Baseus GMSWA-01

Manual de utilizare pentru gamepad-ul vibrator Baseus SW cu senzor de mișcare

Model: GMSWA-01

1. Introducere

Mulțumesc pentru achizițieasing the Baseus SW Motion Sensing Vibrating Gamepad. This manual provides detailed instructions for the proper use, setup, and maintenance of your new gamepad. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

The Baseus SW Motion Sensing Vibrating Gamepad (Model: GMSWA-01) is designed for an immersive gaming experience, featuring motion sensing capabilities and vibration feedback. It comes in a transparent black finish, allowing a view of its internal components.

Baseus SW Motion Sensing Vibrating Gamepad, transparent black

Figure 1: Baseus SW Motion Sensing Vibrating Gamepad. This image shows the transparent black gamepad from an angled perspective, highlighting its internal circuitry and button layout.

2. Caracteristici cheie

3. Conținutul pachetului

La deschiderea coletului, vă rugăm să verificați dacă toate articolele sunt prezente și în stare bună:

Baseus Gamepad with packaging and Type-C cable

Figure 2: Package contents. The image displays the Baseus gamepad, its retail packaging, and the included Type-C charging cable.

4. Configurare și conectare

4.1 Încărcarea gamepad-ului

  1. Locate the Type-C charging port on the gamepad.
  2. Connect the provided Type-C cable to the gamepad's charging port.
  3. Connect the other end of the cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
  4. The indicator light on the gamepad will illuminate to show charging status. It will turn off or change color when fully charged.

4.2 Asocierea cu un dispozitiv

The Baseus SW Gamepad is designed for use with compatible gaming consoles or devices. Specific pairing instructions may vary slightly depending on your device.

  1. Asigurați-vă că gamepad-ul este suficient încărcat.
  2. Turn on your gaming console or device.
  3. On the gamepad, press and hold the pairing button (refer to the button layout diagram in Section 5.1 for location) for a few seconds until the indicator lights begin to flash rapidly. This indicates the gamepad is in pairing mode.
  4. On your console/device, navigate to the Bluetooth or controller settings and select "Pair New Device" or similar option.
  5. Select "Baseus SW Gamepad" from the list of available devices.
  6. Once successfully paired, the indicator lights on the gamepad will stop flashing and remain solid.
Baseus Gamepad being used with a Nintendo Switch console

Figure 3: Gamepad in use with a gaming console. This image shows a user holding the Baseus gamepad while a Nintendo Switch console is docked and displaying a game.

5. Operating the Gamepad

5.1 Dispunerea și funcțiile butoanelor

Familiarize yourself with the gamepad's button layout:

Buton/ComponentăFuncţie
Stâlpul analogic stângMovement, camera control
Stick analog dreaptaCamera control, aiming
D-Pad (Directional Pad)Menu navigation, specific actions
Butoane A/B/X/YAction buttons (context-dependent)
Butoane L/RNasturi pe umeri
Declanșatoare ZL/ZRTrigger buttons (e.g., shooting, accelerating)
Butonul AcasăReturn to console home screen
Buton Captură de ecranCapture capturi de ecran
Plus (+) / Minus (-) ButtonsStart/Select or menu options
Turbo Button (if applicable)Enables rapid fire for assigned buttons (check specific model features)

5.2 Motion Sensing

The gamepad features built-in gyroscopes and accelerometers for motion sensing. This allows for intuitive control in games that support motion input. Calibrate the motion sensors if you experience inaccurate tracking by following your console's calibration procedure.

5.3 Feedback la vibrații

The gamepad provides haptic feedback through vibrations, enhancing immersion during gameplay. The intensity of vibration is typically controlled by the game or console settings.

