Introducere
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.
The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.
Instrucțiuni de siguranță
Always observe the following safety precautions to prevent personal injury or damage to the compressor:
- Asigurați-vă că compresorul este așezat pe o suprafață stabilă și plană.
- Nu utilizați compresorul în zone umede sau damp conditii.
- Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
- Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
- Nu îndreptați niciodată aerul comprimat spre oameni sau animale.
- Țineți copiii și persoanele neautorizate departe de zona de operare.
- Regularly check all connections and hoses for leaks or damage.
Componente terminateview
- Rezervor de aer: Stores compressed air (24 litres capacity).
- Ansamblu motor și pompă: Generează aer comprimat.
- Manometre: Afișează presiunea din rezervor și presiunea de ieșire reglată.
- Regulator de presiune: Reglează presiunea aerului de ieșire.
- Cuplaj rapid: For attaching air tools and hoses.
- Valva de scurgere: Situat în partea de jos a rezervorului pentru evacuarea condensului.
- Roți și mâner: Pentru transportul ușor al unității.
Înființat
- Despachetarea și inspecția: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
- Asamblare (dacă este necesar): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
- Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
- Plasare: Poziționați compresorul pe o suprafață fermă și plană, într-o zonă bine ventilată. Asigurați-vă că există suficient spațiu în jurul unității pentru circulația aerului.
- Conexiune electrică: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.
Instrucțiuni de operare
- Pornirea compresorului:
- Asigurați-vă că robinetul de golire de la fundul rezervorului este închis.
- Plug the compressor into the power outlet.
- Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
- Reglarea presiunii de ieșire:
- Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
- Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
- Conectarea sculelor pneumatice:
- Attach your air hose to the quick connect coupler.
- Connect your air tool to the other end of the hose.
- Închidere:
- Flip the ON/OFF switch to the 'OFF' position.
- Deconectați compresorul de la priza de alimentare.
- Depressurize any air remaining in the hose and tool.
- Scurgerea condensului: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.
Întreţinere
Regular maintenance ensures optimal performance and longevity of your compressor.
- Zilnic:
- Evacuați condensul din rezervorul de aer.
- Check oil level (if applicable, for oil-lubricated models).
- Weekly/Every 10 Hours of Use:
- Inspect air filter for dirt and debris. Clean or replace if necessary.
- Check for any unusual noises or vibrations.
- Monthly/Every 50 Hours of Use:
- Inspect all fasteners for tightness.
- Check safety valve operation (briefly pull the ring to ensure it releases air).
- Annually/Every 200 Hours of Use:
- Change compressor oil (if applicable).
- Inspect pressure switch and gauges for proper function.
- Depozitare: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Compresorul nu pornește. | Fără curent, întrerupător declanșat, comutator defect. | Check power connection, reset breaker, contact service. |
| Compresorul functioneaza continuu. | Air leak, faulty pressure switch, clogged air filter. | Check for leaks, inspect pressure switch, clean/replace filter. |
| Presiune scăzută a aerului. | Regulator set too low, air leak, worn pump components. | Adjust regulator, check for leaks, contact service. |
| Zgomot sau vibrații excesive. | Loose components, worn bearings, insufficient oil. | Tighten fasteners, check oil level, contact service. |
| Pierdere de ulei. | Loose fittings, damaged seals, overfilled oil. | Check connections, replace seals, adjust oil level. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.
Specificații
| Marca | ABAC |
| Numele modelului | Pole Position 24 Litre |
| Capacitatea rezervorului | 24 litri |
| Putere | 2 CP (1.5 kW) |
| Admisia de aer | 220 Litres/minute |
| Presiune maximă | 10 bar |
| Voltage | 230 volți |
| Nivel de sunet | 95 dB |
| Dimensiuni (L x l x H) | 60 x 60 x 26 cm |
| Greutate | 3 kg |
Garanție și suport
ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC website-ul.
For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.
Puteți găsi mai multe informații și date de contact pe ABAC Store on Amazon.
