KLH Bassbite-II

KLH Bassbite-II Powered Subwoofer

Model: Bassbite-II (E206825)

1. Introducere și Pesteview

Thank you for choosing the KLH Bassbite-II Powered Subwoofer. This unit is designed to enhance the low-frequency response of your existing audio system, providing deep, rich bass for an immersive listening experience. This manual provides essential information for the safe and effective operation of your subwoofer.

Faţă view of the KLH Bassbite-II Powered Subwoofer

Figura 1.1: Față view of the KLH Bassbite-II Powered Subwoofer with grille.

This image shows the front of the KLH Bassbite-II subwoofer, featuring its dark gray cabinet and a removable front grille that covers the speaker driver. The KLH logo is visible at the bottom of the grille.

2. Instrucțiuni importante de siguranță

Please read and follow all safety instructions before operating the subwoofer to prevent electric shock, fire, or injury.

3. Conținutul pachetului

Vă rugăm să verificați pachetul pentru următoarele articole:

Dacă lipsesc sau sunt deteriorate articolele, vă rugăm să contactați distribuitorul.

4. Configurare

4.1. Plasare

The placement of your subwoofer can significantly affect its sound performance. Experiment with different locations to find the best bass response for your room.

4.2. Conexiuni

The KLH Bassbite-II subwoofer offers multiple connection options to integrate with your audio system. Ensure all components are turned off before making any connections.

Rear panel of the KLH Bassbite-II Powered Subwoofer showing inputs and controls

Figure 4.1: Rear panel of the KLH Bassbite-II Subwoofer.

This image displays the rear panel of the subwoofer, featuring the speaker level inputs/outputs ("FROM AMPLIFIER", "TO SPEAKERS"), RCA low-level inputs, a power switch, and a volume control knob. The attached power cord is also visible.

Close-up of the rear panel connections on the KLH Bassbite-II Subwoofer

Figure 4.2: Close-up of the connection panel.

Un detaliat view of the connection panel, highlighting the speaker wire terminals (red and black clips) for "FROM AMPLIFIER" and "TO SPEAKERS", and the RCA jacks for "LOW LEVEL" input. The "POWER" switch and "VOLUME" knob are also clearly visible.

Option 1: Low-Level (RCA) Connection (Recommended for Receivers with Subwoofer Output)

  1. Connect an RCA cable from the "SUBWOOFER OUT" or "LFE OUT" jack on your receiver/amplifier to the "LOW LEVEL" (L or R) input on the Bassbite-II subwoofer. If your receiver has a single LFE output, connect it to either the L or R input on the subwoofer.
  2. Asigurați-vă că întrerupătorul de alimentare al subwooferului este în poziția OFF.
  3. Plug the subwoofer's power cord into a standard 120 VAC, 60 Hz electrical outlet.

Option 2: Speaker Level Connection (For Amplifiers without Subwoofer Output)

  1. Connect speaker wires from the "SPEAKER OUT" terminals of your amplifier/receiver to the "FROM AMPLIFIER" speaker level inputs on the Bassbite-II subwoofer. Ensure correct polarity (+ to + and - to -).
  2. Connect speaker wires from the "TO SPEAKERS" outputs on the Bassbite-II subwoofer to your main left and right speakers. Again, ensure correct polarity.
  3. Asigurați-vă că întrerupătorul de alimentare al subwooferului este în poziția OFF.
  4. Plug the subwoofer's power cord into a standard 120 VAC, 60 Hz electrical outlet.

5. Instrucțiuni de utilizare

5.1. Pornire/Oprire

5.2. Reglarea volumului

The "VOLUME" knob on the rear panel controls the output level of the subwoofer.

6. Întreținere

Proper care will ensure the longevity and performance of your KLH Bassbite-II Subwoofer.

KLH Bassbite-II Subwoofer with the front grille removed, showing the bass port

Figure 6.1: Subwoofer with grille removed.

This image shows the KLH Bassbite-II subwoofer with its front grille detached, revealing the bass reflex port located at the bottom of the front baffle. This port helps enhance the low-frequency output.

