SVS Prime Tower Speaker User Manual

1. Introducere

The SVS Prime Tower Speaker is engineered to deliver immersive, full-spectrum sound, anchoring an exceptional listening experience for both stereo music and home theater systems. Its design combines sonic accuracy with dynamic performance, elevating movies and highlighting the subtle nuances of music. This manual provides essential information for the setup, operation, and maintenance of your SVS Prime Tower Speaker.

Ce este în cutie:

• SVS Prime Tower Speaker (Single Unit)

2. Informații de siguranță

Please read all safety instructions before operating your speaker. Keep this manual for future reference.

• Nu expuneți difuzorul la apă sau umiditate excesivă.
• Asigurați o ventilație corespunzătoare în jurul difuzorului. Nu blocați nicio deschidere de ventilație.
• Place the speaker on a stable, level surface to prevent tipping.
• Evitați amplasarea difuzorului în apropierea surselor de căldură, cum ar fi calorifere, registre de căldură, sobe sau alte aparate (inclusiv ampliificatori) care produc căldură.
• Utilizați numai atașamente/accesorii specificate de producător.
• Deconectați difuzorul de la ampmai ridicat în timpul furtunilor cu fulgere sau când nu este folosit pentru perioade lungi de timp.
• Pentru toate lucrările de întreținere, adresați personalului de service calificat.

3. Configurare

3.1 Plasarea difuzoarelor

Optimal placement is crucial for achieving the best sound quality. The Prime Tower Speaker performs exceptionally well in both two-channel stereo setups and multi-channel home theater environments.

• Configurare stereo: For a two-channel system, place the speakers equidistant from your primary listening position, forming an equilateral triangle. Ensure they are placed symmetrically within the room.
• Configurarea sistemului Home Theater: In a home theater, the Prime Tower Speakers typically serve as front left and right channels. Position them on either side of your display, maintaining a similar distance from the listening position as in a stereo setup. Experiment with toe-in (angling the speakers slightly towards the listening position) to optimize imaging.
• Acustica camerei: Avoid placing speakers directly into corners, which can over-emphasize bass. Keep them a reasonable distance from walls to allow for proper bass extension and soundstagadâncimea e.

3.2 Conexiuni

Înainte de a face orice conexiune, asigurați-vă că ampliificatorul sau receptorul este oprit.

Figura 3.1: Față și laterală view of the SVS Prime Tower Speaker, showcasing its sleek Piano Gloss Black finish.

Figura 3.2: Față view of the speaker with the grille removed, revealing the 1-inch aluminum dome tweeter, 4.5-inch midrange driver, and dual 6.5-inch woofers.

Figura 3.3: Spate view of the speaker, showing the dual rear-firing ports and the high-quality binding posts for ampconexiune mai vie.

1. Cablu difuzor: Use high-quality speaker wire of appropriate gauge for your cable run length.
2. Polaritate: Conectați borna pozitivă (+) (roșu) a dispozitivului amplifier to the positive (+) terminal on the speaker. Connect the negative (-) terminal (black) on your amplifier to the negative (-) terminal on the speaker. Maintaining correct polarity is essential for proper sound reproduction.
3. Posturi de legare: The Prime Tower Speaker features robust binding posts that accept bare wire, spade connectors, or banana plugs. Ensure connections are secure to prevent signal loss or short circuits.

4. Utilizarea difuzorului

Once connected, your SVS Prime Tower Speaker is ready for use. Ensure your amplifier or receiver is powered on and set to the correct input.

• Controlul volumului: Ajustați volumul folosind ampcomenzile amplificatorului sau receptorului. Începeți la un volum redus și creșteți-l treptat până la un nivel de ascultare confortabil.
• Perioada de rodare: Like many high-fidelity speakers, the Prime Tower Speakers may benefit from a break-in period of 50-100 hours of normal use. During this time, the drivers will loosen up, and the sound quality may improve further.
• Associated Equipment: The Prime Tower Speakers are designed to integrate seamlessly with other SVS Prime or Ultra series speakers for a cohesive soundstage in multi-channel systems. They also pair well with SVS subwoofers for enhanced low-frequency performance.

5. Întreținere

Proper care will ensure the longevity and pristine appearance of your SVS Prime Tower Speaker.

• Curățarea dulapului: For the Piano Gloss Black finish, use a soft, lint-free cloth to gently wipe away dust. For smudges or fingerprints, a slightly damp Se poate folosi o lavetă urmată de una uscată. Evitați substanțele de curățare abrazive sau solvenții.
• Curățarea grătarului: If your speaker has a removable grille, it can be gently vacuumed with a soft brush attachment to remove dust.
• Îngrijire șofer: Avoid touching the speaker drivers (tweeter, midrange, woofers) directly, as this can cause damage.
• Expunerea la lumina soarelui: Avoid prolonged direct exposure to sunlight, which can cause fading or damage to the cabinet finish over time.

6. Depanare

If you experience issues with your SVS Prime Tower Speaker, consult the following common troubleshooting steps:

7. Specificații

Key technical specifications for the SVS Prime Tower Speaker:

8. Garanție și asistență

8.1 Informații despre garanție

The SVS Prime Tower Speaker comes with a Garanție limitată. For specific terms and conditions, please refer to the warranty card included with your product or visit the official SVS website-ul.

8.2 Asistență pentru clienți

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SVS customer support. Visit the official SVS website pentru cele mai recente informații de contact, întrebări frecvente și resurse suplimentare.

SVS Official Website: www.svsound.com