TURBOSOUND iQ15

Manual de instrucțiuni pentru difuzorul amplificat Turbosound iQ15

Model: IQ15 | Marcă: TURBOSUNET

1. Introducere

The Turbosound iQ15 is a high-performance, 2500 Watt, 2-way 15-inch powered loudspeaker designed for portable PA and fixed installation applications. It incorporates advanced Klark Teknik DSP technology, speaker modeling, and ULTRANET networking capabilities to provide exceptional sound quality and system control.

Faţă view of the Turbosound iQ15 powered loudspeaker

Figura 1: Față view of the Turbosound iQ15 powered loudspeaker. This image shows the speaker's protective grille and the Turbosound logo at the bottom.

Caracteristici cheie:

  • 2-way full range loudspeaker for portable PA and installation applications.
  • 2,500 Watt power featuring Klark Teknik Class-D technology.
  • Klark Teknik Digital Signal Processing (DSP) for total system control.
  • Speaker modelling includes accurate models of industry standard speakers.
  • SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement.

2. Instrucțiuni de siguranță

Before operating your iQ15 loudspeaker, please read and understand all safety instructions. Retain these instructions for future reference.

  • Siguranta electrica: Always connect the loudspeaker to a grounded power outlet. Do not expose the unit to rain or moisture. Do not open the enclosure; there are no user-serviceable parts inside.
  • Plasare: Ensure the loudspeaker is placed on a stable, level surface or securely mounted using appropriate hardware. Avoid placing it near heat sources or in direct sunlight.
  • Protecția auzului: This product is capable of producing high sound pressure levels. Prolonged exposure to high SPLs can cause permanent hearing damage. Use hearing protection when operating at high volumes.
  • Ventilare: Asigurați o ventilație adecvată în jurul unității. Nu blocați orificiile de ventilație.
  • curatenie: Deconectați de la priză înainte de curățare. Folosiți doar o cârpă uscată.

3. Despachetarea și inspecția inițială

Upon receiving your Turbosound iQ15 loudspeaker, carefully unpack it and inspect for any signs of damage that may have occurred during transit. If damage is found, notify your dealer immediately.

Componente incluse:

  • 1 x Turbosound iQ15 2500W 2-Way 15" Speaker
  • Power Cable (region specific)
  • Ghid de pornire rapidă (nu este inclus în acest manual)

4. Configurare și conexiuni

Proper setup is crucial for optimal performance and safety of your iQ15 loudspeaker.

4.1 Plasarea fizică

The iQ15 can be used as a floor monitor, pole-mounted, or flown. Ensure the speaker is stable and secure in its chosen position.

Latura view of the Turbosound iQ15 loudspeaker showing the integrated handle

Figura 2: lateral view of the Turbosound iQ15, highlighting the integrated handle for easy transport and positioning.

4.2 Conexiune la alimentare

  1. Ensure the loudspeaker's power switch is in the OFF position.
  2. Connect the supplied power cable to the AC input on the rear panel of the iQ15.
  3. Plug the other end of the power cable into a suitable grounded electrical outlet. The iQ15 operates on Corded Electric power.

4.3 Conexiuni de intrare audio

The iQ15 features XLR connectivity for audio input. Connect your audio source (mixer, instrument, etc.) to the XLR input on the rear panel.

  • Use high-quality balanced XLR cables for optimal signal integrity.
  • Asigurați-vă că toate conexiunile sunt sigure înainte de a porni sistemul.

5. Funcționare

The Turbosound iQ15 incorporates advanced Klark Teknik DSP technology for comprehensive control over its audio characteristics.

5.1 Pornire/Oprire

  1. Before powering on, ensure all volume controls on the iQ15 and connected audio sources are set to minimum.
  2. Flip the power switch to the ON position. The power indicator LED will illuminate.
  3. Gradually increase the volume to the desired listening level.
  4. To power off, reduce volume to minimum, then flip the power switch to the OFF position.

5.2 Klark Teknik DSP Control

The integrated Klark Teknik DSP provides access to various settings, including:

  • Speaker Modelling: Select from accurate models of industry-standard speakers to emulate their sonic characteristics. Refer to the full user manual (not this document) for a list of available models and their applications.
  • Spatial Contour Control (SCC): This feature allows you to compensate the frequency response based on the physical placement of the speaker (e.g., wall-mounted, corner, free-standing). Adjust SCC settings to optimize sound clarity and balance in different environments.
  • ULTRANET Networking: The iQ15 supports ULTRANET, allowing for digital audio networking and remote control with compatible devices. Consult the ULTRANET documentation for detailed setup and operation.

Access and adjust these settings via the rear panel display and controls. Detailed navigation instructions are typically found in the comprehensive product manual.

6. Întreținere

Regular maintenance ensures the longevity and optimal performance of your Turbosound iQ15 loudspeaker.