6. Îngrijire și întreținere

7. Depanare

ProblemăCauză/Soluție posibilă
Gamepad does not turn on.Battery is depleted. Charge the gamepad fully.
Gamepad does not connect to console/device.
  • Ensure the gamepad is in pairing mode.
  • Check if the console's Bluetooth is enabled.
  • Move the gamepad closer to the console.
  • Remove previous pairings from the console and re-pair.
  • Restart both the gamepad and the console.
Buttons or analog sticks are unresponsive.
  • Ensure the gamepad is properly connected.
  • Check for physical obstructions or damage.
  • Restart the gamepad and console.
  • Update console/gamepad firmware if available.
Motion sensing is inaccurate.Recalibrate the motion sensors through your console's settings.
Feedback-ul prin vibrații nu funcționează.
  • Check game settings to ensure vibration is enabled.
  • Check console settings for vibration options.

8. Specificațiile produsului

AtributDetaliu
MarcaBaseus
Numele modeluluiGMSWA-01 (GS01)
MaterialPC
CuloareTransparent Black
Capacitatea bateriei550mAh/3.7V
IntrareType-C input 5V 550mAh
Curent nominal de operare35mA
Dimensiuni produs (L x l x H)156.2 mm x 101.0 mm x 64.8 mm
Greutatea produsului207.5g (fara ambalaj)
Caracteristici specialeMotion Sensing, Vibrating

9. Informații despre garanție

Baseus products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Baseus website-ul.

10. Asistență pentru clienți

If you encounter any issues or have questions regarding your Baseus SW Motion Sensing Vibrating Gamepad that are not addressed in this manual, please contact Baseus customer support. You can typically find contact information on the official Baseus website-ul sau pe ambalajul produsului.

Suport online: Vizitați pagina oficială Baseus website pentru întrebări frecvente, descărcări de drivere și resurse de asistență.

Asistență prin e-mail: Refer to your product's warranty card or the Baseus website pentru adresa de e-mail a serviciului clienți.

Documente conexe - GMSWA-01

Preview Încărcător auto wireless MP3 Baseus - Manual de utilizare model PB3062Z
Manual de utilizare pentru încărcătorul auto wireless MP3 Baseus Enjoy (model PB3062Z) cu ​​Bluetooth 5.0, care acceptă încărcare wireless și încărcare rapidă USB. Include parametrii produsului, instrucțiuni de utilizare și sfaturi de siguranță.
Preview Manual de utilizare ventilator magnetic pentru bancheta spate Baseus CXZR-01 Natural Wind
Manual de utilizare pentru ventilatorul magnetic pentru bancheta spate Baseus CXZR-01 Natural Wind, care detaliază caracteristicile, specificațiile, instrucțiunile de utilizare și informațiile despre garanție. Acest ventilator portabil oferă setări cu două viteze și montare magnetică pentru tetierele mașinii.
Preview Baseus Palm CCZC20CE 20W USB-C Greitasis Įkroviklis: Trumpas Pradžios Vadovas
Vadovas su naudojimo instrukcijomis, techniniais parametrais and garantijos sąlygomis Baseus Palm CCZC20CE 20W USB-C greitajam įkrovikliui. Sužinokite, kaip saugiai ir efektyviai naudoti jūsų Baseus įkroviklį.
Preview Manual de utilizare pentru căștile wireless Baseus Bowie H1i cu anulare a zgomotului
Manual de utilizare complet pentru căștile wireless cu anulare a zgomotului Baseus Bowie H1i, care acoperă configurarea, funcționarea, caracteristicile și instrucțiunile de siguranță.
Preview Baseus Big Energy Car Mount Wireless Charger User Manual (PB3066Z)
User manual for the Baseus Big Energy Car Mount Wireless Charger (Model WXJN-01), detailing its features, usage instructions, safety precautions, and technical specifications for iPhone 12 series.
Preview Baseus S1 Pro Беспроводные Наушники: Руководство Пользователя и Характеристики
Полное руководство пользователя для беспроводных наушников Baseus S1 Pro. Узнайте о характеристиках, подключении, управлении и комплектации.