HobbyWing Quicrun 1060 Brushed ESC Instruction Manual

1. Produs terminatview

The HobbyWing Quicrun 1060 Brushed Electronic Speed Controller (ESC) is engineered for 1/10 and 1/12 scale remote-controlled cars and trucks. This waterproof unit offers reliable performance and is designed for ease of use, featuring a Tamiya battery plug for broad compatibility. It supports various running modes and battery types, making it a versatile choice for brushed motor setups.

Figure 1: HobbyWing Quicrun 1060 Brushed ESC

2. Ce se află în cutie

• Hobbywing speed control with Tamiya battery plug

3. Caracteristici cheie

• 60 Amp Power: Provides robust power delivery for brushed motors.
• Waterproof Electronics: Ensures reliable operation in various environmental conditions.
• Multiple Running Modes: Supports Forward/Reverse/Brake, Forward/Brake, and Forward/Reverse modes.
• LiPo Cutoff Capability: Compatible with LiPo batteries up to 3S, with built-in low voltage cutoff protection.
• Integrated Tamiya Battery Plug: Simplifies connection to common RC battery packs.

Figure 2: Tamiya Logo, indicating compatible battery plug type.

4. Configurare și instalare

4.1 Conexiuni de cablare

1. Conexiune motor: Connect the ESC's motor wires (blue and yellow) to your brushed motor. The order may affect motor rotation; reverse if necessary.
2. Conexiune baterie: Plug your battery pack into the ESC's Tamiya connector. Ensure correct polarity.
3. Conexiune la receptor: Plug the ESC's signal cable (usually black, red, white/yellow) into the throttle channel (typically Channel 2) of your RC receiver.
4. Întrerupător: Montați întrerupătorul de alimentare într-un loc accesibil pe vehicul.

4.2 Jumper Cap Settings

The Quicrun 1060 ESC uses jumper caps to configure various settings, including running mode, battery type, and BEC output voltage. Refer to the detailed chart in your physical user manual for specific configurations. Incorrect settings can damage the ESC or battery.

Key Jumper Settings:

• Mod de rulare: Select between Forward/Reverse/Brake, Forward/Brake, or Forward/Reverse.
• Tip baterie: Choose between NiMH or LiPo to ensure proper low voltage cutoff.
• Vol. ieşire BECtage: Reglați volumultage supplied to your receiver and servos (e.g., 6.0V or 7.4V).

4.3 Calibrarea clapetei

To ensure proper operation, the ESC must be calibrated to your transmitter's throttle range. Follow these general steps:

1. Turn on your transmitter and ensure all throttle trims are at neutral.
2. Conectați bateria la ESC.
3. Hold the throttle stick at full throttle (highest position) and turn on the ESC.
4. The motor will emit a series of beeps. Once you hear the first beep, move the throttle stick to full brake (lowest position).
5. After another series of beeps, move the throttle stick to the neutral position.
6. The ESC will emit a final series of beeps, indicating successful calibration.

5. Moduri de operare

The Quicrun 1060 ESC offers three primary operating modes, configurable via jumper caps:

• Forward/Reverse/Brake Mode: Standard mode for general driving, allowing forward, reverse, and braking.
• Forward/Brake Mode: Ideal for racing, providing only forward movement and braking, with no reverse.
• Mod Înainte/Înapoi: Suitable for rock crawling or specific applications where immediate reverse is needed without a brake delay.

Consult your user manual's jumper cap chart for detailed instructions on how to select each mode.

6. Întreținere

• curatenie: Regularly clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Inspecţie: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
• Depozitare: Store the ESC in a dry, cool environment away from direct sunlight and extreme temperatures.

7. Depanare

• Fără putere: Check battery connection, power switch, and ensure the battery is charged.
• Motorul nu răspunde: Verify receiver connection, throttle calibration, and motor wiring.
• Operație neregulată: Re-calibrate the throttle range. Check for interference or loose connections.
• Supraîncălzire: Ensure proper ventilation around the ESC. Check motor load and gearing.

For more detailed troubleshooting, refer to the comprehensive troubleshooting guide in your user manual or contact HobbyWing support.

8. Specificații

9. Garanție și asistență

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official HobbyWing webPăstrați dovada achiziției pentru orice reclamații în garanție.