  • curatenie: Disconnect the speaker from power before cleaning. Use a soft, dry, lint-free cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or waxes.
  • Curățarea grilei: The front grille can be gently vacuumed to remove dust and debris.
  • Depozitare: When not in use for extended periods, store the loudspeaker in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
  • Inspecţie: Periodically check cables and connections for wear or damage.

7. Depanare

This section addresses common issues you might encounter with your iQ15 loudspeaker. For more complex problems, contact customer support.

ProblemăCauza posibilaSoluţie
Fără putereCablul de alimentare este deconectat; priza nu funcționează; întrerupătorul este oprit.Check power cable connection; test outlet with another device; ensure power switch is ON.
Fără ieșire de sunetInput cable disconnected/faulty; volume too low; incorrect DSP settings; source device issue.Check XLR input cable; increase volume on speaker and source; verify DSP input/output settings; test source device.
Sunet distorsionatInput signal too high (clipping); speaker overloaded; faulty cable.Reduce input level from source; reduce speaker volume; check cables for damage.
Zgomot de zumzet sau bâzâitGround loop; faulty cable; interference from other electronics.Ensure proper grounding; try different cables; move speaker away from other electronics.

8. Specificații

Detailed technical specifications for the Turbosound iQ15 powered loudspeaker.

Dimensions of the Turbosound iQ15 loudspeaker: 10.92 inches height, 6.91 inches width, 5.85 inches depth

Figure 3: This image illustrates the dimensions of the Turbosound iQ15 loudspeaker, indicating a height of 10.92 inches, a width of 6.91 inches, and a depth of 5.85 inches.

CaracteristicăDetaliu
Numele modeluluiIQ15
Tip difuzor2-Way Full Range Loudspeaker
Dimensiunea difuzorului15 inci (diametrul difuzorului de woofer)
Putere maximă de ieșire2500 wați
Tehnologia de conectivitateXLR
Sursa de alimentareElectric cu fir
Dimensiuni produs (D x L x H)6.98" D x 5.91" L x 11.02" H
Greutatea articolului23.1 lire sterline
CuloareNegru
ProducătorMusic Tribe SUA
UPC748252143945
Tip de montareFreestanding
Tip de garanțieLimitat

9. Garanție și asistență

Your Turbosound iQ15 loudspeaker comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Turbosound website-ul.

Asistență clienți:

For technical assistance, service, or warranty claims, please contact Music Tribe US, the manufacturer of Turbosound products.

  • Producător: Music Tribe SUA
  • Suport online: Vizitați TURBOSOUND Store on Amazon or the official Turbosound website pentru resurse de asistență, întrebări frecvente și informații de contact.

Documente conexe - IQ15

Preview Ghid de pornire rapidă pentru seria Turbosound iQ: Difuzoare amplificate și subwoofere
Ghid rapid complet pentru boxele și subwooferele amplificate din seria Turbosound iQ, care detaliază configurarea, comenzile, conectarea la rețea, montarea, caracteristicile DSP și specificațiile tehnice.
Preview Difuzoare și subwoofere active din seria Turbosound iQ: Ghid de pornire rapidă
Începeți rapid să utilizați boxele și subwooferele amplificate din seria iQ de la Turbosound. Acest ghid acoperă siguranța, comenzile, funcțiile DSP, conectarea la rețea, montarea și specificațiile tehnice pentru modele precum iQ8, iQ10, iQ12, iQ15, iQ15B și iQ18B, care includ KLARK TEKNIK DSP și ULTRANET.
Preview Turbosound iQ Series Powered Loudspeakers and Subwoofers - Quick Start Guide
This document provides a quick start guide for the Turbosound iQ Series powered loudspeakers and subwoofers. It covers essential safety instructions, an overview of controls, networking capabilities (USB and ULTRANET), mounting and fixing options, technical specifications, and DSP menu structure.
Preview Turbosound TFM-AN/TFX-AN Seria StagGhid de pornire rapidă pentru monitoare e
Acest document oferă un ghid de pornire rapidă pentru seria Turbosound TFM-AN/TFX-AN.tagmonitoare electronice, inclusiv TFM122M-AN, TFM152M-AN, TFX122M-AN și TFX152M-AN. Acesta acoperă instrucțiuni importante de siguranță, informații despre produsview, controale și capacități de rețea.
Preview Ghid de pornire rapidă pentru difuzorul amplificat din seria Turbosound iX
Ghid de pornire rapidă pentru difuzorul amplificat pe 2 căi Turbosound iX Series de 1000 wați, cu tehnologie DSP Klark Teknik, telecomandă prin iPhone/iPad și streaming audio Bluetooth. Include configurare, comenzi, meniu DSP, conectivitate și specificații.
Preview Ghid de pornire rapidă Turbosound iP300: configurare, comenzi și funcții
Începeți rapid să utilizați Turbosound iP300, o boxă coloană amplificată de 600 wați, dotată cu tehnologie Klark Teknik Spatial Sound, mixer digital, streaming Bluetooth și telecomandă. Acest ghid prezintă despachetarea, comenzile, meniul DSP, conectivitatea și specificațiile.