Manual de utilizare pentru înregistratorul video de rețea PoE cu 32 de canale Hikvision DS-7732NI-K4/16P

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-K4/16P 32-Channel PoE Network Video Recorder (NVR). This NVR supports up to 32 channels, with 16 Power over Ethernet (PoE) ports, 4K (8-Megapixel) resolution recording, USB backup, and ONVIF compatibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Informații de siguranță

• Ensure the NVR is placed on a stable, level surface to prevent accidental falls.
• Nu expuneți dispozitivul la apă sau umezeală.
• Utilizați numai adaptorul de alimentare furnizat împreună cu dispozitivul.
• Evitați blocarea orificiilor de ventilație pentru a preveni supraîncălzirea.
• Adresați toate lucrările de service către personal calificat.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• Hikvision DS-7732NI-K4/16P NVR Unit
• Adaptor de alimentare și cablu de alimentare
• Mouse USB
• Cablu HDMI
• Cablu Ethernet
• Telecomanda
• Ghid de pornire rapidă / Manual de instrucțiuni
• HDD Mounting Screws (if applicable)

4. Configurare

4.1 Conexiuni fizice

1. Conectați monitorul: Conectați un monitor la NVR utilizând fie portul HDMI, fie portul VGA.
2. Conectați mouse-ul: Conectați mouse-ul USB la unul dintre porturile USB ale NVR-ului.
3. Conexiune retea: Connect the NVR to your network router using an Ethernet cable.
4. Conexiune cameră: Connect your PoE IP cameras to the available PoE ports on the NVR. For third-party cameras, ensure they are ONVIF compatible.
5. Pornire: Connect the power adapter to the NVR and then plug it into a power outlet. The NVR will power on automatically.

Imaginea 1: Faţă view of the Hikvision DS-7732NI-K4/16P NVR unit, showing the power button, status indicators, and USB ports.

4.2 Initial Configuration (Adding a Third-Party Camera)

1. Ensure the camera is physically connected to the NVR via an Ethernet cable and the connection is secure.
2. On the NVR's display screen, once an image is shown, click the "Add Camera" icon (small circle with a plus sign) on the bottom bar.
3. In the Protocol section at the top left, select "ONVIF."
4. Click "Search." Once the connected device appears on the screen, select it and click "Add all."
5. After completing the setup, click "Go back." You should now see the newly added camera's live feed on the display.

5. Instrucțiuni de utilizare

5.1 Înregistrare

The NVR automatically records footage from connected cameras to the installed hard drive. It supports 4K (8-Megapixel) resolution for high-quality video capture. Ensure a compatible hard drive (up to 24TB) is installed for continuous recording.

5.2 Redare

Acces înregistrat footage through the NVR's user interface. Use the mouse to navigate the timeline and select specific dates and times for playback. The system allows for fast-forward, rewind, and frame-by-frame review.

5.3 USB Backup

To back up important footage, insert a USB storage device into one of the NVR's USB ports. Navigate to the backup menu in the system settings, select the desired footage, and initiate the backup process. Ensure the USB device has sufficient storage capacity.

5.4 ONVIF Compatibility

The NVR is compatible with ONVIF (Open Network Video Interface Forum) standard cameras, allowing for integration with a wide range of third-party IP cameras. This ensures flexibility in expanding your surveillance system.

6. Întreținere

• Regularly check for firmware updates to ensure optimal performance and security.
• Keep the NVR and cameras clean, free from dust and debris.
• Ensure adequate ventilation around the NVR to prevent overheating.
• Periodic review inregistrat footage and system logs for any anomalies.

7. Depanare

7.1 No Video Signal from Camera

• Check all cable connections (Ethernet, power) to the camera and NVR.
• Verify the camera is powered on and its status indicator is active.
• Ensure the camera's IP address and network settings are correctly configured and compatible with the NVR.
• If it's a third-party camera, confirm ONVIF compatibility and proper integration steps (refer to Section 4.2).

7.2 NVR Not Recording

• Check if a hard drive is installed and properly recognized by the NVR.
• Verify recording schedules and settings in the NVR's configuration menu.
• Ensure the hard drive has sufficient free space.

8. Specificații

9. Garanție și asistență

This Hikvision product comes with a two-year warranty against factory defects. For technical support or warranty claims, please contact your authorized Hikvision dealer or visit the official Hikvision support website-ul.