Progress Lighting Zura Bath & Vanity Light Fixture P300062-015 Instruction Manual

Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting Zura Bath & Vanity Light Fixture, model P300062-015. The Zura fixture features triangular, etched opal glass and a polished chrome finish, designed to complement modern bathroom aesthetics. Please read these instructions thoroughly before beginning installation to ensure safe and proper operation.

Informații de siguranță

AVERTISMENT: Risc de electrocutare.

• Always disconnect power at the main circuit breaker before installation, servicing, or changing bulbs.
• Consultați un electrician calificat dacă nu sunteți sigur de procesul de instalare.
• Toate conexiunile electrice trebuie să fie în conformitate cu codurile electrice locale și naționale.
• Nu depășiți puterea maximătage specificat pentru becuri.
• This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Wash hands after handling.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea.

• Light Fixture Assembly (P300062-015)
• Etched Opal Glass Shades (2)
• Kit hardware de montare
• Foaie de instalare

Specificații

Configurare și instalare

Follow these steps carefully to install your Zura Bath & Vanity Light Fixture. Professional installation is recommended if you are unfamiliar with electrical wiring.

1. Pregătiți-vă pentru instalare

• Opriți alimentarea: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tester.
• Despachetare conținut: Scoateți cu grijă toate componentele din ambalaj și verificați dacă prezintă deteriorări.
• Adunați instrumente: You will typically need a screwdriver, wire strippers, electrical tape, and a voltage tester.

2. Montarea dispozitivului de fixare

The Zura fixture can be mounted either vertically or horizontally.

Image: The Zura fixture can be installed in either a vertical or horizontal orientation to suit your design preference.

• Atașați placa de montare: Secure the fixture's mounting plate to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached.
• Conexiuni prin cablu: Connect the fixture's wires to the corresponding house wires:
  • Negru (Fierbinte) către Negru (Fierbinte)
  • Alb (Neutru) către Alb (Neutru)
  • Cupru verde sau gol (împământare) către cupru verde sau gol (împământare)
  Use wire nuts to secure connections and wrap with electrical tape for added safety.
• Fixare sigură: Carefully tuck the wires into the junction box and align the fixture base with the mounting plate. Secure the fixture to the mounting plate using the provided screws.

3. Installing Glass Shades and Bulbs

Imagine: Detaliată views of the fixture's components, including the glass shades and polished chrome accents.

Image: Bulb and dimming information for the Zura fixture, indicating E26 medium base and A19 frosted bulbs are recommended, and the fixture is dimmable with compatible switches.

• Introduceți becuri: Screw two E26 medium base bulbs into the sockets. The fixture is compatible with incandescent, CFL, or LED bulbs up to 100 watts each. Frosted A19 bulbs are recommended for optimal light diffusion.
• Atașați abajururile de sticlă: Carefully slide each etched opal glass shade over the bulb and secure it according to the fixture's design (typically with a retaining ring or screws). Ensure they are snug but do not overtighten.

Odată ce instalarea este finalizată, restabiliți alimentarea la întrerupătorul de circuit.

Instrucțiuni de operare

The Progress Lighting Zura Bath & Vanity Light Fixture is designed for simple operation.

• Pornire/Oprire: Control the light fixture using a standard wall switch connected to the electrical circuit.
• Funcția de reglare a luminii: This fixture is dimmable. If you wish to use the dimming feature, ensure you have installed dimmable bulbs and a compatible wall dimmer switch.

Întreţinere

Curatenie

• Fixare: To clean the polished chrome finish, wipe with a soft, damp cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
• Abajururi din sticlă: The etched opal glass shades can be cleaned with a mild glass cleaner and a soft cloth. Ensure the shades are cool before cleaning.
• Always ensure the power is off before cleaning any part of the fixture.

Înlocuirea becului

• Deconectați alimentarea: Before replacing bulbs, turn off the power at the circuit breaker.
• Lăsați să se răcească: Allow old bulbs to cool completely before touching them.
• Remove Shades: Carefully remove the glass shades to access the bulbs.
• Înlocuiți becurile: Unscrew the old bulbs and screw in new E26 medium base bulbs, not exceeding 100 watts per bulb.
• Reattach Shades: Reinstall the glass shades securely.
• Restabiliți puterea: Reporniți alimentarea la întrerupător.

Depanare

Garanție și suport

Your Progress Lighting Zura Bath & Vanity Light Fixture is covered by a Garanție limitată de 1 ani de la producător. This warranty guarantees your satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting website-ul.

Resurse online: Pentru informații suplimentare și asistență, vizitați Magazinul Progress Lighting de pe Amazon.