Manual de instrucțiuni pentru trepiedul Bosch Professional BT 150

Introducere

This manual provides essential information for the safe and efficient use of your Bosch Professional Tripod BT 150. Designed for stability and precision, this aluminum tripod is compatible with various Bosch lasers and levels featuring a 1/4-inch thread. Please read these instructions carefully before initial operation and keep them for future reference.

1. Configurare

1.1 Desfacerea trepiedului

1. Așezați trepiedul pe o suprafață plană și stabilă.
2. Depărtați ușor picioarele trepiedului spre exterior până când sunt complet extinse și stabile.
3. Ensure the leg braces are securely locked into position to prevent accidental collapse.

Image: Bosch BT 150 Tripod in its unfolded state, ready for use.

1.2 Reglarea înălțimii trepiedului

1. Extensia picioarelor: Deblocați clamps on each leg section. Extend the legs to the desired height (between 55 cm and 157 cm). Securely close the clamps to lock the legs in place.
2. Center Column Adjustment: Use the crank handle to precisely raise or lower the center column for fine height adjustments.

Image: Hands adjusting the leg clamps to extend the tripod legs.

Image: Hands operating the crank handle to adjust the height of the tripod's center column.

1.3 Mounting a Device

1. The tripod head features a 1/4-inch mounting screw.
2. Attach your laser or level securely to the mounting screw on the tripod head. Ensure it is tightened firmly to prevent movement.

Image: A hand securing a device onto the 1/4-inch mounting screw of the tripod head.

2. Operarea trepiedului

2.1 Leveling the Device

• The tripod head includes a circular vial (bubble level) for accurate leveling.
• Adjust the tripod legs and/or the center column until the bubble in the circular vial is centered, indicating a level surface for your laser or level.

Image: Bosch BT 150 Tripod with a Bosch laser level mounted, demonstrating its use.

2.2 Pan and Tilt Adjustments

• Use the pan handle to smoothly rotate the mounted device horizontally (panning).
• Loosen the tilt knob to adjust the vertical angle of the device (tilting). Tighten the knob to secure the desired angle.

3. Întreținere

• curatenie: Ștergeți trepiedul cu o lavetă moale,amp ștergeți o lavetă după fiecare utilizare pentru a îndepărta praful și resturile. Evitați utilizarea substanțelor chimice dure sau a produselor de curățare abrazive.
• Depozitare: Store the tripod in a dry, clean environment. Collapse the legs and center column fully for compact storage.
• Inspecţie: Regularly inspect all clamps, screws, and moving parts for wear or damage. Ensure all components are functioning correctly before use.

4. Depanare

4.1 Center Column Crank Not Adjusting Height

If the crank handle turns but the center column does not adjust, the internal gear may be stripped. This often occurs if the thumb screw (which locks the telescoping pole) is tightened before attempting to adjust the height with the crank. Always loosen the thumb screw before using the crank for height adjustment. If the gear is stripped, replacement parts may not be readily available, and manual adjustment of the pole might be necessary.

5. Specificații

6. Garanție și asistență

The Bosch Professional Tripod BT 150 comes with a 3 an garanție if registered. For detailed warranty information, product support, or service inquiries, please visit the official Bosch website-ul web sau contactați serviciul clienți Bosch.

For additional information and product registration, please refer to the official Bosch website: www.bosch-professional.com