Introducere
The Weiser Phoenix Venetian Bronze Passage Door Knob is designed for interior doors that do not require a locking mechanism. This includes applications such as hallway doors and closet doors. Its traditional design and Venetian Bronze finish complement various home décors. The knob is reversible, allowing installation on both left-handed and right-handed doors.
Image: Weiser Phoenix Venetian Bronze Passage Door Knob, showcasing its traditional design and finish.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- 1 Set of Door Knobs (Interior and Exterior)
- 1 Latch mechanism
- 1 Strike plate
- Șuruburi de montare
- Manual de instalare
Specificații uși
Ensure your door meets the following specifications for proper fit and function:
- Grosimea ușii: 1-3/8 inches to 1-3/4 inches (35mm - 44mm)
- Latch Backset: Adjustable for 2-3/8 inches or 2-3/4 inches (60mm or 70mm)
- Cross Bore: 2-1/8 inchi (54 mm)
Configurare și instalare
Installation of the Weiser Phoenix Passage Door Knob is designed to be straightforward and can typically be completed with a screwdriver.
- Pregătiți ușa: Ensure the door has the correct bore holes and backset. If replacing an existing knob, remove the old hardware.
- Instalați zăvorul: Insert the latch mechanism into the edge bore hole of the door. Ensure the latch bolt faces the door frame. Secure it with the provided screws. The latch is adjustable to fit either a 2-3/8 inch or 2-3/4 inch backset.
- Instalați butonul exterior: Place the exterior knob assembly through the 2-1/8 inch cross bore hole, ensuring the spindle aligns with the latch mechanism.
- Instalați butonul interior: Position the interior knob assembly over the spindle and align the mounting posts with the holes on the exterior assembly.
- Fixați butoanele: Fasten the interior and exterior knob assemblies together using the provided screws. Tighten securely, but do not overtighten, to ensure smooth operation.
- Instalați placa de blocare: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
- Funcționare de testare: Open and close the door several times, turning the knobs to ensure the latch retracts and extends smoothly without binding.
Instrucțiuni de operare
The Weiser Phoenix Passage Door Knob is a non-locking mechanism designed for easy access. To open a door equipped with this knob:
- Grasp either the interior or exterior knob.
- Turn the knob in either direction (clockwise or counter-clockwise).
- Push or pull the door open.
The latch will retract when the knob is turned and extend automatically when the door is closed, holding the door in place without locking it.
Îngrijire și întreținere
To maintain the appearance and functionality of your Weiser Phoenix Door Knob, follow these guidelines:
- curatenie: Curățați butonul cu o lavetă moale,amp Evitați produsele de curățare abrazive, solvenții sau substanțele chimice dure, deoarece acestea pot deteriora finisajul.
- Lubrifiere: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the latch bolt. Do not use oil-based lubricants, as they can attract dust and debris.
- Strângere: Periodically check the mounting screws for tightness. If the knobs feel loose, gently tighten the screws to ensure secure attachment.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Knob is loose or wobbly. | Șuruburile de montare sunt slăbite. | Tighten the mounting screws connecting the interior and exterior knob assemblies. |
| Zăvorul nu se retrage lin. | Resturi în mecanismul de blocare sau lipsă de lubrifiere. | Clean the latch mechanism. Apply a small amount of silicone-based lubricant to the latch bolt. |
| Door does not close properly or rattles. | Strike plate misalignment. | Adjust the position of the strike plate on the door frame to ensure proper alignment with the latch bolt. |
| Butonul este greu de rotit. | Over-tightened mounting screws or misaligned components. | Loosen mounting screws slightly and re-test. Ensure all components are correctly aligned during installation. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Weiser |
| Numărul de model | 9GA1010-015 |
| Stil | Hall/Closet (Passage) |
| Culoare | Bronz venețian |
| Termina | Periat |
| Formă | Rundă |
| Tip mâner | Buton |
| Tip blocare | Fără blocare |
| Compatibilitatea grosimii ușii | 1-3/8" - 1-3/4" |
| Închidere înapoi | Adjustable 2-3/8" - 2-3/4" |
| Cross Bore | 2-1/8" |
| Greutatea articolului | 480 g |
| Dimensiunile produsului | 11.58 x 7.59 x 7.59 cm |
| Caracteristica specială | Usor de instalat |
Informații despre garanție
This Weiser product comes with a 30 de zile garanție. For specific details regarding mechanical and finish warranties, please refer to the documentation included with your purchase or visit the official Weiser website-ul.
Asistență pentru clienți
For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information and additional resources on the official Weiser website:
Visit Weiser's Official Website-ul
Please have your model number (9GA1010-015) and purchase information ready when contacting support.
