1. Introducere
The SMARTGEN BAC06 series switching battery charger is engineered with the latest switch power components, specifically designed for charging lead-acid starting batteries. This charger is ideal for float charging applications, ensuring optimal battery health and longevity. The BAC06A-24V model provides a maximum charging current of 3A for 24V systems.
Caracteristicile cheie includ:
- Designed with a switching power structure, offering a wide range of AC voltage input, compact volume, light weight, and high efficiency.
- Utilizează un doi-stage charging method (constant current followed by constant voltage) to fully consider the charging properties of lead-acid batteries, preventing overcharging and extending battery life.
- Incorporates short circuit and reverse connection protection for enhanced safety.
- Vol. De încărcaretage and current can be adjusted on-site via potentiometers.
- LED indicators provide clear power and charging status.
- Horizontal installation type for the BAC06A model, ensuring easy setup.
2. Informații de siguranță
Please read all safety instructions carefully before installing or operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Asigurați-vă că volumul de intraretage range (90-280VAC) is compatible with your power supply.
- Always disconnect power before making or breaking connections to the battery or AC input.
- Do not operate the charger in wet or damp conditii.
- Asigurați o ventilație adecvată în jurul încărcătorului pentru a preveni supraîncălzirea.
- Verify correct polarity when connecting to the battery (B+ to positive, B- to negative) to avoid reverse connection damage.
- The charger is designed for lead-acid batteries only. Do not use with other battery types.
- In case of smoke, unusual odors, or abnormal operation, immediately disconnect power and contact qualified personnel.
3. Produs terminatview și Componente
The BAC06A-24V charger features a robust design with clearly labeled terminals and indicators for ease of use and installation.
Figura 3.1: Față view of the BAC06A-24V charger. This image displays the input terminals (L, N), output terminals (B-, B+), fuse, LED indicators for Power and Charging, and adjustment potentiometers for voltage și curent.
Figura 3.2: Înclinat view of the BAC06A-24V charger, highlighting its compact black metal casing with ventilation holes and the green terminal block.
Figura 3.3: lateral view of the BAC06A-24V charger, illustrating the heat sink fins designed for efficient heat dissipation.
Identificarea componentelor:
- Terminale L, N: Conexiuni de intrare CA (fază și neutru).
- Terminale B-, B+: DC output connections for battery (Negative and Positive).
- SIGURANȚĂ: 10A fuse for protection.
- LED POWER: Indică atunci când unitatea este pornită.
- LED-ul de încărcare: Indicates when the battery is actively being charged.
- Potențiometru de reglare a tensiunii: Used to fine-tune the output voltage.
- AMP Potențiometru reglabil: Used to fine-tune the charging current.
4. Configurare și instalare
The BAC06A-24V is designed for horizontal installation. Follow these steps for proper setup:
- Montare: Securely mount the charger in a well-ventilated area using the mounting holes on its base. Ensure there is adequate space around the unit for air circulation, especially near the heat sink fins.
- Conexiune de intrare AC: Connect the AC power supply (90-280VAC, 50/60Hz) to the 'L' and 'N' terminals. Use appropriate gauge wiring for your installation.
- Conexiune baterie: Connect the battery to be charged to the 'B+' and 'B-' terminals. Ensure correct polarity: connect the battery's positive terminal to 'B+' and the negative terminal to 'B-'.
- Verificare inițială: Before applying power, double-check all connections for tightness and correct polarity.
Figure 4.1: Case dimensions for BAC06A (horizontal) and BAC06V (vertical) models. The BAC06A has dimensions of 143mm (length) x 96mm (width) x 55mm (height).
5. Instrucțiuni de utilizare
Once installed, the BAC06A-24V operates largely automatically. Follow these guidelines for optimal performance:
- Pornire: Apply AC power to the charger. The 'POWER' LED will illuminate, indicating the unit is active.
- Proces de încărcare: If a connected battery requires charging, the 'CHARGING' LED will illuminate. The charger will automatically enter the two-stage charging process: constant current phase followed by constant voltage faza.
