Utilitech

Utilitech White Touch Lamp Controla

Manual de instrucțiuni pentru produs

1. Produs terminatview

The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp with a metal socket into a touch-controlled lamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.

Utilitech White Touch Lamp Control unit, a small white rectangular device with a two-prong plug on one side and an outlet on the other.

Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lamp's power cord.

2. Informații de siguranță

  • Asigurați-vă că lamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
  • This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
  • Deconectați întotdeauna priza lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
  • Nu încercați să dezasamblați sau să modificați unitatea. Apelați la personal calificat pentru orice service.
  • A nu se lăsa la îndemâna copiilor.
  • Asigurați-vă că lamp you intend to convert has a metal socket for proper touch functionality.

3. Conținutul pachetului

  • 1 x Utilitech White Touch Lamp Unitatea de control

4. Configurare și instalare

  1. Pregătiți Lamp: Asigurați-vă că lamp has a metal socket. Unplug the lamp de la sursa sa de energie.
  2. Conectați unitatea de control: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
  3. Conectați Lamp: Conectați-vă lamp's power cord into the receptacle on the Utilitech Touch Lamp Unitatea de comandă.
  4. Verificați tipul becului: Confirmați că lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
  5. Test inițial: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.

Notă importantă: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.

5. Instrucțiuni de utilizare

The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.

  • To Turn On (Low Brightness): Touch any metal part of the lamp. Lamp will illuminate at its lowest brightness setting (night light).
  • To Increase Brightness (Medium): Atingeți lamp again. The brightness will increase to a medium level.
  • To Increase Brightness (High): Atingeți lamp a third time. The brightness will increase to its highest level (full brightness).
  • A opri: Atingeți lamp a fourth time. The lamp se va opri.

The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.

6. Întreținere

  • curatenie: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
  • Înlocuire bec: Deconectați întotdeauna priza lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
  • Depozitare: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.

7. Depanare

Problemă Cauza posibila Soluţie
Lamp does not turn on or respond to touch.
  • Unitatea nu este conectată.
  • Lamp not plugged into unit.
  • Lamp bulb is burnt out or incorrect type.
  • Lamp does not have a metal socket or is coated.
  • Unitate defectă.
  • Ensure unit is securely plugged into a live outlet.
  • Asigurați-vă că lamp is securely plugged into the control unit.
  • Replace bulb with a new incandescent bulb (max 200W).
  • Confirmați lamp has an exposed metal socket.
  • Test with another lamp or outlet. If issue persists, unit may be faulty.
Lamp pâlpâie sau se estompează inconsecvent.
  • Incompatible bulb type (e.g., LED, CFL).
  • Conexiune slabă.
  • Ensure only incandescent bulbs are used.
  • Verificați că toate conexiunile sunt securizate.
Lamp stays on or off.
  • Defecțiune internă.
  • Unplug the unit for 30 seconds and plug back in to reset. If issue persists, unit may be faulty.

8. Specificații

Caracteristică Detaliu
Marca Utilitech
Numărul de model 25991
Culoare Alb
Metoda de control Atingere
Compatibilitate tip sursă de lumină Incandescent
Wat maximtage 200 wați
Voltage 120 volți
Caracteristica specială Dimmable (3 levels)
Utilizare în interior/exterior De interior
Tip de montare Suport pentru plug-in
Greutatea articolului 2.78 uncii
Dimensiuni pachet 8.66 x 4.92 x 2.6 inci

9. Garanție și asistență

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.

Documente conexe -

Preview UTILITECH 83691 One-Touch Replacement Remote User Manual
User manual for the UTILITECH 83691 One-Touch Replacement Remote. Learn about button functions, battery installation, programming methods like Direct Code Entry and Auto Code Search, troubleshooting, and universal volume control. Includes FCC compliance information.
Preview Utilitech 7150-12-L Bath Fan Control Switch with Timer - Wall-Mounted LCD Touch Panel
Installation and operating instructions for the Utilitech 7150-12-L bath fan control switch. This wall-mounted LCD touch panel allows control of bath fans and lights, featuring a timer and dimming capabilities. Includes product specifications, wiring diagram, safety precautions, and customer support information.
Preview Utilitech 7116-02 Ventilation Fan with Edge-Lit LED Light Installation and Operation Manual
This manual provides detailed instructions for the installation, operation, care, and troubleshooting of the Utilitech 7116-02 Ventilation Fan with Edge-Lit LED Light. It includes product specifications, package contents, safety information, and warranty details.
Preview Utilitech LED Tape Light Quick Reference Guide
A quick reference guide for the Utilitech LED Tape Light (Model LR0005-LED36K60RGBW), providing essential safety information, preparation steps, installation instructions, care and maintenance tips, warranty details, and troubleshooting solutions for optimal use and longevity.
Preview UTILITECH Halogen Work Light MPL1025-C500K9030 User Guide and Safety Information
Get detailed instructions, safety warnings, troubleshooting tips, and warranty information for the UTILITECH Halogen Work Light (Model MPL1025-C500K9030). Learn how to safely operate, maintain, and troubleshoot your work light.
Preview Ghid de instalare și siguranță pentru lumina LED plug-in de 12 inch pentru sub dulap Utilitech
Ghid complet pentru lampa de sub dulap cu LED-uri plug-in de 12 inch Utilitech (model MXW1003-LED6K9027), care acoperă informații despre pregătire, instalare, depanare, siguranță și garanție.