1. Introducere
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Paulmann LED Driver. This constant current LED driver is designed to operate 700mA LED luminaires and features dimmable functionality. Please read these instructions carefully before installation and retain them for future reference.
2. Instrucțiuni importante de siguranță
- Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu toate codurile electrice locale și naționale.
- Disconnect power at the circuit breaker before installing or servicing the driver.
- Ensure correct polarity when connecting LED luminaires to the driver output.
- Do not exceed the maximum load capacity of 30W.
- Acest produs este conceput numai pentru utilizare în interior.
- Do not open the driver housing; there are no user-serviceable parts inside.
3. Produs terminatview
The Paulmann LED Driver (Model 97732) is a compact, white constant current power supply for LED lighting applications. It features universal dimming capabilities.
Image: The Paulmann LED Driver, Model 97732. The label on the driver indicates it is a Dimmable Universal LED Driver 30VA, with a primary input of 220-240Vac 50/60Hz and a secondary output of 700mA 30-43Vdc (Max. 48V no load). It also shows operating temperatures Ta=50°C and Tc=85°C, along with various safety certifications.
4. Specificatii tehnice
| Caracteristică | Caietul de sarcini |
|---|---|
| Marca | Paulman |
| Numărul de model | 97732 |
| Producător | Paulman |
| Vol. De intraretage | 220-240Vac, 50 / 60Hz |
| Curent de ieșire | 700mA curent constant |
| Ieșire Voltage Gama | 30-43Vdc (Max. 48V no load) |
| Putere maximă | 30W |
| Reglabil | Yes, with R, L, C type dimmers |
| Temperatura ambientală de funcționare (Ta) | Max. 50°C |
| Temperatura carcasei (Tc) | Max. 85°C |
| Material | Plastic |
| Culoare | Alb |
| Clasa de protectie | Clasa II |
5. Instalare și cablare
Urmați acești pași pentru o instalare corectă:
- Deconectare de la curent: Before starting any electrical work, ensure the main power supply to the circuit is switched off at the circuit breaker.
- Identificați terminalele: The driver has clearly marked input (PRI) and output (SEC) terminals. The input terminals are for AC power, and the output terminals are for DC power to the LED luminaires.
- Conectare intrare: Connect the AC mains supply (220-240Vac) to the input terminals of the driver. Ensure live, neutral, and earth connections (if applicable) are correctly wired according to local regulations.
- Conectați ieșirea: Connect your 700mA constant current LED luminaires to the output terminals of the driver. Observe correct polarity (+ to + and - to -). Ensure the total wattage of the connected LEDs does not exceed 30W.
- Secure Driver: Mount the driver in a suitable, well-ventilated location, away from direct heat sources and moisture. Ensure it is securely fastened.
- Restabiliți puterea: După ce toate conexiunile sunt sigure și verificate, restabiliți alimentarea circuitului.
Warning: Incorrect wiring can cause damage to the driver, LED luminaires, or pose a safety hazard. If you are unsure, consult a qualified electrician.
6. Funcționare
The Paulmann LED Driver provides a constant current output of 700mA, suitable for compatible LED luminaires. Once installed and powered, the connected LEDs will illuminate.
Funcționalitate de reglare a luminii: This driver is dimmable and compatible with common R, L, and C type dimmers. Connect a suitable dimmer switch to the AC input circuit of the driver to control the light output of the connected LEDs. Refer to your dimmer's instructions for specific wiring and compatibility.
7. Întreținere
The Paulmann LED Driver requires minimal maintenance. Follow these guidelines:
- curatenie: Ensure the driver is disconnected from power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspecţie: Periodically check for any visible damage to the housing or wiring. If any damage is observed, disconnect power immediately and replace the driver.
- Ventilare: Ensure the driver's ventilation is not obstructed to prevent overheating.
8. Depanare
If you encounter issues with your LED driver, refer to the following common problems and solutions:
- Fara iesire de lumina:
- Verificați dacă sursa de alimentare este conectată și activă.
- Verify all wiring connections (input and output) are secure and correct.
- Ensure the LED luminaires are compatible with a 700mA constant current driver.
- Verificați dacă apa totalătage of connected LEDs exceeds the driver's 30W maximum.
- Test the LED luminaires with a known working driver, if possible.
- Lumină pâlpâitoare sau instabilă:
- Ensure the dimmer switch is compatible with R, L, or C type dimmers and is correctly installed.
- Verificați dacă există conexiuni de cabluri slăbite.
- Verify the load is within the driver's specified range.
- Supraîncălzirea șoferului:
- Asigurați o ventilație adecvată în jurul șoferului.
- Verificați cantitatea totală de apătage of connected LEDs does not exceed 30W.
If the problem persists after attempting these solutions, contact Paulmann customer support or a qualified electrician.
9. Garanție și asistență
Specific warranty information for this product was not provided in the available data. For details regarding warranty coverage, technical support, or replacement parts, please contact Paulmann directly through their official website or customer service channels. Always provide your product model number (97732) when seeking support.