- Voltage Ajustare: Volumul de ieșiretage can be fine-tuned using the 'VOLTS ADJ.' potentiometer. This allows for precise matching to specific battery float charge requirements.
- Ajustare curentă: The charging current can be adjusted using the 'AMP ADJ.' potentiometer. This is useful for setting the maximum charge rate.
- Taxă plutitoare: Once the battery reaches full charge, the charger will maintain a float voltage, preventing overcharging and ensuring the battery remains topped up. The 'CHARGING' LED may turn off or dim depending on the battery's state.
Nota: The charger is designed for permanent connection to generator starter batteries and provides overload and short circuit protections to avoid disconnection during cranking.
6. Întreținere
The BAC06A-24V charger is designed for low maintenance. However, regular checks can ensure its longevity and reliable operation:
- Curăţenie: Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Ventilare: Ensure that the ventilation holes and heat sink fins are not obstructed. Proper airflow is crucial for preventing overheating.
- Conexiuni: Periodically check all wiring connections (AC input and DC output) for tightness and signs of corrosion. Loose connections can lead to poor performance or damage.
- Verificarea siguranței: If the charger fails to power on or charge, check the 10A fuse. Replace it only with a fuse of the same type and rating.
- Conditii de mediu: Ensure the operating environment remains within the specified temperature range (-30°C to +55°C) and humidity (10%RH ~ 95%RH, non-condensing).
7. Depanare
This section provides solutions to common issues you might encounter with your BAC06A-24V charger.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Charger not powering on (POWER LED off) | No AC input power; Blown fuse; Internal fault. | Check AC power source and connections. Verify the 10A fuse and replace if necessary. If problem persists, contact support. |
| CHARGING LED not illuminating | Battery fully charged; Incorrect battery connection (reverse polarity); Battery voltage too low; Internal fault. | Confirm battery requires charging. Check battery polarity. Ensure battery voltage is within charger's operating range. |
| Încărcătorul se încălzește excesiv | Poor ventilation; Overload condition. | Ensure adequate airflow around the unit. Reduce load if possible. If overheating continues, disconnect and contact support. |
| Ieșire voltage/current cannot be adjusted | Potentiometer fault; Internal circuit issue. | Contactați asistența pentru asistență. |
8. Specificatii tehnice
Detailed technical specifications for the BAC06A-24V charger are provided below:
Figure 8.1: Comprehensive technical specifications for the BAC06A charger, including input, output, insulation, working conditions, and physical profile.
| Categorie | Articol | Specification (24V Model) |
|---|---|---|
| Intrare | Vol. AC nominaltage | AC (100~250)V |
| Max. AC Voltage | AC (90~280)V | |
| Frecvența AC | 50Hz/60Hz | |
| Max. Curent de intrare | 2A | |
| Eficienţă | >85% | |
| Consumul de energie fără sarcină | <3W | |
| Ieșire | Curent de încărcare | 2A~3A (Error±2%) |
| Factory Charging Current | 3A | |
| Max. Putere | 85W | |
| Vol. fără încărcaretage | 27.6 V (eroare ± 1%) | |
| Izolare | Rezistenta de izolare | Between input and output, input and shell both are: DC500V 1min RL≥50MΩ |
| Izolație Voltage | Between input and output, input and shell both are: AC1500V 50Hz 1min Leakage current: IL≤3.5mA | |
| Conditii de munca | Temperatura de operare | (-30~+55)°C |
| Temperatura de depozitare | (-40~+85)°C | |
| Umiditatea de lucru | 10%RH ~ 95%RH (No condensation) | |
| Profile (BAC06A) | Greutate netă | 0.65 kg |
| Dimensiuni (L*L*H) | 143 mm × 96 mm × 55 mm |
9. Garanție și asistență
For warranty information, please refer to the documentation provided with your purchase or contact your local SMARTGEN distributor. SMARTGEN is committed to providing high-quality products and customer satisfaction.
If you encounter any issues not covered in this manual or require further assistance, please contact SMARTGEN customer support through their official website or authorized service centers. When contacting support, please have your product model number (BAC06A-24V) and purchase details ready.
