1. Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of the CDVI 433MHz Radio Keypad (Digicode) and its associated SEL2641R433NN 1-Relay 12V Receiver. This system is designed for secure access control applications.
Please read this manual thoroughly before attempting any installation or operation to ensure proper functionality and safety.
Figure 1: CDVI 433MHz Radio Keypad and SEL2641R433NN Receiver. The image shows the silver-colored keypad with illuminated blue numbers (0-9, A, B, C) and a transparent plastic receiver unit.
2. Informații de siguranță
- Asigurați-vă că toate sursele de alimentare sunt deconectate înainte de instalare sau întreținere.
- Instalarea trebuie efectuată numai de personal calificat.
- Do not expose the keypad or receiver to extreme temperatures, moisture, or direct sunlight.
- Use only specified power supply (12V).
- A nu se lăsa la îndemâna copiilor.
3. Configurare și instalare
3.1. Componente pesteview
Sistemul este alcătuit din două componente principale:
- Radio Keypad (Digicode): The input device for entering access codes.
- SEL2641R433NN Receiver: The unit that receives signals from the keypad and controls the access mechanism (e.g., door lock).
3.2. Montarea tastaturii
- Choose a suitable mounting location, typically near the access point, ensuring it is protected from direct weather exposure if outdoors.
- Mark the drilling points using the keypad's mounting plate as a template.
- Dați găuri și introduceți diblurile de perete corespunzătoare.
- Fixați placa de montare pe perete.
- Attach the keypad securely to the mounting plate.
3.3. Cablarea receptorului
The SEL2641R433NN receiver requires a 12V power supply and connection to the access control device. Refer to the wiring diagram below for typical connections.
- Putere de intrare: Connect 12V DC to the designated terminals. Observe polarity.
- Ieșire releu: The receiver has one relay. Connect the Normally Open (NO) or Normally Closed (NC) contacts to your access control device (e.g., electric strike, magnetic lock) as required.
(Note: A detailed wiring diagram is typically provided with the physical product. Consult it for specific terminal assignments.)
4. Instrucțiuni de utilizare
4.1. Pornirea inițială
Once the receiver is wired and powered, it will enter a standby mode. The keypad will illuminate when a button is pressed.
4.2. Programming Access Codes
The keypad and receiver must be paired, and access codes programmed. This process typically involves:
- Intrarea în modul de programare: This usually involves a master code or a physical button on the receiver.
- Adding New Codes: Follow the specific sequence to input new user codes (e.g., Master Code + * + New Code + #).
- Deleting Codes: Follow the specific sequence to remove existing user codes.
- Ieșirea din modul de programare: Save changes and exit programming mode.
(Note: Refer to the specific programming instructions provided with your product for exact key sequences and procedures, as these can vary by firmware version.)
4.3. Acordarea accesului
To grant access, simply enter a valid programmed code on the keypad. Upon successful code entry, the receiver's relay will activate for a pre-set duration, unlocking the connected device.
5. Întreținere
- curatenie: Curățați suprafața tastaturii cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Verificări regulate: Periodically check all wiring connections for security and integrity, especially for the receiver unit.
- Managementul codului: În mod regulat review and update access codes for security purposes. Delete codes of former users.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Tastatura nu răspunde. | No power to receiver or keypad not paired. | Check 12V power supply to receiver. Ensure keypad is correctly paired with the receiver. |
| Access code not working. | Incorrect code entered, code not programmed, or keypad/receiver not paired. | Verify code. Re-program code. Re-pair keypad and receiver. |
| Door/lock not activating. | Incorrect wiring to lock, faulty lock, or relay issue. | Check wiring connections. Test the lock mechanism independently. Consult a technician if relay is suspected faulty. |
| Funcționare pe rază scurtă de acțiune sau intermitentă. | Radio interference or receiver antenna issue. | Check for sources of radio interference. Ensure receiver antenna is unobstructed. |
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numerele de model | SEL2641R433NN, GALEOR1R, F1002000052 |
| Frecvenţă | 433MHz |
| Sursa de alimentare a receptorului | 12V DC |
| Ieșire releu | 1 Relay (NO/NC contacts) |
| Tip tastatură | Radio (fără fir) |
| ASIN | B06VWH6V57 |
8. Garanție și asistență
Information regarding product warranty is typically provided with the purchase documentation or can be found on the manufacturer's official website. Vă rugăm să păstrați dovada achiziției pentru reclamații în garanție.
For technical support or further assistance, please contact CDVI customer service or your authorized dealer. Contact details can usually be found on the CDVI website (www.cdvi.com).
