1. Introducere
This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your HILTI 232244 Eccentric Pin Diamond Coring Sawing tool. Please read this manual thoroughly before initial use and keep it for future reference. Understanding and following these instructions will help ensure optimal performance and extend the lifespan of your tool.
2. Informații de siguranță
Avertismente generale de siguranță: Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves. Ensure the work area is well-lit and clear of obstructions. Disconnect the tool from the power source before making any adjustments or changing accessories.
- Siguranta electrica: Asigurați-vă că sursa de alimentare corespunde cerințelor uneltei. Evitați utilizarea uneltei înamp sau condiții umede.
- Siguranța zonei de lucru: Keep children and bystanders away while operating the tool. Do not operate power tools in explosive atmospheres.
- Siguranța personală: Stay alert, watch what you are doing, and use common sense. Do not operate the tool while tired or under the influence of drugs, alcohol, or medication.
- Utilizarea și îngrijirea uneltelor: Do not force the tool. Use the correct tool for your application. Maintain tools with care, keeping cutting accessories sharp and clean.
3. Configurare
Before beginning any coring or sawing operation, proper setup is crucial for safety and performance.
- Inspectați componentele: Verify all parts of the HILTI 232244, including the eccentric pin, diamond coring bit, and sawing blade, are free from damage.
- Attach Coring Bit/Sawing Blade: Securely attach the appropriate diamond coring bit or sawing blade to the tool spindle. Ensure it is tightened according to manufacturer specifications to prevent loosening during operation.
- Conexiune de alimentare: Connect the tool to a suitable power source. Ensure the power cord is not damaged and is positioned to avoid tripping hazards.
- Fixarea piesei de prelucrat: Firmly secure the material to be cored or sawn. Movement of the workpiece during operation can lead to injury or damage to the tool.
- Alimentare cu apă (dacă este cazul): For wet coring/sawing, connect the water supply system and ensure proper flow for cooling and dust suppression.
4. Instrucțiuni de utilizare
Follow these guidelines for effective and safe operation of your HILTI 232244 tool.
- Pornirea instrumentului: Ensure the tool is properly positioned on the workpiece. Turn on the power.
- Coring Technique: Apply steady, even pressure. Avoid excessive force, which can overheat the diamond segment and reduce cutting efficiency. Allow the diamond to do the work.
- Sawing Technique: Guide the saw blade smoothly along the cutting line. Maintain a consistent speed and avoid twisting the blade.
- Răcire: If using wet coring/sawing, ensure continuous water flow to cool the diamond segments and flush away debris.
- Oprirea instrumentului: Release the trigger or switch off the power. Wait for the bit/blade to come to a complete stop before setting the tool down.
5. Întreținere
Regular maintenance ensures the longevity and optimal performance of your HILTI 232244.
- curatenie: After each use, clean the tool, especially the spindle and ventilation openings, to remove dust and debris. Use a dry cloth.
- Inspecţie: Regularly inspect the power cord for damage, the eccentric pin for wear, and the diamond coring bits/sawing blades for dullness or cracks. Replace worn or damaged parts immediately.
- Lubrifiere: Refer to the tool's specific service instructions for any required lubrication points.
- Depozitare: Store the tool in a dry, secure location, out of reach of children. Protect it from extreme temperatures.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Instrumentul nu pornește | Fără alimentare; Cablu deteriorat; Întrerupător defect | Check power connection; Inspect cord; Contact service center |
| Performanță redusă de tăiere | Dull diamond bit/blade; Insufficient water flow (wet applications); Incorrect pressure | Replace/sharpen bit/blade; Check water supply; Adjust operating pressure |
| Vibrații excesive | Loose bit/blade; Damaged spindle; Unbalanced workpiece | Tighten bit/blade; Inspect spindle; Secure workpiece properly |
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | HILTI |
| Numărul de model | 232244 |
| Material | Diamant |
| Greutatea articolului | 16 uncii (1 lira) |
| Tip de finisare | Diamant |
| Număr de unități | 1.0 număr |
| Sunt necesare baterii? | Nu |
8. Garanție și asistență
For warranty information, please refer to the documentation included with your purchase or visit the official HILTI website. For technical support, service, or to order replacement parts, please contact HILTI customer service directly. Ensure you have your model number (232244) and purchase date available when contacting support.
HILTI Contact Information: Vă rugăm să vizitați www.hilti.com for local contact details.