1. Introducere
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Steelcase Series 1 Office Chair. Designed for ergonomic support and productivity, this chair features weight-activated controls, back and arm support, and is built for easy assembly.
- Design ergonomic: Provides essential ergonomics and quality with space efficiency and weight-activated controls.
- Personalizat: Offers optional 4-dimensional arm support and an adjustable headrest, along with additional back support.
- Durabil: Features flexible edges and adaptive bolstering in the forearm for a pressure-free sit.
- Asamblare ușoară: Can be assembled in under 2 minutes without tools.

Produs terminatview Video
Video 1: Un overview of the Steelcase Series 1 Work Office Chair in Nickel, demonstrating its design and features.
2. Configurare și asamblare
The Steelcase Series 1 chair is designed for quick and tool-free assembly. Follow these steps to set up your chair.
Video cu instrucțiuni de asamblare
Video 2: Step-by-step guide for assembling the Steelcase Series 1 Chair. This video demonstrates how to connect the base, cylinder, seat, and backrest components.
Video 3: An alternative assembly guide for the Steelcase Series 1 Chair, providing visual instructions for quick setup.
Video 3: An alternative assembly guide for the Steelcase Series 1 Chair, providing visual instructions for quick setup.
Notă importantă privind asamblarea:
Always follow the assembly instructions carefully to ensure the chair is assembled correctly and safely. Failure to do so may result in instability or injury.
3. Utilizarea scaunului (Reglări)
Your Steelcase Series 1 chair offers various adjustments to customize your seating experience for optimal comfort and support.
Adjustment Guide Video
Video 4: This video demonstrates how to adjust various features of the Steelcase Series 1 chair, including seat height, seat depth, armrests, and lumbar support.
Ajustări cheie:
- Înălțimea scaunului: Use the lever located under the right side of the seat to raise or lower the chair. Ensure your feet are flat on the floor and thighs parallel to the ground.
- Adâncimea scaunului: Adjust the seat forward or backward to ensure 2-3 inches of space between the seat edge and the back of your knees.
- Cotiere: The 4-dimensional armrests can be adjusted for height, width, pivot, and depth. Press the button on the armrest to adjust height. Grasp the arm caps to slide them for width, pivot, and depth.
- Recline and Tension: The chair features weight-activated controls. Use the comfort dial to adjust back tension and recline. There are 3 reclining positions.
- Suport lombar: The adjustable lumbar support can be moved up or down to fit the small of your back, providing additional support.


4. Întreținere
Proper care ensures the longevity and performance of your Steelcase Series 1 Office Chair.
- Instrucțiuni de îngrijire a produsului: Spot Wash. For specific cleaning instructions, refer to the fabric care guide provided with your chair or visit the Steelcase website-ul.
- Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că sunt fixate.
- Clean casters periodically to prevent debris buildup that could hinder movement.
5. Depanare
If you encounter any issues with your Steelcase Series 1 chair, consider the following common solutions:
- Scaunul nu se ajustează pe înălțime: Ensure the height adjustment lever is fully engaged and that you are lifting your weight off the seat when raising, or applying weight when lowering.
- Cotierele sunt slăbite: Check for any visible screws or locking mechanisms on the armrests and tighten them if necessary.
- Chair squeaks or creaks: Apply a small amount of silicone-based lubricant to moving parts, especially around the base and tilt mechanism.
- Roțile nu se mișcă ușor: Clean any hair or debris from the casters. If issues persist, consider replacing the casters.
Pentru probleme persistente, vă rugăm să contactați serviciul de asistență pentru clienți Steelcase.
6. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Steelcase |
| Numele modelului | Scaun de lucru seria 1 |
| Numărul de model al articolului | 435A00-5T20-5S24-6205-4ARM-LUM-CC |
| Culoare | Nichel |
| Dimensiunile produsului | 31" D x 28.5" L x 16" H |
| Greutatea articolului | 29 lire sterline |
| Greutate maximă recomandată | 300 lire sterline |
| Material | Spumă (material de umplutură) |
| Stil din spate | Deschide Spatele |
| Stilul piciorului | Wheels (Carpet Casters) |
| Număr de poziții înclinate | 3 |
| Asamblare necesară | Da |
7. Garanție și asistență
For detailed warranty information, please refer to the documentation included with your product or visit the official Steelcase website. Steelcase products are thoroughly tested to meet strict commercial quality standards.
For customer support, product registration, or to explore other Steelcase products, please visit the Steelcase Brand Store.





