1. Introducere
This user manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ROGER TECHNOLOGY E80/TX52R/2 remote control. This 2-channel fixed code remote operates at 433.92 MHz and features a convenient copy function, allowing it to duplicate signals from compatible existing remotes. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Informații de siguranță
- Keep the remote control out of reach of children to prevent accidental operation or ingestion of small parts.
- Nu expuneți telecomanda la apă, umiditate excesivă sau temperaturi extreme.
- Avoid dropping or subjecting the remote control to severe impacts.
- Only use the specified battery type (AAA) and ensure correct polarity during installation.
- Aruncați bateriile uzate în mod responsabil, conform reglementărilor locale.
- Do not attempt to disassemble or modify the remote control, as this will void the warranty and may cause malfunction.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 1 x ROGER TECHNOLOGY E80/TX52R/2 Remote Control
- 1 x Manual de utilizare (acest document)
- (Batteries may or may not be included, depending on the retailer. Typically, 1x AAA battery is required.)
4. Produs terminatview
The E80/TX52R/2 remote control is designed for ease of use and reliability. It features two distinct buttons for controlling two separate channels, making it suitable for various applications such as garage doors, gates, or other compatible fixed-code receivers. The integrated copy function allows for simple duplication of existing fixed-code remote signals.
Figura 1: Față view of the E80/TX52R/2 Remote Control. Note the two primary control buttons, the LED indicator, and the ROGER TECHNOLOGY branding.
Componente cheie:
- Butonul 1: Top left button, typically used for Channel 1.
- Butonul 2: Top right button, typically used for Channel 2.
- Indicator LED: Small light at the top center, illuminates during transmission or programming.
- Programming Port/Hole: Small hole at the bottom left, used for specific programming procedures.
5. Configurare
5.1 Instalarea bateriei
The E80/TX52R/2 remote control requires one AAA battery. To install or replace the battery:
- Localizați capacul compartimentului bateriei de pe spatele telecomenzii.
- Glisați sau desfaceți cu grijă capacul pentru a deschide compartimentul.
- Insert one AAA battery, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
- Închideți bine capacul compartimentului bateriei.
5.2 Programming the Remote (Copy Function)
This remote control can copy the signal from an existing fixed-code remote. Ensure your existing remote is functional and has a fixed code operating at 433.92 MHz.
- Clear Existing Code: Press and hold both buttons (Button 1 and Button 2) simultaneously on the new E80/TX52R/2 remote until the LED indicator flashes rapidly (approximately 5-10 seconds). Release both buttons. The LED should now flash slowly, indicating it's ready to learn.
- Intrați în modul de învățare: Press and hold the button on the new remote that you wish to program (e.g., Button 1). The LED will illuminate steadily.
- Telecomenzi de poziție: Hold your existing remote control close to the new E80/TX52R/2 remote, ideally back-to-back or side-by-side, ensuring their transmitters are aligned.
- Semnal de transmisie: While holding the button on the new remote, press and hold the corresponding button on your existing remote that you want to copy.
- Confirm Copy: The LED on the new E80/TX52R/2 remote should flash rapidly, then turn solid, indicating a successful copy. Release both buttons.
- Repetați pentru alte butoane: If you wish to program the second button, repeat steps 2-5 for Button 2.
- Funcționalitate de testare: After programming, test the new remote control with your receiver to ensure it operates correctly.
Nota: If the LED does not flash rapidly or the copy process fails, ensure the existing remote is transmitting a strong signal and try repositioning the remotes. Some rolling code remotes are not compatible with this copy function.
6. Instrucțiuni de utilizare
Once programmed, operating the E80/TX52R/2 remote control is straightforward:
- To Activate Channel 1: Press and hold Button 1. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
- To Activate Channel 2: Press and hold Button 2. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
Ensure you are within the effective operating range of your receiver (up to 10 meters, depending on environmental factors and receiver sensitivity).
7. Întreținere
- curatenie: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Înlocuire baterie: Replace the AAA battery when the LED indicator becomes dim or the remote's range decreases significantly. Follow the battery installation steps in Section 5.1.
- Depozitare: Depozitați telecomanda într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme, atunci când nu o utilizați pentru perioade lungi de timp.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Telecomanda nu funcționează după programare. | Incorrect programming; incompatible original remote; low battery. | Re-attempt programming carefully following Section 5.2. Ensure the original remote is fixed code and 433.92 MHz. Replace battery. |
| LED does not light up when pressing a button. | Baterie descărcată sau instalată incorect. | Verificați polaritatea bateriei sau înlocuiți-o cu o baterie AAA nouă. |
| Raza de acțiune redusă. | Low battery; interference; obstruction. | Replace battery. Ensure clear line of sight to receiver. Move away from sources of interference. |
| Cannot clear existing code (LED doesn't flash rapidly). | Buttons not pressed simultaneously or long enough. | Ensure both buttons are pressed firmly and held for the required duration (5-10 seconds). |
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | E80/TX52R/2 |
| Marca | TEHNOLOGIA ROGER |
| Frecvenţă | 433.92 MHz |
| Numărul de canale | 2 |
| Tip cod | Fixed Code (with copy function) |
| Sursa de alimentare | 1 x baterie AAA |
| Gama maximă | Până la 10 metri (33 picioare) |
| Culoare | Gri deschis |
| Dispozitive compatibile | Home automation devices, household appliances (with compatible 433.92 MHz fixed code receivers) |
10. Garanție și asistență
For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. ROGER TECHNOLOGY products are designed for reliability, and support is available for any operational issues or inquiries.
For further assistance, you may visit the official ROGER TECHNOLOGY website or contact their customer service department. Please have your model number (E80/TX52R/2) ready when seeking support.
