Manual de utilizare pentru telecomanda DIRECTV RC73 IR/RF

Produs terminatview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

Înființat

1. Instalarea bateriei

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

1. Localizați capacul compartimentului bateriei de pe spatele telecomenzii.
2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
3. Introduceți două baterii AA, asigurându-vă că bornele pozitive (+) și negative (-) se aliniază corect cu indicatoarele din interiorul compartimentului.
4. Puneți la loc capacul compartimentului bateriei, glisându-l înapoi în poziție până când se aude un clic sigur.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

1. Point the remote at your DIRECTV receiver.
2. Apăsați și mențineți apăsat simultan MUTE butonul și SELECTA button on the remote for approximately 5 seconds.
3. Release the buttons when the green light on the remote blinks twice.
4. Using the number pad on the remote, enter the code 961.
5. Apăsați tasta CANAL SUS butonul o dată.
6. Apăsați tasta ENTER button (located below the number pad).
7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
8. Apăsați tasta SELECTA (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

1. Apăsați tasta MENIU button on your DIRECTV remote.
2. Navigate down using the CANAL JOS button to find and select Setări.
3. Once in Settings, use the directional arrows to navigate to the right until you find and select Telecomanda.
4. From the Remote Control Setup menu, select Pereche/Programă telecomandă.
5. Alege Program Audio Device.
6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
7. Follow the on-screen prompts to test the code. This usually involves pressing the PUTERE button on the remote to see if your TV turns off.
8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

Instrucțiuni de operare

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

Întreţinere

Înlocuirea bateriei

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

1. Remove the battery compartment cover as described in the Setup section.
2. Scoateți bateriile vechi.
3. Insert two new AA batteries, observing the correct polarity (+/-).
4. Înlocuiți capacul compartimentului bateriei.

Curatenie

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

Depanare

Specificații

• Marca: DIRECTV
• Model: RC73
• Număr de model articol: 4336303112
• Tehnologie de conectivitate: Infrared (IR), Radio Frequency (RF)
• Dispozitive compatibile: DIRECTV Genie (HR44 or above), Genie Lite (H44 or above), Genie Mini (C41 or above), 4K Genie Mini (C61K or above), Wireless Genie Mini (C41W or above) in RF mode. All DIRECTV receivers and DIRECTV Ready TVs in IR mode.
• Sursa de alimentare: 2 baterii AA (incluse)
• Greutatea articolului: 1 uncie
• Dimensiuni pachet: 9.61 x 3.7 x 2.91 inci
• Culoare: Negru
• Caracteristica speciala: Original DirecTV Equipment

Garanție și suport

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV website. Termenii și condițiile de garanție pot varia.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

Resurse online:

• Official DIRECTV Website: www.directv.com
• Support Pages: Look for a "Support" or "Help" section on the DIRECTV website for FAQs and additional guides.