JurnalTag Manual de utilizare pentru înregistratorul de date de temperatură UTRIX-16 în format PDF

1. Introducere

ButurugaTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Informații de siguranță

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Nu încercați să deschideți sau să modificați dispozitivul, deoarece acest lucru va anula garanția și poate provoca deteriorări.
• Aruncați bateriile în conformitate cu reglementările locale.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• JurnalTag UTRIX-16 PDF Temperature Data Logger
• Manual de utilizare (acest document)

4. Dispozitiv terminatview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Figura 1: Faţă view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• Indicator OK: Flashes to confirm normal operation and within-range temperature readings.
• Butonul STOP: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Figura 2: ButurugaTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Configurare

5.1 Configurare inițială

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag website-ul.

1. Download and install the LogTag Software de analiză de la JurnalTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Figura 3: ButurugaTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. ButurugaTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Informații despre baterie

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Funcționare

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Țineți apăsat butonul START/Marcați button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Țineți apăsat butonul STOP button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Apăsați scurt pe START/Marcați button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. Dispozitivul va apărea ca o unitate amovibilă.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Software de analiză.

8. Întreținere

8.1 Curățare

Ștergeți dispozitivul cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.

8.2 Înlocuirea bateriei

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Depanare

10. Specificații

11. Garanție și asistență

JurnalTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag website-ul web sau contactați distribuitorul local. Păstrați bonul fiscal ca dovadă a achiziției.

Official LogTag Website: www.logtag-recorders.com