1. Introducere
This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.
2. Conținutul pachetului
Vă rugăm să verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:
- 2 x SmallRig Cold Shoe Mount Adapters
- 2 x 1/4"-20 Screws
- 4 x șuruburi M2.5
- 2 x Hex Spanners
Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.
3. Configurare și instalare
The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.
3.1 Identifying Mounting Points
The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.
Imaginea 3.1: Spate view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.
3.2 Attachment Procedure
- Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
- Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
- Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
- Nota: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.
Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.
4. Instrucțiuni de utilizare
Once the cold shoe mount adapter is securely installed, you can attach various accessories.
4.1 Atașarea accesoriilor
- Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
- Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
- The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.
Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.
Imaginea 4.2: Example of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.
4.2 Compatibilitate
This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Exampfișierele includ:
- Microfoane
- Lumini LED
- External Flashes
- Small monitors (with appropriate cold shoe adapter)
- Magic Arms (with cold shoe base)
- Cold Shoe Handles
Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.
5. Întreținere
To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:
- Keep the mount clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the mount to extreme temperatures or corrosive substances.
- Periodically check the tightness of the mounting screws to ensure a secure connection.
6. Depanare
6.1 Accessory Not Fitting Securely
- Ensure the accessory has a standard cold shoe base.
- Verify that the accessory is slid fully into the mount, past the anti-off bevels.
- Some accessories may have a locking mechanism that needs to be tightened after insertion.
6.2 Mount Not Attaching to Camera Accessory
- Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
- Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
- Tighten the screw firmly with the hex spanner.
6.3 Compatibility Limitations
This Cold Shoe Mount is NU suitable for DJI gimbals and NU for ZHIYUN gimbals.
7. Specificații
| Model | 2060 |
| Material | Aliaj de aluminiu |
| Dimensiuni (L x l x H) | 25 mm x 25 mm x 9 mm (0.98" x 0.98" x 0.35") |
| Item Weight (per piece) | 0.317 uncii (aprox. 9 g) |
| Tip de montare | 1/4"-20 Thread, M2.5 Thread |
| Compatibilitate | Standard cold shoe accessories, camera cages with 1/4"-20 or M2.5 threads |
Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.
8. Garanție și asistență
For warranty information or technical support, please refer to the official SmallRig website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.
SmallRig oficial Website: www.smallrig.com
