1. Produs terminatview
The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.
Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.
2. Ce se află în cutie
La deschiderea ambalajului, vă rugăm să verificați dacă sunt incluse toate componentele următoare:
- 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
- 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
- 2 x telecomandă
- 2 x Senzori de ușă/fereastră
- 4 x Assist Installation Screws
- 4 x Wall-in Fixed Rubber Blocks
- 1 x 1M USB Power Cable (for 5V power supply)
Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.
3. Ghid de instalare
3.1 Pornirea inițială și conectarea la rețea
- Conectare alimentare: Use the provided USB power cable to connect the alarm host to a 5V power source.
- Instalare cartelă SIM (opțional): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
- Configurare Wi-Fi:
- Download the "Easy security" app from your smartphone's app store.
- Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
- Follow the in-app instructions to pair the alarm host with your Wi-Fi network.
Figura 3.1: lateral view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.
3.2 Instalarea și conectarea senzorilor
The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.
- Detector de mișcare PIR:
- Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
- Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
- Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
- Senzori ușă/fereastră:
- Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
- Pair the sensors with the alarm host using the same method as the PIR detector.
- Telecomenzi:
- The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.
Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.
4. Instrucțiuni de utilizare
4.1 Utilizarea panoului de control
The main control panel features a touchscreen display and a numeric keypad for direct interaction.
- Armare: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
- Dezarmare: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
- Funcția SOS: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
- Setări: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.
Figura 4.1: Față view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.
4.2 Mobile App Control ("Easy security")
The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.
- Armare/Dezarmare de la distanță: Activate or deactivate the system from anywhere with an internet connection.
- Notificări în timp real: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
- Managementul senzorilor: Add, remove, or configure individual sensors and their respective defense zones.
- Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
- Starea sistemului: View starea actuală a sistemului de alarmă și a senzorilor conectați.
5. Întreținere
- Înlocuire baterie: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
- curatenie: Ștergeți ușor panoul de control și senzorii cu o cârpă moale și uscată. Evitați utilizarea de produse de curățare abrazive sau solvenți.
- Actualizări firmware: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
- Stabilitatea rețelei: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Sistemul nu se conectează la Wi-Fi | Incorrect Wi-Fi password; Host and phone not on same network during setup; Weak Wi-Fi signal. | Verify password; Ensure both devices are on the same 2.4GHz Wi-Fi network; Move host closer to router. |
| Senzorii nu declanșează alarma | Sensor not paired; Low sensor battery; Sensor placed incorrectly. | Re-pair sensor; Replace sensor battery; Adjust sensor position according to installation guidelines. |
| Fără notificări push | App notification settings disabled; Network issues; App not running in background. | Enable notifications in app and phone settings; Check internet connection; Ensure app is allowed to run in background. |
| SOS function not calling contacts | No SIM card; Invalid SIM card; Emergency contacts not programmed correctly. | Install active SIM card; Verify SIM card balance/plan; Program emergency contacts via app or control panel. |
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | DIGOO |
| Model | DIGOOWolifui253 (DG-HOSA) |
| Tehnologia de conectivitate | Wireless (Wi-Fi, GSM, 2G, 3G) |
| Sursa de alimentare | Battery Powered (5V USB Power Cable included) |
| Metoda de control | App ("Easy security"), Control Panel, Remote Control |
| Dispozitive compatibile | Smartphone |
| Tip de alertă | Audio Only, Motion Only (configurable) |
| Senzori maximi suportați | 99 |
| Dimensiuni produs (L x l x H) | 15 x 7 x 21 centimetri |
| Greutatea articolului | 408 g (0.9 livre) |
| Bateriile necesare | 1 Lithium Polymer battery (for host, typically internal/rechargeable) |
| Tip de instalare | Screw-In (for mounting) |
8. Garanție și asistență
For warranty information and technical support, please refer to the official DIGOO website-ul lor web sau contactați serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru reclamațiile în garanție.
Resurse online:
- Official DIGOO Website: www.digoo.cc (Notă: Acesta este un substituent URL, please refer to actual product documentation for correct support links.)
- "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.
