Manual de instrucțiuni pentru raft plutitor alb WELLAND de 48 de inci cu lumină LED tactilă

1. Informații importante privind siguranța

Vă rugăm să citiți cu atenție toate instrucțiunile înainte de asamblare și utilizare. Păstrați acest manual pentru referințe ulterioare.

• Limită de greutate: The maximum weight capacity for this shelf is 10 lire sterlineNu depășiți această limită pentru a preveni deteriorarea sau vătămarea corporală.
• Montare: Ensure the shelf is securely mounted to a wall stud or using appropriate drywall anchors for stability. Improper installation can lead to the shelf falling.
• Siguranța bateriei: Use only the specified battery type (3 x AA batteries per light, not included). Do not mix old and new batteries. Remove batteries if the product is not used for an extended period.
• Plasare: Avoid placing the shelf in areas with excessive moisture or direct heat sources.

2. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe asamblarea:

• Raft x1
• Lumini LED x2
• Accessory Bag (mounting hardware)
• Assembly Instruction (this manual)

Imagine: Pesteview of the WELLAND Floating Shelf and its included components.

3. Specificații

Image: Detailed dimensions of the 48-inch floating shelf.

4. Configurare și instalare

Follow these steps for proper installation of your floating shelf.

4.1. Pregătiți-vă pentru instalare

• Instrumente necesare: You will need a drill, a level, a pencil or marker, and a screwdriver for installation.
• Locaţie: Choose a suitable wall location. Consider mounting into wall studs for maximum stability. If mounting into drywall, use appropriate anchors (included in the accessory bag).

4.2. Mount the Shelf

• Marcare: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole positions with a pencil.
• Foraj: Drill pilot holes at the marked positions. If mounting into drywall without a stud, insert the appropriate wall anchors.
• Suport securizat: Fixați suportul de montare pe perete folosind șuruburile furnizate. Asigurați-vă că este fixat ferm.
• Atașați raftul: Slide the floating shelf onto the secured mounting bracket. The streamlined design hides the support for a clean, floating appearance.

4.3. Install LED Lights

• Open Light Unit: Twist the back cover of each LED light counter-clockwise to open it.
• Introduceți bateriile: Insert 3 AA batteries into each LED light unit, ensuring correct polarity.
• Lumini securizate: Place the LED light units into the designated recesses on the underside of the shelf. Twist clockwise to secure them.

Image: Step-by-step guide for battery insertion and light installation.

5. Operating Instructions (LED Light)

The WELLAND Floating Shelf features touch-activated LED lights for convenient illumination.

• Pornire/Oprire: To activate the LED light, gently touch the center of the light unit. To turn it off, touch the center again.
• Ieșire luminoasă: The LED lights provide a gentle glow, ideal for accent lighting or reading.

6. Întreținere

• curatenie: Wipe the shelf surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Înlocuire baterie: If the LED lights dim or stop working, replace the 3 AA batteries in each unit. Follow the installation steps in Section 4.3 to access and replace batteries.
• Inspecţie: Periodically check the mounting hardware to ensure the shelf remains securely attached to the wall.

7. Depanare

8. Garanție și asistență

For any questions, concerns, or support regarding your WELLAND Floating Shelf, please contact the manufacturer directly. Specific warranty details may vary and are typically provided with your purchase documentation.

You can visit the official WELLAND store for more information and contact options: WELLAND Store