FORA Painless Design Adjustable Lancing Device

FORA Painless Design Adjustable Lancing Device User Manual

Model: Painless Design Adjustable Lancing Device

1. Introducere

Thank you for choosing the FORA Painless Design Adjustable Lancing Device. This device is designed to assist in obtaining blood samples for glucose monitoring with enhanced comfort and safety. Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

Caracteristici cheie:

2. Informații de siguranță

Always follow basic safety precautions when using this lancing device to reduce the risk of injury or infection.

3. Produs terminatview

Familiarize yourself with the components of your FORA Lancing Device:

Diagram of FORA Lancing Device components: Cap, Depth indicator, Ejector, Release Button.

Figura 3.1: Components of the FORA Lancing Device. This diagram illustrates the main parts: the protective cap, the depth indicator for setting penetration level, the ejector mechanism for safe lancet removal, and the release button to activate the lancing action.

4. Configurare

4.1 Inserting a Lancet

  1. Deșurubați capacul dispozitivului de înțepare.
  2. Introduceți ferm o lancetă nouă, sterilă, în suportul pentru lancetă.
  3. Twist off the protective cap from the lancet. Retain this cap for safe disposal later.
  4. Replace the lancing device cap by screwing it back on.

4.2 Adjusting Penetration Depth

The lancing device features 6 adjustable depth settings. Rotate the cap to select the desired depth. A higher number indicates a deeper penetration.

Three-step illustration for collecting blood samples: 1. Select desired depth, 2. Pull cocking control back, 3. Lance the finger.

Figura 4.1: Steps for preparing and using the lancing device. This image demonstrates selecting the penetration depth, cocking the device, and performing a finger prick.

5. Instrucțiuni de utilizare

5.1 Performing a Blood Sample (Fingerstick)

  1. Spălați-vă bine pe mâini cu apă caldă și săpun, apoi uscați-le complet.
  2. Ensure a new lancet is inserted and the depth setting is appropriate for your skin type (refer to Section 4.2).
  3. Pull the cocking control back until it clicks. The device is now armed.
  4. Așezați ferm dispozitivul de ințepare pe partea laterală a vârfului degetului.
  5. Press the release button to activate the lancet.
  6. Gently massage your finger from the base towards the tip to form a blood drop. Do not squeeze excessively.
  7. Apply the blood drop to your glucose meter test strip as instructed by your meter's manual.

5.2 Alternative Site Testing (AST)

The FORA Lancing Device includes a clear alternate site end cap for testing on areas other than the fingertip, such as the forearm or palm. Consult your healthcare professional before performing AST, as results from alternative sites may differ from fingertip results, especially during periods of rapid glucose change.

  1. Remove the standard cap and replace it with the clear AST cap.
  2. Select a suitable depth setting (AST generally requires a deeper setting due to thicker skin).
  3. Pull the cocking control back until it clicks.
  4. Press the clear AST cap firmly against the chosen alternative site (e.g., forearm or palm) and hold for a few seconds to create a vacuum.
  5. Apăsați butonul de eliberare.
  6. Gently massage the area to form a blood drop.
  7. Apply the blood drop to your glucose meter test strip.

5.3 Safely Disposing of a Used Lancet

Proper disposal of used lancets is crucial to prevent accidental needle sticks and the spread of infection.

Two-step illustration for safely disposing of a used lancet: 1. Safely dispose by pushing the exposed tip into a protective disk, 2. Slide the ejector forward to remove the used lancet.

Figura 5.1: Steps for safe lancet disposal. This image shows how to cap the lancet and then use the ejector mechanism to remove it from the device.

  1. Deșurubați capacul dispozitivului de ințepare.
  2. Carefully place the protective cap (removed in Section 4.1) back onto the used lancet, ensuring the needle is fully covered. Alternatively, if your lancets come with a protective disk, push the exposed tip into the disk on a hard surface.
  3. Slide the ejector forward to release the capped lancet into an approved sharps container.
  4. Puneți la loc capacul dispozitivului de înțepare.

6. Întreținere

6.1 Curățarea dispozitivului de înțepare

6.2 Depozitare

7. Depanare

If you encounter issues with your lancing device, refer to the table below for common problems and solutions.

ProblemăCauza posibilaSoluţie
Device does not cock or fire.Device not fully cocked; lancet not inserted correctly; device malfunction.Ensure the cocking control is pulled back until it clicks. Re-insert lancet. If problem persists, contact customer support.
Sânge insuficient sample.Depth setting too shallow; insufficient blood flow; cold hands.Increase depth setting. Warm hands before testing. Gently massage the lanced area.
Pain during lancing.Depth setting too deep; reused lancet; lancing on calloused area.Decrease depth setting. Always use a new lancet. Choose a different lancing site.
Lancet cannot be ejected.Lancet stuck; ejector mechanism obstructed.Ensure the cap is removed. Gently try to slide the ejector. If stuck, carefully remove with tweezers and dispose of safely.

8. Specificații

CaracteristicăDetaliu
ModelPainless Design Adjustable Lancing Device
Setări de adâncime6 niveluri reglabile
Lancet CompatibilityMost standard lancets (28-33 gauge)
DimensiuniAproximativ 6.1 x 3.2 x 1 inci
GreutateAproximativ 1.6 uncii
ProducătorForaCare Inc.
ASINB01INS8T5I

9. Garanție și asistență

For warranty information, technical support, or to purchase accessories, please contact FORA customer service or visit the official FORA website-ul.

You can find more information about FORA products and support at the FORA Store on Amazon.

Documente conexe - Painless Design Adjustable Lancing Device

Preview Informații pentru utilizatori și date de acuratețe pentru testul de glucoză din sânge FORA 6
Ghid complet pentru benzile de testare a glicemiei FORA 6, care acoperă avertismente, utilizarea preconizată, limitări, manipulare, proceduri de testare, interpretarea rezultatelor, controlul calității, compoziția chimică, datele de acuratețe și studiile privind performanța utilizatorilor. Include informații pentru profesioniștii din domeniul sănătății și autotestare.
Preview Ghidul utilizatorului pentru glucometrul FORA Diamond MINI
Un ghid concis pentru utilizarea glucometrului FORA Diamond MINI pentru autotestare. Aflați cum să măsurați nivelurile de glucoză din sânge cu precizie și siguranță, cu instrucțiuni pas cu pas.
Preview Glucometru FORA Diamond GD50: Ghid de instrucțiuni
Acest ghid oferă instrucțiuni pas cu pas pentru utilizarea glucometrului FORA Diamond GD50 pentru autotestare. Aflați cum să pregătiți dispozitivul, să vă testați glicemia și să eliminați materialele utilizate în siguranță.
Preview FORA 6 Benzi de testare a glicemiei - Ghid de utilizare și specificații
Acest document oferă informații complete despre benzile de testare a glicemiei FORA 6, inclusiv utilizarea preconizată, limitările, depozitarea, manipularea, procedurile de testare și rezultatele cu precizie. Este conceput atât pentru profesioniștii din domeniul sănătății, cât și pentru persoanele care își gestionează diabetul.
Preview Ghidul utilizatorului pentru glucometrul FORA 6 Connect
Un ghid concis pentru utilizarea glucometrului FORA 6 Connect pentru autotestare, inclusiv configurare, operare și conectivitate la aplicație.
Preview Instrucțiuni, specificații și date de precizie pentru banda de testare FORA 6
Ghid complet pentru benzile de testare FORA 6 pentru glicemie, hematocrit și hemoglobină, care acoperă utilizarea preconizată, avertismentele, limitările, depozitarea, procedurile de testare, rezultatele preciziei și valorile de referință.