Manual de utilizare

1. Introducere

Mulțumesc pentru achizițieasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

Figura 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Informații importante privind siguranța

AVERTISMENT: Risc de electrocutare. Deconectați alimentarea de la cutia de siguranțe sau de la întrerupătorul de circuit înainte de instalare sau service.

• Citiți cu atenție toate instrucțiunile înainte de a începe instalarea.
• Toate conexiunile electrice trebuie să fie în conformitate cu codurile locale, ordonanțele sau Codul Electric Național (NEC). Consultați un electrician calificat dacă nu sunteți familiarizat cu conexiunile corecte ale cablajului electric.
• Use only UL-listed wire connectors for the electrical connections.
• Nu depășiți puterea maximătage specified for this fixture (14 Watts per bulb).
• Purtați ochelari de protecție și echipament de protecție adecvat în timpul instalării.
• Asigurați-vă că dispozitivul este împământat corespunzător.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Elemente de montare (șuruburi, piulițe de sârmă, suport de montare)
• Note: Light bulbs are NOT included.

4. Specificații

5. Configurare și instalare

Instrumente necesare: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Pași înainte de instalare:

1. Opriți alimentarea: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Pregătiți zona: Clear the work area and ensure you have stable footing if using a ladder.
3. Despacheta: Carefully remove the fixture and all components from the packaging.

Pașii de instalare:

1. Atașați suportul de montare: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Conectați firele electrice:
   • Conectați negru (hot) wire from the ceiling to the negru wire of the fixture using a wire nut.
   • Conectați alb (neutral) wire from the ceiling to the alb wire of the fixture using a wire nut.
   • Conectați sol wire (bare copper or green) from the ceiling to the sol wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Fixarea dispozitivului de fixare pe suportul de montare: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Instalați becuri: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. Atașați abajurul de sticlă: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Restabiliți puterea: După ce instalarea este finalizată și toate conexiunile sunt fixate, restabiliți alimentarea cu energie electrică la întrerupătorul de circuit.

6. Instrucțiuni de utilizare

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Îngrijire și întreținere

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Curățarea dispozitivului de fixare: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Înlocuire bec: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage și tipul de bază.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Depanare

Dacă întâmpinați probleme cu corpul de iluminat, consultați următoarele probleme și soluții frecvente:

• Lumina nu se aprinde:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Pâlpâituri de lumină:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. Garanție și asistență pentru clienți

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website-ul sau informațiile de contact furnizate în ambalajul produsului. Vă rugăm să aveți la îndemână numărul modelului (40804) și detaliile de achiziție atunci când contactați serviciul de asistență.