Everbilt 1/6 HP Plastic Utility Pump

Introducere

The Everbilt 1/6 HP Submersible Utility Pump (Model SUP54-HD) is designed for efficient water removal in various settings. This pump is ideal for use in most areas where unwanted water gathers, such as window wells, hot tubs, spas, and flooded basements. It can be totally submersed in water and is capable of pumping down to 3/8 inches from flat surfaces. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Figura 1: Față view of the Everbilt 1/6 HP Plastic Utility Pump.

Informații importante privind siguranța

WARNING: To reduce the risk of electrical shock or injury, fully read and follow the instruction manual before attempting to install or operate this pump.

• This pump should be installed in accordance with the National Electrical Code (NEC) and local codes and ordinances.
• This pump should be connected to a 115V, GFCI outlet protected with a 5 AMP siguranța sau întrerupătorul de circuit.
• The use of an extension cord to power this pump is NOT permitted.
• Always unplug this pump when moving or servicing the pump and its installation.
• Never pump flammable or explosive liquids. Only water should be pumped with this pump.
• Always wear ANSI Z87.1 safety glasses when operating this pump.

Figura 2: lateral view of the pump showing important warning and caution labels.

Instrucțiuni de configurare

The Everbilt utility pump is designed for easy setup. Follow these steps to prepare your pump for operation:

1. Attaching a Garden Hose: Attach a 1-1/4 inch inside diameter or larger garden hose (not included) to the pump's outlet. Ensure a secure connection to prevent leaks.
2. Attaching a Smaller Hose (if preferred): If you prefer to use a smaller hose, attach the adapter (Part B) to the pump (Part A) outlet. Then securely attach the smaller hose to the adapter.
3. Plasare: Place the pump in the area where water needs to be removed. Ensure the pump is fully submerged in water before plugging it in. The pump is designed to drain water from flat surfaces down to 3/16 inches.

Figura 3: Sus view of the pump illustrating the hose connection point.

For a visual guide on setup and operation, refer to the video below:

Instrucțiuni de operare

Once the pump is properly set up and submerged, operating it is straightforward:

1. Scufundați pompa: Ensure the pump is fully submerged in the water you wish to remove. The pump is designed to handle solids up to 1/8 inch in diameter, but avoid placing it directly in mud or areas with excessive debris to prevent clogging.
2. Conectare la alimentare: Plug the pump's 8-foot power cord into a 115V, GFCI protected outlet. The pump will begin operating automatically once plugged in. There is no on/off switch on the unit itself.
3. Monitorizați descărcarea de gestiune: Observe the water being discharged through the hose. The pump has a maximum flow rate of 28 gallons per minute and a maximum lifting height of 20 feet.
4. Deconectare: Once the desired water level is reached or the area is dry, unplug the pump from the electrical outlet.

See the pump in action in the following videos:

Întreţinere

Regular maintenance ensures the longevity and optimal performance of your Everbilt utility pump:

• Inspecție de rutină: Periodically unplug the pump (making certain your hands are dry and you are not standing in water). Inspect the pump intake and remove any debris, such as leaves or small particles, that may have accumulated. Then plug the pump back into the grounded GFCI outlet.
• Clearing Clogs: If the pump becomes clogged with debris, follow these steps:
  1. Deconectați pompa de la curentul electric.
  2. Unscrew the screws (typically 6) and carefully remove the base plate.
  3. Unscrew any additional screws (typically 4) and remove the impeller gasket.
  4. Remove any debris around the shaft and impeller.
  5. This pump contains cooling oil. Do NOT open the motor housing.

Depanare

If you encounter issues with your pump, refer to the common problems and solutions below:

Specificații

Figure 4: Performance data and specifications for Everbilt utility pumps.

Garanție și suport

The Everbilt 1/6 HP Plastic Utility Pump comes with a Garanție limitată de 1 ani. For warranty claims or technical support, please contact the distributor:

• Distribuit de: Home Depot
• Telefon: 1-844-883-1873
• Website: HOMEDEPOT.COM

Vă rugăm să păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.