Introducere
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Jandy 3-inch 3-Port Diverter Valve, model 4719. This positive seal valve is designed for use in pool and spa systems, offering reliable flow control without the need for lubrication.
Figure 1: Jandy 3-Way 3-Port Diverter Valve (Model 4719). This image displays the main components of the valve, including the three connection ports, the central diverter handle, and the securing screws on the valve body.
Configurare și instalare
The Jandy 3-Port Diverter Valve is designed for straightforward installation. Proper installation is crucial for optimal performance and to prevent leaks.
- Tip conexiune: This valve utilizes solvent-weld connections for secure plumbing. Ensure all pipe ends are clean and properly prepared before applying solvent cement.
- Identificarea portului: Identify the inlet and outlet ports. The valve typically has one inlet and two outlet ports, or vice-versa, depending on the desired flow configuration.
- Directie de curgere: Plan your plumbing to ensure correct water flow through the valve. The valve's handle allows for diverting flow between the ports.
- Adjustable Stop Feature: The valve includes an adjustable stop feature. This allows for fine-tuning of flow adjustment and precise positioning of the diverter handle. Consult a plumbing professional if unsure about this adjustment.
- Etanșare: After solvent welding, allow adequate curing time as per the solvent cement manufacturer's instructions before pressurizing the system.
Instrucțiuni de operare
The Jandy 3-Port Diverter Valve provides flexible control over water flow in your pool or spa system. Its "Never Lube" design ensures smooth operation without the need for periodic lubrication.
- Diverter Handle: The central handle on the valve body is used to direct water flow. Rotate the handle to align with the desired port configuration. Markings on the valve body typically indicate flow paths (e.g., "OFF", "INL", "OUT").
- Reglarea debitului: The adjustable stop feature allows for precise control over the percentage of flow directed to each port. This can be useful for balancing water flow to different features or equipment.
- Positive Seal: The valve is designed with a positive seal mechanism, which prevents leaks and ensures consistent pressure even under demanding conditions.
- Automation Compatibility: This valve is designed for easy integration with pool and spa automation systems. Refer to your automation system's manual for specific connection and programming instructions.
Întreţinere
The Jandy 3-Port Diverter Valve is engineered for durability and minimal maintenance, featuring a "Never Lube" design.
- Nu necesită lubrifiere: Unlike traditional valves, this valve never requires lubrication. Attempting to lubricate the valve may damage its internal components and void the warranty.
- curatenie: Periodically inspect the exterior of the valve for dirt or debris. Clean with a soft cloth and mild soap solution if necessary. Avoid abrasive cleaners or solvents.
- Prevenirea scurgerilor: The valve is designed to resist leaks, breaking, melting, pressure loss, or slipping. If any issues arise, refer to the troubleshooting section.
- winterization: In colder climates, ensure the valve and associated plumbing are properly drained and protected from freezing temperatures to prevent damage.
Depanare
While the Jandy 3-Port Diverter Valve is highly reliable, occasional issues may arise. This section provides guidance for common problems.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Scurgere de apă din corpul supapei | Improper solvent weld during installation; damaged internal seal (unlikely for "never lube" design). | Verify solvent weld connections. If leakage persists and is not from connections, contact a qualified pool technician or Jandy support. |
| Difficulty Rotating Handle | Debris lodged in valve; improper installation of adjustable stop. | Ensure no debris is obstructing the handle's movement. Check the adjustable stop setting. Do not force the handle. |
| Reduced or Uneven Flow | Incorrect handle position; obstruction in plumbing lines. | Confirm the handle is fully engaged in the desired position. Check for blockages in the connected plumbing system. |
For issues not listed here or if solutions do not resolve the problem, it is recommended to contact a certified pool and spa professional or Jandy customer support.
Specificații
Key technical specifications for the Jandy 3-Way 3-Port Diverter Valve (Model 4719):
| Caracteristică | Detaliu |
|---|---|
| Marca | Jandy |
| Numărul de model | 4719 |
| Numărul piesei | JV21N |
| UPC | 052337002080 |
| Material | Clorura de polivinil (PVC) |
| Finisaj exterior | CPVC |
| Numărul de porturi | 3 |
| Dimensiunea conexiunii de intrare | 2.54 Inches (designed for 2.5" to 3" plumbing) |
| Tip de conectare la intrare | Solvent-weld |
| Dimensiunea conexiunii prizei | 2.54 Inches (designed for 2.5" to 3" plumbing) |
| Tip conexiune priză | NPT |
| Tip supapă | Multi-port Diverter Valve |
Garanție și suport
For information regarding the warranty coverage for your Jandy 3-Way Diverter Valve (Model 4719), please refer to the warranty documentation provided at the time of purchase or visit the official Jandy website. Termenii și condițiile de garanție pot varia.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Jandy customer support directly or the authorized dealer from whom you purchased the product. Contact information can typically be found on the manufacturer's website-ul sau chitanța dumneavoastră de achiziție.
