Project Source 11-Inch Flush Mount Light User Manual

Introducere

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Informații de siguranță

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Toate conexiunile electrice trebuie să fie în conformitate cu codurile locale, ordonanțele sau Codul Electric Național (NEC).
• Consultați un electrician calificat dacă nu sunteți sigur de procesul de instalare.
• Nu instalați acest dispozitiv de iluminat în locuri umede sau uscate.amp locații.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Nu depășiți puterea maximătage specificat pentru acest dispozitiv de fixare.
• Manipulați componentele din sticlă cu grijă pentru a preveni spargerea acestora.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Manual de instrucțiuni (acest document)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Configurare și instalare

Instrumente necesare (nu sunt incluse):

• Șurubelniță cu cap Phillips
• Dispozitive de dezimbrare
• Bandă izolatoare (opțional)
• Ochelari de siguranță

Pașii de instalare:

1. Opriți alimentarea: Localizați întrerupătorul sau cutia de siguranțe care controlează alimentarea cu energie a corpului de iluminat. Opriți complet alimentarea cu energie înainte de a continua.
2. Îndepărtați vechiul dispozitiv de fixare (dacă este cazul): Scoateți cu grijă orice corp de iluminat existent, observând conexiunile cablurilor.
3. Pregătirea cablajului: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Conectează firele:
   • Conectați negru sârmă de la dispozitivul de fixare la negru (hot) wire from the ceiling box using a wire nut.
   • Conectați alb sârmă de la dispozitivul de fixare la alb (neutral) wire from the ceiling box using a wire nut.
   • Conectați green or bare copper fir de împământare de la dispozitivul de iluminat la green or bare copper ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Dispozitiv de fixare: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Restabiliți puterea: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Instrucțiuni de operare

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Întreţinere

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• curatenie: Înainte de curățare, asigurați-vă că alimentarea cu energie a dispozitivului de iluminat este oprită de la întrerupătorul de circuit. Folosiți o lavetă moale, uscată sau ușor umedă.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Îngrijirea sticlei: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Fără înlocuire a becului: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Depanare

If your light fixture is not functioning as expected, consult the following common issues and solutions:

If the problem persists after trying these solutions, contact a qualified electrician or customer support.

Specificații

Garanție și suport

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.