FRYMASTER Computer Control Board User Manual

1. Produs terminatview

The Frymaster Computer Control Board, model 106-1149SP, is a replacement component designed for commercial deep fryers. This board serves as the central interface for managing fryer operations, including temperature control, cooking cycles, and error monitoring. It features a digital display and a keypad for precise input and feedback.

Imaginea 1.1: Faţă view of the Frymaster Computer Control Board 106-1149SP. The board features a central digital display, a keypad with numerical buttons (0-9), and function keys for temperature and power control. It is designed for integration into a fryer's control panel.

2. Informații de siguranță

Before installation or operation, read and understand all safety warnings and instructions. Failure to do so may result in property damage, injury, or death.

• Pericol electric: Always disconnect power to the fryer before installing, servicing, or removing the control board. Only qualified technicians should perform electrical work.
• Instalare corectă: Ensure the control board is installed correctly and securely according to the fryer manufacturer's specifications.
• Compatibilitate componente: Use only genuine Frymaster replacement parts or approved equivalents.
• Mediu de operare: Do not expose the control board to excessive moisture, heat, or corrosive substances.

3. Configurare și instalare

This section outlines the general steps for installing the control board. Refer to your specific fryer model's service manual for detailed instructions and wiring diagrams.

1. Deconectare de la curent: Turn off and unplug the fryer from its power source. Verify that all power is disconnected using a voltage metru.
2. Îndepărtarea panoului de acces: Carefully remove the fryer's control panel or access cover to expose the existing control board.
3. Wiring Disconnection: Document or photograph all wiring connections to the old control board. Label wires if necessary. Disconnect all wires and connectors.
4. Îndepărtarea plăcii vechi: Deșurubați sau desprindeți vechea placă de control de pe suporturile de montare.
5. Instalare placă nouă: Position the new Frymaster 106-1149SP control board in place and secure it with the appropriate screws or clips.
6. Conexiune cablare: Reconnect all wires and connectors to the new board, ensuring they match the documented configuration. Double-check all connections for security.
7. Reinstalarea panoului: Replace the fryer's control panel or access cover.
8. Reconectarea alimentării: Plug the fryer back into its power source.
9. Test inițial: Power on the fryer and perform an initial functional test as per the fryer's service manual.

4. Instrucțiuni de utilizare

The control board provides an intuitive interface for managing fryer operations. Specific programming and operational sequences may vary slightly depending on the fryer model and installed software version.

4.1. Operare de bază

• Pornire/Oprire: Use the designated power button (often indicated by a circle with a vertical line) to turn the fryer on or off.
• Setarea temperaturii: Press the temperature icon button (often a thermometer symbol) to enter temperature setting mode. Use the numerical keypad (0-9) to input the desired temperature. Press the checkmark or enter button to confirm.
• Cooking Cycles: The numerical buttons (1-9) may correspond to pre-programmed cooking cycles or product buttons. Press the desired button to initiate a cooking cycle.
• Left/Right Frypot Control: If applicable, the 'L' and 'R' buttons allow selection of the left or right frypot for independent control.
• Funcția de cronometru: Some models may integrate a timer function. Use the appropriate button (often a clock symbol) to set and start a timer.

4.2. Advanced Programming (Refer to Fryer Manual)

For advanced functions such as programming custom cooking cycles, calibration, or diagnostic modes, consult the specific Frymaster fryer operator's manual. These functions typically involve specific key combinations or sequences not detailed here.

5. Întreținere

Regular maintenance ensures the longevity and proper functioning of the control board.

• curatenie: Wipe the control board's surface with a soft, damp Nu folosiți produse de curățare abrazive, solvenți sau apă în exces, deoarece acestea pot deteriora componentele electronice.
• Inspecţie: Inspectați periodic placa pentru orice semne de deteriorare fizică, conexiuni slăbite sau coroziune.
• Ventilare: Ensure that the fryer's ventilation system is clear and functioning correctly to prevent overheating of internal components, including the control board.

6. Depanare

This section provides solutions for common issues. For complex problems, contact a qualified service technician.

7. Specificații

• Model: 106-1149SP
• Marca: Frymaster
• Tip: Computer Control Board (Fryer)
• ASIN: B014TEKNEU
• Primele disponibile: 2 septembrie 2015
• Compatibilitate: Designed for specific Frymaster commercial deep fryer models. Refer to your fryer's documentation for compatibility verification.

8. Garanție și asistență

This Frymaster component is typically covered by the manufacturer's standard warranty for replacement parts. Warranty terms and duration may vary. Please retain your proof of purchase.

For warranty claims, technical support, or service inquiries, please contact Frymaster customer service or an authorized Frymaster service provider. You may need to provide the model number (106-1149SP) and the serial number of your fryer.

Nota: Unauthorized repairs or modifications may void the warranty and could lead to unsafe operating conditions.