Manual de utilizare pentru foarfece electrice fără fir WORX WX082L 4V ZipSnip

Introducere

The WORX WX082L 4V ZipSnip Cordless Electric Scissors are designed for effortless cutting of various materials, reducing hand strain compared to traditional scissors. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your new tool.

Informații de siguranță

• Always ensure the tool is switched off and the safety lock is engaged when not in use or during maintenance.
• Keep hands and fingers away from the rotating blade during operation.
• Wear appropriate personal protective equipment, such as cut-resistant gloves, especially when handling or replacing the blade.
• Do not attempt to cut materials beyond the tool's specified capacity.
• Keep the tool dry and away from moisture.

Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• WORX WX082L Foarfece electrice fără fir ZipSnip 4V
• Cutting blade (pre-installed)
• Încărcător

Produs terminatview

Familiarize yourself with the components of your ZipSnip tool:

1. Lama de taiere: The rotating blade for cutting materials.
2. Protectia lamei: Provides protection and guides the blade along the cutting surface.
3. Declanșator: Activates the cutting blade when pressed.
4. Lock-out Switch: A safety mechanism that must be engaged before the trigger can activate the blade.
5. Port de încărcare: Connects the charger to the tool.
6. Indicator luminos al bateriei: Afișează nivelul actual de încărcare a bateriei.

Înființat

Încărcarea bateriei

The WORX WX082L is equipped with an internal 4V MaxLithium battery. Before first use, or when the battery indicator shows low charge, fully charge the tool.

1. Asigurați-vă că unealta este oprită.
2. Connect the included charger to the charging port on the tool (refer to Figure 4).
3. Conectați încărcătorul la o priză standard.
4. The battery indicator light will illuminate to show charging status. Charge until the indicator shows a full charge.
5. Once fully charged, disconnect the charger from the tool and the power outlet.

Instrucțiuni de operare

Operațiune generală

The ZipSnip is designed for cutting various materials such as cardboard, plastic packaging, fabric, leather, and more. Its compact design and lightweight nature (approximately 0.86 lbs) make it easy to maneuver.

1. Pregătiți materialul: Place the material to be cut on a stable, flat surface.
2. Prindeți unealta: Hold the ZipSnip firmly with one hand, ensuring a comfortable and secure grip.
3. Activarea siguranței: Press the lock-out switch (Figure 3) with your thumb.
4. Activate Blade: While holding the lock-out switch, press the trigger to start the rotating blade.
5. Începeți tăierea: Guide the tool along the desired cutting line. The flat surface of the blade guard helps maintain a straight cut.
6. Eliberare: Release the trigger to stop the blade. The safety lock will automatically re-engage.

Cutting Different Materials

The ZipSnip is versatile and can handle various materials. For optimal results, ensure the material is laid flat and stable.

Întreţinere

Înlocuirea lamei

Over time, the blade may become dull despite its self-sharpening feature. Replace the blade when cutting performance diminishes.

1. Ensure the tool is switched off and the safety lock is engaged.
2. Wear cut-proof gloves for safety.
3. Use a flat-head screwdriver to loosen the screw on the blade counterclockwise.
4. Scoateți cu grijă lama veche.
5. Align the new replacement blade with the electric scissors head hole.
6. Tighten the blade screw clockwise until secure.

Curatenie

After each use, clean the blade and surrounding area to remove any debris or material residue. Use a dry cloth or soft brush. Do not use harsh chemicals or abrasive materials.

Depanare

• Instrumentul nu pornește: Ensure the battery is fully charged. Verify that both the lock-out switch and the trigger are pressed simultaneously.
• Performanță slabă de tăiere: The blade may be dull and require replacement. Check for any material buildup around the blade that might be obstructing its movement.
• Bateria nu se încarcă: Ensure the charger is properly connected to both the tool and a working power outlet. Check the charger cable for damage.

Specificații

Garanție și suport

The WORX WX082L 4V ZipSnip Cordless Electric Scissors come with a Garanție de 3 an de la producător.

For technical support, warranty claims, or to purchase replacement parts, please contact Worx customer service or visit their official website. Refer to your product packaging for specific contact details.