Introducere
The HME T-Post Trail Camera Holder is a practical accessory designed for securely mounting trail cameras on T-post style fence posts. This holder simplifies the process of positioning your trail camera, ensuring you capture ideal shots and footage for wildlife monitoring, research, or outdoor photography. Its high-quality design and adjustable features make it a versatile choice for various camera models.
Ce este în cutie
Vă rugăm să vă asigurați că toate componentele sunt prezente înainte de a continua instalarea:
- Suport reglabil
- Șaibă metalică
- Mașină de spălat cauciuc
- Piuliță aripă (2)
- Threaded Wing Screw
Configurare și instalare
Follow these steps to properly install your HME T-Post Trail Camera Holder and attach your trail camera:
- Attaching the Holder to a T-Post:
Unscrew the threaded knob on the holder far enough to allow the holder to slide over and around any side of a standard T-post style fence post. Once positioned, screw the knob back in to tighten the threads against the T-post until the holder is securely mounted. - Attaching Your Trail Camera:
Once the holder is securely fastened to the T-Post, attach your trail camera to the threaded end of the adjustable camera holder. The holder features a 1/4" by 20mm thread, accommodating most trail cameras on the market. - Adjusting Camera Position:
After the camera is installed, rotate it into the desired position. Use the wing nuts to tighten and secure this position, ensuring your camera remains stable.
Image 1: The HME T-Post Trail Camera Holder securely attached to a T-post.
Image 2: A trail camera mounted on the HME T-Post Holder, ready for use in an outdoor setting.
Imaginea 3: Un prim-plan view of the holder's attachment mechanism on a T-post, showing the tightening knob.
Videoclip 1: Produs finalizatview Video. This video demonstrates the assembly and installation process of the HME T-Post Trail Camera Holder, showing how to attach it to a T-post and mount a camera.
Instrucțiuni de operare
Once installed, the HME T-Post Trail Camera Holder allows for flexible camera positioning. The adjustable design enables both vertical and horizontal adjustments to achieve the perfect camera placement for your specific needs. Ensure all wing nuts are securely tightened after making adjustments to prevent movement.
Întreţinere
The HME T-Post Trail Camera Holder is designed for durability and requires minimal maintenance. Periodically check all connection points, including the threaded knob and wing nuts, to ensure they remain tight and secure. Clean the holder with a damp cloth as needed to remove dirt or debris. Avoid using harsh chemicals that could damage the finish.
Depanare
- Camera not stable: Ensure the threaded knob securing the holder to the T-post is fully tightened. Also, verify that the wing nuts holding the camera in position are firm.
- Difficulty attaching to T-Post: Make sure the threaded knob is unscrewed sufficiently to allow the holder to slide freely over the T-post. The holder is designed for standard T-post dimensions.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Dimensiunile produsului | 7.3 x 5 x 1.3 inci |
| Greutatea articolului | 7.2 uncii |
| Numărul de model al articolului | TPCH |
| Marca | HME |
| Dispozitive compatibile | Cameras (with 1/4" by 20mm thread) |
| Tip de montare | T-Post Mount |
| Caracteristici speciale | Reglabil, rotativ |
| Culoare | Maro |
| Producător | Hme Products |
Garanție și suport
For warranty information or technical support, please refer to the official HME Products website-ul web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.
Declinarea răspunderii legale
Warning: This product may contain chemicals known to the state of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
