subtle bevelling and layered handle feet, providing an easy-to-grab and functional accent for cabinetry.

Caracteristicile cheie includ:

• Oil-rubbed Bronze finish.
• Constructed from durable zinc material.
• Part of the Sapphire modern collection.
• Measures 7.56 inches (192mm) in length.
• Projects 0.5 inches from the cabinet surface.

Figure 1: Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle. This image displays the Sapphire Octa Series Modern Cabinet Handle, featuring a straight, flat-faced design with subtle bevelling and layered handle feet. The handle is shown in an oil-rubbed bronze finish.

2. Configurare și instalare

This cabinet handle is designed for easy installation. Basic tools are required (not included).

2.1 Componente incluse

• 1 x Sapphire Octa Series Cabinet Handle
• 2 x șuruburi de montare

2.2 Instrumente recomandate (nu sunt incluse)

• Banda de măsurat sau riglă
• Creion
• Drill with appropriate drill bit (typically 3/16" or 5mm for cabinet hardware)
• Screwdriver (Phillips head or flathead, depending on screw type)

2.3 Etapele de instalare

1. Măsurați și marcați: Determine the desired location for the handle on your cabinet door or drawer. Use a measuring tape to mark the two screw hole centers. The handle has a center-to-center measurement of 192mm (7.56 inches).
2. Găuriți găuri pilot: Carefully drill pilot holes through the marked points. Ensure the drill bit size is appropriate for the mounting screws to prevent splitting the wood.
3. Atașați mânerul: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door/drawer through the pilot holes and into the handle posts.
4. Asigura: Tighten the screws firmly with a screwdriver until the handle is securely attached. Avoid over-tightening, which can strip the screws or damage the cabinet material.

3. Instrucțiuni de utilizare

The Sapphire Octa Series Cabinet Handle functions as a pull for opening and closing cabinet doors and drawers. Simply grasp the handle and apply gentle force in the desired direction to operate the cabinet mechanism.

4. Întreținere

To maintain the appearance and functionality of your Sapphire cabinet handle, follow these guidelines:

• curatenie: Ștergeți mânerul în mod regulat cu o lavetă moale,amp Pentru petele persistente, folosiți o soluție delicată de săpun și uscați imediat cu o cârpă curată și moale.
• Evitați substanțele chimice dure: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the oil-rubbed bronze finish and zinc material.
• Verificați șuruburile: Periodically check the mounting screws for tightness. If the handle feels loose, gently tighten the screws to ensure secure attachment.

5. Depanare

• Mânerul se simte slăbit:

  Soluţie: Use a screwdriver to gently tighten the mounting screws from the inside of the cabinet door or drawer. Do not overtighten.

• Handle is difficult to install:

  Soluţie: Ensure that the pilot holes are drilled correctly and align with the handle's screw posts. Verify that the drill bit size is appropriate for the screws. If issues persist, consult a professional installer.

6. Specificații

7. Garanție și asistență

Specific warranty information for the Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the retailer where the product was purchased or the manufacturer, Imperial USA, directly.

Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.