7. Depanare

Dacă întâmpinați probleme cu subwooferul, consultați următoarele probleme și soluții comune:

ProblemăCauza posibilaSoluţie
Fără puterePower cord not connected; Power switch off; Outlet not working.Ensure power cord is securely plugged into the subwoofer and a working electrical outlet. Flip the power switch to ON. Test the outlet with another device.
Fără sunetIncorrect connections; Volume too low; Source device not sending signal.Check all audio connections (RCA or speaker wires) for proper seating and polarity. Increase the subwoofer's volume knob. Ensure your receiver/amplifier is powered on and sending an audio signal.
Distorted or Boomy SoundVolume too high; Improper placement; Source signal distortion.Decrease the subwoofer's volume. Experiment with different placement locations (refer to Section 4.1). Check if the audio source itself is distorted.
Zgomot de bâzâitGround loop; Nearby electrical interference.Try plugging the subwoofer into a different electrical outlet (preferably on a different circuit). Ensure all audio cables are high quality and properly shielded. Avoid running audio cables parallel to power cables.

8. Specificații

Numele modeluluiBassbite-II
Numărul de modelE206825 (KLH Bassbite-II)
MarcaKLH
Tip difuzorSubwoofer alimentat
Putere maximă de ieșire a difuzorului40 wați
Sursa de alimentareCorded Electric (120 VAC, 60 Hz)
Dimensiuni (Îl x l x A)38.1 cm x 22.9 cm x 26.7 cm (15 inci x 9 inci x 10.5 inci)
Greutate6.35 kg (14 lbs)
Dispozitive compatibileVideo Game Consoles, Home Theater Systems, Televisions

9. Garanție și asistență

For specific warranty information, please refer to the documentation provided by your retailer at the time of purchase. Manufacturer warranty details are typically included with new products.

If you require technical support or have questions regarding your KLH Bassbite-II Subwoofer, please contact your original retailer or visit the official KLH Audio Systems website pentru resurse de asistență.

Note: The product description mentions a "Two weeks Return/Refund Guarantee" which refers to a seller's return policy and not a manufacturer's warranty.

Documente conexe - Bassbite-II

Preview Manual de utilizare pentru subwooferul amplificat din seria KLH Windsor
Manual de utilizare pentru subwooferele amplificate KLH Windsor 10 și Windsor 12, care conține instrucțiuni de siguranță, conexiuni, comenzi, specificații și informații despre garanție.
Preview Manualul subwooferului activ KLH Stratton: Configurare, specificații și siguranță
Ghid complet pentru subwooferele amplificate KLH Stratton 10 și Stratton 12, care acoperă configurarea, conexiunile, instrucțiunile de siguranță, caracteristicile și specificațiile tehnice.
Preview Manual de utilizare și specificații pentru difuzorul KLH Model Three
Ghid complet pentru boxele acustice cu suspensie KLH Model Three, care acoperă introducerea, istoricul, principiile de proiectare, configurarea, conectarea, poziționarea, acustica încăperii și specificațiile.
Preview Manual și ghid de instalare pentru difuzorul exterior KLH Faraday F-6600-AW pentru toate condițiile meteorologice
Ghid complet pentru boxele de exterior KLH Faraday F-6600-AW, potrivite pentru toate condițiile meteorologice, care acoperă informații despre siguranță, amplasare, instalare, conectare, întreținere și garanție.
Preview Manual de utilizare pentru difuzorul canalului KLH Story Center
Acest manual de utilizare oferă informații esențiale pentru difuzorul KLH Story Center Channel, inclusiv instrucțiuni de siguranță, despachetare, ghiduri de conectare, recomandări de amplasare, reglarea porturilor, detalii despre garanție și specificații tehnice. Optimizați-vă experiența audio home theater cu KLH.
Preview Boxă KLH Kendall 2C cu canal central - Produs terminatview și Specificații
Informații detaliate despre difuzorul KLH Kendall 2C cu canal central, inclusiv caracteristici, instrucțiuni de configurare, instrucțiuni de siguranță și specificații tehnice. Aflați despre designul său, ampconfirmare, amplasare și garanție.