1. Introducere
The OSRAM eldoLED Optotronic LED Driver OT Programmer is a specialized tool designed for programming single, non-DALI OPTOTRONIC LED drivers. This device facilitates quick and efficient configuration of LED drivers using the Tuner4TRONIC software via a standard USB interface. It allows for programming without the need to apply mains voltage to the driver, streamlining the setup process for professional lighting installations.
This manual provides essential information for the safe and effective use of your OT Programmer, including setup, operation, maintenance, and technical specifications.
Image 1.1: eldoLED Optotronic OT Programmer with a connected programming cable, showing the USB and programming ports.
2. Informații de siguranță
Vă rugăm să citiți și să înțelegeți toate instrucțiunile de siguranță înainte de a utiliza dispozitivul. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau vătămări corporale grave.
- Numai pentru profesioniști calificați: This device is intended to be used by qualified professionals only.
- Citiți instrucțiunile: Always read the complete installation and operating instructions before use.
- No AC Connection: Do not connect the OT Programmer to an AC (mains) line. The unit is powered exclusively through its USB port.
- Temperatura de functionare: Ensure the ambient temperature range is between 0°C and +50°C (32°F to 122°F) during operation.
- Compatibilitate: This programmer is suitable only for non-DALI OPTOTRONIC devices that utilize the Prog +/- interface.
The device complies with FCC 47 CFR part 15, Class A, IEC 60950-1, and IEC 55022 standards.
3. Configurare
Follow these steps to set up your OT Programmer for use:
3.1. Instalare software
The OT Programmer requires the Tuner4TRONIC software for operation. This software is essential for configuring your LED drivers.
- Descărcați software: Obtain the latest version of the Tuner4TRONIC software from the official eldoLED website. Vizita www.eldoLED.com/contact for download links and support.
- Instalați software-ul: Follow the on-screen instructions to install Tuner4TRONIC on your computer.
3.2. Connecting the Programmer
The OT Programmer is powered and communicates via a standard USB connection.
- Conectare la computer: Use a standard USB cable to connect the OT Programmer to an available USB 2.0 port on your computer. The unit will power on automatically.
- Connect to LED Driver: Connect the programming cable from the OT Programmer's "Program (+)/(-)" interface to the corresponding Prog +/- interface on the non-DALI OPTOTRONIC LED driver you wish to program.
Imaginea 3.1: Sus view of the eldoLED Optotronic OT Programmer, highlighting the USB 2.0 port and the Program (+)/(-) interface.
4. Instrucțiuni de utilizare
Once the hardware is connected and the Tuner4TRONIC software is installed, you can proceed with programming your LED drivers.
- Launch Tuner4TRONIC: Open the Tuner4TRONIC software on your computer.
- Recunoaștere dispozitiv: The software should automatically detect the connected OT Programmer and the LED driver. If not, check your connections and ensure the software is up to date.
- Configure Driver: Use the Tuner4TRONIC interface to select the desired parameters and settings for your OPTOTRONIC LED driver.
- Program Driver: Initiate the programming process through the software. The OT Programmer will transfer the settings to the LED driver. This process is typically very fast.
- Verificați setările: After programming, it is recommended to verify the settings within the Tuner4TRONIC software to ensure successful configuration.
5. Întreținere
The OT Programmer is designed for durability and requires minimal maintenance.
- curatenie: Păstrați dispozitivul curat și fără praf. Folosiți o cârpă moale și uscată pentru curățare. Nu utilizați agenți de curățare lichizi sau solvenți.
- Depozitare: Store the programmer in a dry, cool environment when not in use.
- Îngrijirea cablului: Handle USB and programming cables with care to prevent damage to connectors and wires.
6. Depanare
If you encounter issues with your OT Programmer, refer to the following common troubleshooting steps:
- Programmer Not Recognized:
- Ensure the USB cable is securely connected to both the programmer and the computer.
- Încercați un alt port USB pe computer.
- Verify that the Tuner4TRONIC software is correctly installed and up to date.
- Reporniți computerul.
- LED Driver Not Detected:
- Confirm that the programming cable is correctly connected to the Prog +/- interface of the LED driver.
- Ensure the LED driver is a compatible non-DALI OPTOTRONIC device with the Prog +/- interface.
- Check for any physical damage to the programming cable or the driver's interface.
- Erori de programare:
- Refer to the Tuner4TRONIC software documentation for specific error codes and solutions.
- Ensure the LED driver is in a ready state for programming.
For persistent issues, contact customer support as detailed in Section 8.
7. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | 4052899209640 |
| Numărul piesei | 4052899209640 |
| Vol. Nominaltage | 5.00 V (alimentat prin USB) |
| Frecvența rețelei | 0 Hz (Not connected to AC) |
| Dimensiuni produs (L x l x H) | 4.7 x 3 x 1.1 inchi (119.4 x 76.2 x 27.9 mm) |
| Greutatea produsului | 4 uncii (113.4 grame) |
| Interval de temperatură ambientală | 0°C până la +50°C (32°F până la 122°F) |
| Material | Cupru (componente interne) |
| Interfață | USB 2.0, Prog +/- |
| Compatibilitate | Non-DALI OPTOTRONIC devices with Prog +/- interface |
| Software necesar | Tuner4TRONIC |
8. Garanție și asistență
For warranty information and technical support, please refer to the official OSRAM or eldoLED website. You can typically find detailed warranty terms and contact information for support services at www.eldoLED.com/contact or through your local OSRAM/eldoLED distributor.
Când contactați serviciul de asistență, vă rugăm să aveți la îndemână numărul modelului produsului (4052899209640) și orice informații relevante despre achiziție.
