1. Produs terminatview
The Prime 23A 12V Alkaline Battery is a compact and powerful battery designed for various small electronic devices. This pack typically includes multiple batteries, providing a reliable power source for your needs.
It is commonly used in:
- Small remote controls, including key fobs
- Deschizători de uși de garaj
- Sisteme de securitate
- Keyless entry systems
- Compatible replacement for Craftmade Ceiling fan remote controls
Image: A pack of five Prime 23A 12V Alkaline Batteries, showing their compact size and labeling.
This battery is equivalent to several other common battery types, including 8LR23, ANSI-1181A, MN21, MS21, V23GA, VR22, A23, 1811A, 3LR50, LR-V08, SES-23A, EL12, 21/23, 23GA, MN21, and GP23AE.
2. Specificații
| Atribut | Detaliu |
|---|---|
| Marca | Prim |
| Numărul de model | 23A |
| Compoziția celulei bateriei | Alcalin |
| Voltage | 12V |
| Numărul de baterii | 5 (included in pack) |
| Greutatea articolului | 0.798 uncii |
| Dimensiuni pachet | 1.7 x 0.9 x 0.4 inci |
| Utilizări recomandate | Telecomenzi |
3. Configurare și instalare
Installing the Prime 23A 12V Alkaline Battery is a straightforward process. Always refer to the specific instructions for the device you are powering, as battery compartments and installation methods may vary.
- Identificați compartimentul bateriei: Locate the battery compartment on your device (e.g., remote control, garage door opener). This often involves sliding a cover or unscrewing a small panel.
- Remove Old Batteries (if applicable): Carefully remove any old batteries from the compartment. Dispose of old batteries responsibly according to local regulations.
- Introduceți bateria nouă: Observe the polarity markings (+ and -) inside the battery compartment. Insert the new Prime 23A 12V Alkaline Battery, ensuring that the positive (+) end aligns with the positive terminal and the negative (-) end aligns with the negative terminal. Incorrect insertion can prevent the device from functioning and may damage the battery or device.
- Compartiment securizat: Închideți bine capacul compartimentului bateriei.
- Dispozitiv de testare: Test your device to ensure it is functioning correctly with the new battery.
Image: A single Prime 23A 12V Alkaline Battery, highlighting its size and the warning label.
Avertisment important de siguranță: As indicated on the battery, these batteries are nu reîncărcabil. Attempting to recharge them may cause them to explode or leak. Always ensure correct polarity when inserting batteries. Do not mix with different battery types or use in an enclosed mixer.
4. Funcționare
Once properly installed, the Prime 23A 12V Alkaline Battery will provide power to your compatible electronic device. The battery operates by delivering a consistent 12-volt current to the device's circuitry.
No specific operational steps are required for the battery itself beyond correct installation. The device it powers will function as designed, drawing energy from the battery as needed.
5. Întreținere și depozitare
Proper maintenance and storage can help maximize the lifespan and safety of your Prime 23A 12V Alkaline Batteries.
Depozitare
- Depozitați bateriile neutilizate în ambalajul original, într-un loc răcoros și uscat, la temperatura camerei.
- Avoid extreme temperatures, both hot and cold, as these can reduce battery performance and lifespan.
- Keep batteries away from direct sunlight and sources of heat.
- Do not store batteries loose in a drawer or bag where they could come into contact with metal objects (like coins or keys), which can cause a short circuit.
Eliminare
When batteries are depleted, dispose of them responsibly. Do not dispose of batteries in household trash. Many communities have recycling programs for batteries. Check with your local waste management facility for proper disposal guidelines in your area.
Măsuri de siguranță
- Do not attempt to recharge these alkaline batteries.
- Nu dezasamblați, nu zdrobiți și nu perforați bateriile.
- Nu expuneți bateriile la foc sau apă.
- Keep batteries out of reach of small children and pets. If swallowed, seek immediate medical attention.
- If a battery leaks, avoid contact with the fluid. If contact occurs, wash thoroughly with soap and water.
6. Depanare
If your device is not functioning after installing a new Prime 23A 12V Alkaline Battery, consider the following troubleshooting steps:
- Verificați orientarea bateriei: Ensure the battery is inserted with the correct positive (+) and negative (-) polarity as indicated in the device's battery compartment.
- Verificați contactul bateriei: Make sure the battery is seated firmly and making good contact with the device's terminals. Sometimes, terminals can be slightly bent or corroded.
- Test Another Battery: If you have another new battery from the pack, try installing it to rule out a rare defective battery.
- Inspectați dispozitivul: Check the device itself for any signs of damage, corrosion in the battery compartment, or other issues that might prevent it from working.
- Consult Device Manual: Refer to the instruction manual for the specific device you are using, as it may have device-specific troubleshooting tips.
Image: A group of Prime 23A 12V Alkaline Batteries, illustrating the typical packaging and individual units.
7. Garanție și asistență
Prime 23A 12V Alkaline Batteries are designed for reliable performance. The manufacturer guarantees these batteries are fresh from the factory.
Garantie: If the batteries do not last for more than 1 year from the date of purchase, please contact the seller or manufacturer for a replacement.
For further assistance or inquiries, please refer to the contact information provided by your retailer or the Prime brand's official support channels.
