Introducere
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Invicta S1 Rally Analog Watch, Model 20218. This timepiece features a 51 mm ion-plated stainless steel case, a flexible polyurethane strap, 100-meter water resistance, and a two-subdial chronograph function. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Imagine: față view of the Invicta S1 Rally Analog Watch, Model 20218, showcasing its grey dial, chronograph subdials, and black and red strap accents.
Înființat
Setarea orei
- Trageți coroana în poziția 2. Mâna secundelor se va opri.
- Rotiți coroana pentru a seta orele și minutele la ora dorită.
- Push the crown back into position 0 (normal operating position). The second hand will resume movement.
Setarea datei
- Trageți coroana în poziția 1.
- Turn the crown clockwise to set the date. Adjust the date to the day before the current date.
- Trageți coroana în poziția 2.
- Turn the crown to advance the hour hand past 12 o'clock until the date changes to the current date. Continue turning to set the correct time (AM/PM).
- Împingeți coroana înapoi în poziția 0.
Chronograph Reset to Zero Position
If the chronograph hands (second, minute) are not at the zero position after resetting, they can be adjusted as follows:
- Trageți coroana în poziția 2.
- Press button A (top pusher) repeatedly to advance the chronograph second hand to the zero position.
- Press button B (bottom pusher) repeatedly to advance the chronograph minute hand to the zero position.
- Once all chronograph hands are at zero, push the crown back into position 0.
Operațiunea
Utilizarea Cronografului
The chronograph function allows for precise timing of events up to 60 minutes.
- Pornire/Oprire: Press button A (top pusher) to start the chronograph. Press button A again to stop it.
- Resetați: While the chronograph is stopped, press button B (bottom pusher) to reset all chronograph hands to the zero position.
Utilizarea tahimetrului
The tachymeter scale on the bezel can be used to measure speed over a known distance (e.g., 1 kilometer or 1 mile) or to measure production per hour.
- To measure speed: Start the chronograph at the beginning of the measured mile/kilometer. When you reach the end of the mile/kilometer, stop the chronograph. The number indicated by the chronograph second hand on the tachymeter scale is the average speed in units per hour.
- To measure production: Start the chronograph when you begin a task. When one unit of work is completed, stop the chronograph. The number indicated by the chronograph second hand on the tachymeter scale is the number of units produced per hour.
Image: The Invicta S1 Rally Analog Watch, Model 20218, displayed on a wrist, illustrating its size and fit.
Întreţinere
Rezistenta la apa
Your Invicta S1 Rally watch is water-resistant up to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling, but it is nu recommended for scuba diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the crown or pushers while the watch is wet or submerged.
Curatenie
To maintain the appearance of your watch, wipe the case and strap with a soft, damp cloth. For the polyurethane strap, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch's finish or crystal.
Înlocuirea bateriei
This watch is powered by a product-specific quartz battery. When the battery needs replacement, it is recommended to take your watch to an authorized Invicta service center or a reputable watchmaker to ensure proper battery installation and maintenance of water resistance.
Flame Fusion Crystal Care
The watch features a Flame Fusion Crystal, known for its scratch resistance. While durable, avoid direct impact and abrasive contact to prevent damage. Clean with a soft, lint-free cloth.
Depanare
- Ceasul nu funcționează: Verificați dacă coroana este complet împinsă. Dacă ceasul tot nu funcționează, este posibil să fie nevoie să înlocuiți bateria.
- Ora/data incorectă: Refer to the "Setting the Time" and "Setting the Date" sections to re-adjust. Ensure the crown is securely pushed in after setting.
- Ace cronografului nu se resetează la zero: Follow the "Chronograph Reset to Zero Position" instructions in the Setup section.
- Apă în interiorul ceasului: If condensation or water appears inside the watch, immediately take it to an authorized service center. This indicates a breach in water resistance.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | 20218 |
| Marca | Invicta |
| Tipul de mișcare | Cuarţ |
| Diametrul carcasei | 51 Milimetri |
| Materialul carcasei | Ion Plated Stainless Steel |
| Tip cristal | Flame Fusion Crystal |
| Tipul materialului benzii | Plastic (Polyurethane) |
| Culoarea benzii | Negru |
| Adâncimea de rezistență la apă | 100 de metri (330 de picioare) |
| Funcții cronograf | 60 Second and 60 Minute Subdials |
| Afișarea datei | Date Window at 3:00 |
| Caracteristici speciale | Luminous hands/markers, Tachymeter |
| Greutatea articolului | 136 g |
| baterii | 1 baterie specifică produsului (inclusă) |
Image: Visual guide illustrating various watch case diameters for size comparison, including the 50-54mm range relevant to this watch.
Garanție și suport
Your Invicta S1 Rally Analog Watch, Model 20218, comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please contact the seller of record or visit the official Invicta webPăstrați dovada achiziției pentru validarea garanției.
Puteți găsi mai multe informații și date de contact pe Invicta Store on Amazon.
Image: The yellow Invicta branded watch box, indicating original packaging.
